DLA MIL-PRF-39006 33 A-2012 CAPACITORS FIXED ELECTROLYTIC (NONSOLID ELECTROLYTE) TANTALUM (POLARIZED SINTERED SLUG) (EXTENDED RANGE) 85癈 (VOLTAGE DERATED TO 125癈) ESTABLISHED RELI.pdf

1、AMSC N/A FSC 5910 INCH-POUND MIL-PRF-39006/33A 01 June 2012 SUPERSEDING MIL-PRF-39006/33 29 January 2010 PERFORMANCE SPECIFICATION SHEET CAPACITORS, FIXED, ELECTROLYTIC (NONSOLID ELECTROLYTE), TANTALUM, (POLARIZED, SINTERED SLUG), (EXTENDED RANGE), 85C (VOLTAGE DERATED TO 125C), ESTABLISHED RELIABIL

2、ITY, STYLE CLR93 This specification sheet is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-PRF-39006. NOTES: 1. Dimensions are in inches. 2. Metric equivalen

3、ts are in parentheses. 3. Metric equivalents are given for general information only. 4. The weld shall not be enclosed in the end seal. FIGURE 1. Style CLR93 capacitors. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-39006/33A 2 Case Size 2/

4、 Dimensions Basic case Insulated case E .250 (6.35) L 1/ +.031 (0.79) -.016 (0.41) D .016 (0.41) D max T1 .453 (11.51) .188 (4.78) .219 ( 5.56) 1.500 (38.10) T2 .641 (16.28) .281 (7.14) .312 ( 7.92) 2.250 (57.15) T3 .766 (19.46) .375 (9.52) .406 (10.31) 2.250 (57.15) T4 1.062 (26.97) .375 (9.52) .40

5、6 (10.31) 2.250 (57.15) L2 1.008 (25.60) .281 (7.14) .312 (7.92) 2.250 (57.15) 1/ Length of basic case sleeving shall be as specified in MIL-PRF-39006. 2/ Dimensions are in inches, millimeters are in parentheses. FIGURE 1. Style CLR93 capacitors - Continued. REQUIREMENTS: Design and construction: Di

6、mensions and configuration: See figure 1. Case type: Tantalum, tubular, insulated. Seal type: Hermetic (glass-to-tantalum anode). Terminals: Axial-wire lead: Cathode and anode (type N32, N51, or N52 of MIL-STD-1276). Rated temperature: -55C to +85C, voltage de-rated to +125C (see figure 2). FIGURE 2

7、. Voltage derating with temperature. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-39006/33A 3 Rated voltage: See table I. Capacitance (Cap.) nominal (nom): See table I. Cap. tolerance: 10 percent or 20 percent (see table I). FR level: M, P

8、, R, and S (see table I). DC leakage (DCL) (max) (at +25C): See table I. Equivalent Series Resistance (ESR) (max): See table I. Cap. (nominal): Method 305 of MIL-STD-202. Seal: Method 112 of MIL-STD-202, conditions A or D, and C. Shock (specified pulse): Method 213 of MIL-STD-202, condition I (100 g

9、s). Vibration, high frequency: Method 204 of MIL-STD-202, condition D (20 gs). Random vibration (not applicable). Thermal shock: Method 107 of MIL-STD-202, condition A (with step 3 at +125C). Number of cycles: In accordance with MIL-PRF-39006, the following shall apply: DCL: 200 percent (max) of +25

10、C value of table I for qualification and group C. DCL: 125 percent (max) of +25C value of table I for group B. Cap: Within 5 percent of initial measurement. ESR: 115 percent (max) of initial requirement. Salt atmosphere (corrosion): Method 101 of MIL-STD-202, condition B (48 hours). Solderability: M

11、ethod 208 of MIL-STD-202. Terminal strength: Pull: Method 211 of MIL-STD-202, condition A. Wire-lead bend: In accordance with MIL-PRF-39006. Surge voltage: See table I. Moisture resistance: Method 106 of MIL-STD-202. DCL: 125 percent (max) of +25C value of table I. Cap: Within 8 percent of initial m

12、easurement. ESR: 115 percent (max) of initial requirement. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TABLE I. Capacitor characteristics Rated voltage (+85C) 1/ Cap. Cap. toler-ance DC leakage (max) Dissi-pation factor (max) 2/ ESR at +25C (max)

13、 Derated voltage (+125C) 1/ Surge voltage (+85C) Imped- ance (max) Capacitance change at Max +85C 40 kHz ripple current 3/ Case size PIN M39006/33- +25C +85C, +125C -55C +85C +125C Failure rate level (%/1,000 hour) M(1.0) P(0.1) R(0.01) S(0.001) V dc F percent A A percent Ohms V dc V dc Ohms percent

14、 percent percent mA rms 25 120 +20 1 5 14.1 1.3 15 28.8 25 -42 8 12 1250 T1 0001 1001 2001 3001 25 120 +10 1 5 14.1 1.3 15 28.8 25 -42 8 12 1250 T1 0002 1002 2002 3002 25 560 +20 2 10 42.1 0.83 15 28.8 12 -65 10 15 2100 T2 0003 1003 2003 3003 25 560 +10 2 10 42.1 0.83 15 28.8 12 -65 10 15 2100 T2 00

15、04 1004 2004 3004 25 1100 +20 3 25 49.8 0.5 15 28.8 7 -60 20 45 3200 L2 0005 1005 2005 3005 25 1100 +10 3 25 49.8 0.5 15 28.8 7 -60 20 45 3200 L2 0006 1006 2006 3006 25 1200 +20 5 20 70.6 0.65 15 28.8 7 -70 12 18 2600 T3 0007 1007 2007 3007 25 1200 +10 5 20 70.6 0.65 15 28.8 7 -70 12 18 2600 T3 0008

