DLA MIL-PRF-22885 80 H-2010 SWITCH PUSHBUTTON ILLUMINATED 4-LAMP SOLID MOUNT RFI SHIELDED MOISTURE SEALED HIGH IMPACT SHOCK RESISTANT.pdf

1、AMSC N/A FSC 5930 INCH-POUND MIL-PRF-22885/80H 4 June 2010 SUPERSEDING MIL-PRF-22885/80G 28 April 2004 PERFORMANCE SPECIFICATION SHEET SWITCH, PUSHBUTTON, ILLUMINATED, 4-LAMP SOLID MOUNT, RFI SHIELDED, MOISTURE SEALED, HIGH IMPACT SHOCK RESISTANT This specification sheet is approved for use by all D

2、epartments and Agencies of the Department of Defense. The requirements for acquiring the switches described herein shall consist of this specification sheet and MIL-PRF-22885. DIMENSION A Type 1: 3.15 MAX Type 3: 2.70 MAX NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for genera

3、l information only. 3. Unless otherwise specified, tolerances are .010 (.25 mm). 4. The design configuration is optional within the envelope dimensions shown. FIGURE 1. Switch, 4-lamp, solid mount, type 1 and type 3. Inches mm .075 .250 .30 .740 .975 .990 1.20 2.70 3.15 1.90 6.35 7.6 18.80 24.76 25.

4、15 30.5 68.6 80.0 .975 MAX PANEL MOISTURE SEAL TERMINAL BLOCK Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-22885/80H 2 Inches mm .075 .250 .30 .740 .990 1.20 1.250 1.45 3.15 1.90 6.35 7.6 18.80 25.15 30.5 32.75 36.3 80.0 NOTES: 1. Dimensio

5、ns are inches. 2. Metric equivalents are given for general information only. 3. Unless otherwise specified, tolerances are .010 (.25 mm). 4. The design configuration is optional within the envelope dimensions shown. FIGURE 2. Switch, 4-lamp, solid mount, type 2. Provided by IHSNot for ResaleNo repro

6、duction or networking permitted without license from IHS-,-,-MIL-PRF-22885/80H 3 DIMENSION BTYPE 1 and 2: 2.98 MAXTYPE 3: 2.67 MAXInches mm .740 .990 2.67 2.98 18.80 25.15 67.8 75.7 NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for general information only. 3. Unless otherwise

7、specified, tolerances are .016 (0.41 mm). 4. Location of RFI grounding contact is optional. FIGURE 3. Plug-in switch/indicator assembly. B MAX Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-22885/80H 4 Switch circuitry 4 PDT Momentary and Al

8、ternate Action NOTE: Terminals shall be permanently identified as shown.; FIGURE 4. Switch circuitry schematics. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-22885/80H 5 Terminal part numbers and selection criteria. P/N M22885/80- (package

9、 of 25 terminals) “A” DIA. “B” DIA. Acceptable wire sizes color filters should be acquired separately (see MIL-PRF-22885/82). Part numbers with color filter codes shall not appear on the items, but may be marked on shipping containers. 3/ Numbers indicate color symbol sequence. Provided by IHSNot fo

10、r ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-22885/80H 11 TABLE VII. Supersession data. 1/ Superseded military part number M22885/80- Superseding military part number M22885/80- 19 (X) 20 (XX) 21 (XX) 22 (X) 23 (XX) 24 (XX) 25 (X) 26 (XX) 27 (XX) 28 (X) 29 (XX

11、) 30 (XX) 31 (X) 32 (XX) 33 (XX) 34 (X) 35 (XX) 36 (XX) CAC (X) CAL (XX) CAS (XX) CBC (X) CBL (XX) CBS (XX) CEC (X) CEL (XX) CES (XX) HAC (X) HAL (XX) HAS (XX) HBC (X) HBL (XX) HBS (XX) HEC (X) HEL (XX) HES (XX) 1/ Part numbers are shown for units without color filters. When color filters are includ

12、ed, the color symbols of table II are added in place of (X) or (XX) in the sequence shown in table VI. TABLE VIII. Inactive part numbers. 1/ Part number 2/ M22885/80- Configuration (see table IV) Contact action (see table V) Lens style and lamp circuit (see table VI) 01 (X) 02 (XX) 03 (XX) 04 (X) 05

13、 (XX) 06 (XX) 07 (X) 08 (XX) 09 (XX) 10 (X) 11 (XX) 12 (XX) 13 (X) 14 (XX) 15 (XX) 16 (X) 17 (XX) 18 (XX) A A A A A A A A A F F F F F F F F F A A A B B B E E E A A A B B B E E E C L S C L S C L S C L S C L S C L S 1/ These part numbers are inactive for new design. They cover switches with black pain

14、ted housing bezel. 2/ Part numbers are shown for units without color filters. When color filters are included, the color symbols of table II are added in place of (X) or (XX) in the sequence shown in table VI. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from

15、IHS-,-,-MIL-PRF-22885/80H 12 Referenced Documents: MIL-PRF-22885 MIL-PRF-22885/82 MIL-DTL-22520 MIL-S-24317/8 The margins of this specification are marked with vertical lines to indicate where modifications from this revision were made. This was done as a convenience only and the Government assumes

16、no liability whatsoever for any inaccuracies in these notations. Bidders and contractors are cautioned to evaluate the requirements of this document based on the entire content irrespective of the marginal notations. Custodians: Preparing activity: Army - CR DLA - CC Navy - EC Air Force - 85 DLA - C

17、C (Project 5930-2009-021) Review activities: Army - AR, AV, MI Navy - AS, MC, OS, SH Air Force - 19, 99 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.daps.dla.mil/ . Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-