DLA MIL-PRF-20 37 F-2011 CAPACITORS FIXED CERAMIC DIELECTRIC (TEMPERATURE COMPENSATING) ESTABLISHED AND NON-ESTABLISHED RELIABILITY STYLES CCR07 AND CC07.pdf

1、AMSC N/A FSC 5910 MIL-PRF-20/37F 21 April 2011 SUPERSEDING MIL-PRF-20/37E 21 June 2001 PERFORMANCE SPECIFICATION SHEET CAPACITORS, FIXED, CERAMIC DIELECTRIC (TEMPERATURE COMPENSATING), ESTABLISHED AND NON-ESTABLISHED RELIABILITY, STYLES CCR07 AND CC07 This specification is approved for use by all De

2、partments and Agencies of the Department of Defense. The requirements for acquiring the capacitors described herein shall consist of this specification sheet and MIL-PRF-20. NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for information only. 3. Lead diameter shall be .025 +.004

3、, -.001 (0.64 +0.10, -0.03 mm). 4. Thickness shall be .200 max (5.08 mm) for 100,000 pF capacitors or .140 .010 (3.56 0.25 mm) for all other capacitors. FIGURE 1. Styles CCR07 and CC07 capacitors. INCH-POUND Style CC07 is inactive for new design after 21 April 2011. Use CCR07. Inches mm .020 0.51 .0

4、30 0.76 .400 10.16 .480 12.19 1.250 31.80 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-20/37F 2 REQUIREMENTS: Dimensions and configuration: See figure 1. Lead type: Radial. Case type: Molded. DC rated voltage: See table I. Operating temper

5、ature range: -55C to +125C. Characteristic: CG. Failure rate level (CCR07 only): M (1.0 percent), P (0.1 percent), R (.01 percent) or S (.001 percent). Thermal shock and voltage conditioning (CCR07 only): In accordance with MIL-PRF-20. Capacitance: Within tolerance specified (see table I). Dissipati

6、on factor: In accordance with MIL-PRF-20. Dielectric withstanding voltage: In accordance with MIL-PRF-20. Body insulation: Test II. TABLE I. Capacitor characteristics. PIN 1/ 2/ Rated voltage (volts, dc) Nominal capacitance (pF) Capacitance tolerance PIN 1/ 2/ Rated voltage (volts, dc) Nominal capac

7、itance (pF) Capacitance tolerance CC-07CG222- CC-07CG272- CC-07CG332- CC-07CG392- CC-07CG472- CC-07CG562- CC-07CG682- CC-07CG822- CC-07CG103- CC-07CG123- CC-07CG153- 200 200 200 200 200 100 100 100 100 100 50 2,200 2,700 3,300 3,900 4,700 5,600 6,800 8,200 10,000 12,000 15,000 FGJK FGJK FGJK FGJK FG

8、JK FGJK FGJK FGJK FGJK FGJK FGJK CC-07CG183- CC-07CG223- CC-07CG273- CC-07CG333- CC-07CG393- CC-07CG473- CC-07CG563- CC-07CG683- CC-07CG823- CC-07CG104- 50 50 50 50 50 50 50 50 50 50 18,000 22,000 27,000 33,000 39,000 47,000 56,000 68,000 82,000 100,000 FGJK FGJK FGJK FGJK FGJK FGJK FGJK FGJK FGJK F

9、GJK 1/ Complete PIN will include the following: 1st dash - Symbol “R” (for style CCR07) or dash will be deleted (for style CC07). 2nd dash - Applicable capacitance tolerance symbol. 3rd dash - Applicable failure rate level symbol (CCR07 only) or dash will be deleted (for style CC07). 2/ Capacitors d

10、eleted since previous revisions shall be replaced by selecting a capacitor with the nearest parameter. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-20/37F 3 Solderability: In accordance with MIL-PRF-20. Resistance to soldering heat: In acc

11、ordance with MIL-PRF-20. Life: In accordance with MIL-PRF-20, operating condition 2. Part or Identifying Number (PIN): In accordance with MIL-PRF-20 and table I. Marking: In accordance with MIL-PRF-20. Changes from previous issue: The margins of this specification sheet are marked with vertical line

12、s to indicate where changes from the previous issue were made. This was done as a convenience only and the Government assumes no liability whatsoever for any inaccuracies in these notations. Bidders and contractors are cautioned to evaluate the requirements of this document based on the entire conte

13、nt irrespective of the marginal notations and relationship to the last previous issue. Custodians: Preparing activity: Army - CR DLA - CC Navy - EC Air Force - 85 (Project 5910-2011-018) DLA - CC Review activities: Army - AV Navy - AS, MC, OS, SH Air Force 99 NOTE: The activities listed above were i

14、nterested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-