DLA MIL-PRF-19207 4 L-2013 FUSEHOLDERS EXTRACTOR POST TYPE BLOWN FUSE INDICATING TYPE FHL13G.pdf

1、AMSC N/A FSC 5920 MIL-PRF-19207/4L 5 December 2013 SUPERSEDINGMIL-PRF-19207/4K 22 January 2007 PERFORMANCE SPECIFICATION SHEET FUSEHOLDERS, EXTRACTOR POST TYPE, BLOWN FUSE INDICATING, TYPE FHL13G This specification is approved for use by all Departments and Agencies of the Department of Defense The

2、requirements for acquiring the product described herein shall consist of this specification and MIL-PRF-19207. Ltr Inches mm Ltr Inches mm Min Max Min Max Min Max Min Max A 3.650 (REF) 92.71 (REF) H .055 .065 1.40 1.65 B 2.655 (REF) 67.44 (REF) J 2.380 (REF) 60.45 (REF) C .650 (REF) 16.51 (REF) K .0

3、91 .101 2.31 2.57 D 1.000 (REF) 25.40 (REF) L .205 .210 5.21 5.33 E .5000 (REF) 12.70 (REF) M .935 .945 23.75 24.00 F 1.625 1.635 41.28 41.53 N 1.880 1.890 47.75 48.01 G 1.495 1.505 37.97 38.23 P 1.370 1.380 34.80 35.05 NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for general

4、information only. 3. Unless otherwise specified, tolerance is .XXX .005 (.13 mm). FIGURE 1. Type FHL13G fuseholders. INCH-POUND Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-19207/4L 2 REQUIREMENTS: Interface and physical dimensions: See fi

5、gure 1. Cap and body molding material: It is recommended that types MAI-60, GDI-30F or SDG-F of American Society for Testing and Materials ASTM-D5948 be considered for meeting the body molding material requirements of this specification. ASTM-D3935 is also suggested as guidance for cap material. The

6、 military part number is not required on the fuseholder. Fuse accommodation: Ferrule type: Size: 0.563 inch (14.30 mm) diameter, 2 inches (50.8 mm) length. Style: MIL-PRF-15160, F15 and F61. (or equivalent size and style). Poles: One. Rating: 30 amperes, 90 volts to 500 volts. Panel thickness: 0.187

7、 inch (4.75 mm) maximum. Indicating: Neon lamp with clear cap. Lamp series resistors: MIL-PRF-39017/2 two resistors, 160,000 ohms, 0.5 watt, one each lamp lead. Terminals: Stud type, No. 190-24 UNC-2A thread. Enclosure: Dripproof. Test fuses: Temperature rise: F61C500V30A of MIL-PRF-15160/61. Short

8、circuit: F61C500V30A of MIL-PRF-15160/61. Mechanical shock: Method I of MIL-PRF-19207. Terminal strength: 20 pounds. Torque: Terminals and cap insert - 15 inch-pounds. Salt atmosphere (corrosion): Test condition B. Mounting hardware: Screw: .190-24UNC-2A, truss head, 1.5 inches long (38.1 mm) (min)

9、with sealing washer. Nut: .190-24UNC-2B Hex. A threaded metal insert may be used in lieu of nut. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-19207/4L 3 Part or Identifying Number (PIN): FHL13G-001 shall be for the body and supersedes the

10、military part number: M19207/4-001 and FHL13G-002 shall be for the cap and supersedes the military part number M19207/4-002. Referenced documents. In addition to MIL-PRF-19207, this document references the following: MIL-PRF-15160 MIL-PRF-15160/61 MIL-PRF-39017/2 ASTM-D3935 ASTM-D5948 The margins of

11、 this specification are marked with vertical lines to indicate where changes from the previous issue were made. This was done as a convenience only and the Government assumes no liability whatsoever for any inaccuracies in these notations. Bidders and contractors are cautioned to evaluate the requir

12、ements of this document based on the entire content irrespective of the marginal notations and relationship to the last previous issue. Custodians: Preparing Activity: Army - CR DLA - CC Navy - SH Air force - 85 (Project 5920-2012-057) DLA - CC Review Activities: Army - AR, AT, CR4, MI Navy - AS, EC

13、, OS Air Force - 70, 71 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-