DLA MIL-PRF-15160 10 H-2008 FUSES INSTRUMENT POWER AND TELEPHONE (NONINDICATING) STYLE F10.pdf

1、AMSC N/A FSC 5920 INCH-POUND MIL-PRF-15160/10H 15 October 2008 SUPERSEDING MIL-PRF-15160/10G 7 July 2006 PERFORMANCE SPECIFICATION SHEET FUSES, INSTRUMENT, POWER, AND TELEPHONE (NONINDICATING), STYLE F10 This specification is approved for use by all Departments and Agencies of the Department of Defe

2、nse. The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-PRF-15160. NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for general information only. FIGURE 1. Style F10, characteristics A and B. Inches mm Inches mm 0.004 0.10

3、 0.130 3.30 0.005 0.13 0.200 5.08 0.031 0.79 0.406 10.31 0.050 1.27 1.500 38.10 0.062 1.57 1.731 43.97 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-15160/10H 2 REQUIREMENTS: Interface and physical dimensions: See figure 1. Body: Fiber tube

4、. Ferrule: Brass, copper, or copper alloy. Finish: Nickel, or silver plated when specified. Contact: Characteristic A Red button or tip. Characteristic B Silver plated button or tip. Spring Phosphor bronze, or corrosion-resistant steel. Terminal strength: Method 211 of MIL-STD-202, test condition E,

5、 2 inch-pound torque between ferrules and fuse body. Electrical: Current rating: See table I. Voltage rating: See table I. Characteristic: See table I. Overload interrupt: Characteristic A - Within 1 hour at 135 percent of rated current. Characteristic B - Maximum within 1 hour at 135 percent of rat

6、ed current, and a minimum of 12 seconds at 200 percent. Short circuit ac interrupt: 1,000 amperes. Type designation: Type designation shall be as specified in table I. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-15160/10H 3 TABLE I Type d

7、esignations and electrical rating. 1/ Style Characteristic Maximum voltage Current rating F10 A 250V 1A F10 A 250V 2A F10 A 250V 3A F10 A 250V 4A F10 A 250V 5A F10 A 250V 6A F10 A 250V 8A F10 A 250V 10A F10 A 250V 12A F10 A 250V 15A F10 A 125V 20A F10 A 125V 25A F10 A 125V 30A F10 B 250V 1/10A F10 B

8、 125V 15/100A F10 B 125V 2/10A F10 B 125V 3/10A F10 B 250V 4/10A F10 B 250V 1/2A F10 B 250V 6/10A F10 B 250V 8/10A F10 B 250V 1A F10 B 250V 1 1/4A F10 B 250V 2A F10 B 250V 2 1/2A F10 B 250V 3A F10 B 250V 3 2/10A F10 B 250V 4A F10 B 250V 5A F10 B 250V 5 6/10A F10 B 250V 6 1/4A F10 B 125V 7A F10 B 125

9、V 8A F10 B 125V 10A 1/ For silver plated terminals, the designator “S” is added after the current rating. VERIFICATION: Qualification inspection is not applicable for 12A and 25A characteristic A fuses and all characteristic B fuses of this specification sheet (see table l) and shall be replaced by

10、first article inspection consisting of Group A and Group B inspections of MIL-PRF-15160, prior to delivery. Qualification inspection (Characteristic A only): The number of qualification samples required shall be a. 24 samples maximum current rating of each voltage and design. b. 24 samples minimum c

11、urrent rating of each voltage and design. NOTE: If labels are used, five additional samples of any rating are required. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-15160/10H 4 Cross-reference: For applicable cross-reference see table ll.

12、The existing stocks of superseded items may be used. When exhausted, the superseding parts shall be used. TABLE II. Cross reference. Superseding Superseded numbers for CAGE number 81349 96906 71400 F10A250V 1A 1/ F10G1R00A 1/ MS15453-1 2/ MIN 1 F10A250V 2A F10G2R00A MS15453-2 MIN 2 F10A250V 3A F10G3

13、R00A MS15453-3 MIN 3 F10A250V 4A F10G4R00A MS15453-4 MIN 4 F10A250V 5A F10G5R00A MS15453-5 MIN 5 F10A250V 6A F10G6R00A MS15453-6 MIN 6 F10A250V 8A F10G8R00A MS15453-7 MIN 8 F10A250V 10A F10G10R00A MS15453-8 MIN 10 F10A250V 12A F10G12R00A MS15453-9 MIN 12 F10A250V 15A F10D15R00A MS15453-10 MIN 15 F10

14、A125V 20A F10D20R00A MS15453-11 MIN 20 F10A125V 25A F10D25R00A MIN 25 F10A125V 30A F10D30R00A MIN 30 F10A250V 1/10A FNJ 1/10 F10A250V 15/100A 15/100 F10A250V 2/10A FNJ 2/10 F10A250V 3/10A 3/10 F10A250V 4/10A FNJ 4/10 F10A250V 1/2A 1/2 F10A250V 6/10A FNJ 6/10 F10A250V 8/10A 8/10 F10A250V 1A FNJ 1 F10

15、A250V 1 1/4A FNJ 1 1/4 F10A250V 2A FNJ 2 F10A250V 2 1/2A FNJ 2 1/2 F10A250V 3A FNJ 3 F10A250V 3 2/10A FNJ 3 2/10 F10A250V 4A FNJ 4 F10A250V 5A 5 F10A250V 5 6/10A FNJ 5 6/10 F10A250V 6 1/4A FNJ 6 1/4 F10A250V 7A F10G7R00A FNJ 7 F10A250V 8A F10G8R00A FNJ 8 F10A250V 10A F10G10RA0B FNJ 10 1/ A letter “S

16、” following the part number signifies silver plating. 2/ A second dash number (-1) signifies silver plating. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-15160/10H 5 Referenced documents. In addition to MIL-PRF-15160, this document referen

17、ces the following: MIL-STD-202 The margins of this specification sheet are marked with vertical lines to indicate where changes from the previous issue were made. This was done as a convenience only and the Government assumes no liability whatsoever for any inaccuracies in these notations. Bidders a

18、nd contractors are cautioned to evaluate the requirements of this document based on the entire content irrespective of the marginal notations and relationship to the last previous issue. Custodians: Preparing activity: Army - CR DLA - CC Navy - SH Air Force - 85 (Project 5920-2008-040) DLA - CC Revi

19、ew activities: Army - AT, CR4, MI Navy - AS, CG, MC, OS Air Force - 19, 99 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-