16、 1008 2008 3008 25 1800 +20 6 25 81.4 0.5 15 28.8 7 -75 12 20 3100 T4 0009 1009 2009 3009 25 1800 +10 6 25 81.4 0.5 15 28.8 7 -75 12 20 3100 T4 0010 1010 2010 3010 30 100 +20 1 5 11.8 1.3 20 34.5 25 -38 8 12 1200 T1 0011 1011 2011 3011 30 100 +10 1 5 11.8 1.3 20 34.5 25 -38 8 12 1200 T1 0012 1012 20

17、12 3012 30 470 +20 2 10 36.1 0.85 20 34.5 15 -65 10 18 1800 T2 0013 1013 2013 3013 30 470 +10 2 10 36.1 0.85 20 34.5 15 -65 10 18 1800 T2 0014 1014 2014 3014 30 950 +20 5 30 43.0 0.5 20 34.5 7 -55 18 35 3200 L2 0015 1015 2015 3015 30 950 +10 5 30 43.0 0.5 20 34.5 7 -55 18 35 3200 L2 0016 1016 2016 3

18、016 30 1000 +20 7 25 63.3 0.7 20 34.5 7 -70 10 18 2500 T3 0017 1017 2017 3017 30 1000 +10 7 25 63.3 0.7 20 34.5 7 -70 10 18 2500 T3 0018 1018 2018 3018 30 1500 +20 12 35 81.4 0.6 20 34.5 6 -72 10 20 3000 T4 0019 1019 2019 3019 30 1500 +10 12 35 81.4 0.6 20 34.5 6 -72 10 20 3000 T4 0020 1020 2020 302

19、0 50 68 +20 1 5 9.2 1.5 30 57.5 35 -25 8 15 1050 T1 0021 1021 2021 3021 50 68 +10 1 5 9.2 1.5 30 57.5 35 -25 8 15 1050 T1 0022 1022 2022 3022 50 220 +20 2 10 17.9 0.9 30 57.5 17.5 -50 8 15 1800 T2 0023 1023 2023 3023 50 220 +10 2 10 17.9 0.9 30 57.5 17.5 -50 8 15 1800 T2 0024 1024 2024 3024 50 450 +

20、20 3 25 24.4 0.6 30 57.5 7.5 -45 12 30 2900 L2 0025 1025 2025 3025 50 450 +10 3 25 24.4 0.6 30 57.5 7.5 -45 12 30 2900 L2 0026 1026 2026 3026 50 470 +20 3 25 31.9 0.75 30 57.5 10 -50 8 15 2100 T3 0027 1027 2027 3027 50 470 +10 3 25 31.9 0.75 30 57.5 10 -50 8 15 2100 T3 0028 1028 2028 3028 50 680 +20

21、 5 40 43.1 0.7 30 57.5 10 -58 10 20 2750 T4 0029 1029 2029 3029 50 680 +10 5 40 43.1 0.7 30 57.5 10 -58 10 20 2750 T4 0030 1030 2030 3030 See footnotes at end of table. MIL-PRF-39006/33A4Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TABLE I. Capaci

22、tor characteristics - Continued. Rated voltage (+85C) 1/ Cap. Cap. toler-ance DC leakage (max) Dissi-pation factor (max) 2/ ESR at +25C (max) Derated voltage (+125C) 1/ Surge voltage (+85C) Imped- ance (max) Capacitance change at Max +85C 40 kHz ripple current 3/ Case size PIN M39006/33- +25C +85C,

23、+125C -55C +85C +125C Failure rate level (%/1,000 hour) M(1.0) P(0.1) R(0.01) S(0.001) V dc F percent A A percent Ohms V dc V dc Ohms percent percent percent mA rms 60 47 +20 1 5 8.5 2 40 69 44 -25 8 12 1050 T1 0031 1031 2031 3031 60 47 +10 1 5 8.5 2 40 69 44 -25 8 12 1050 T1 0032 1032 2032 3032 60

24、150 +20 2 10 14.9 1.1 40 69 20 -40 8 15 1650 T2 0033 1033 2033 3033 60 150 +10 2 10 14.9 1.1 40 69 20 -40 8 15 1650 T2 0034 1034 2034 3034 60 370 +20 3 25 20.1 0.6 40 69 9 -33 9 20 2900 L2 0035 1035 2035 3035 60 370 +10 3 25 20.1 0.6 40 69 9 -33 9 20 2900 L2 0036 1036 2036 3036 60 390 +20 3 25 31.8

25、0.9 40 69 15 -60 8 15 2100 T3 0037 1037 2037 3037 60 390 +10 3 25 31.8 0.9 40 69 15 -60 8 15 2100 T3 0038 1038 2038 3038 60 560 +20 5 40 40.5 0.8 40 69 10 -58 8 15 2750 T4 0039 1039 2039 3039 60 560 +10 5 40 40.5 0.8 40 69 10 -58 8 15 2750 T4 0040 1040 2040 3040 75 33 +20 1 5 7.5 2.5 50 86.2 66 -25

26、5 9 1050 T1 0041 1041 2041 3041 75 33 +10 1 5 7.5 2.5 50 86.2 66 -25 5 9 1050 T1 0042 1042 2042 3042 75 110 +20 2 10 12.9 1.3 50 86.2 24 -35 6 10 1650 T2 0043 1043 2043 3043 75 110 +10 2 10 12.9 1.3 50 86.2 24 -35 6 10 1650 T2 0044 1044 2044 3044 75 250 +20 5 30 18.1 0.8 50 86.2 12 -30 6 15 2500 L2

27、0045 1045 2045 3045 75 250 +10 5 30 18.1 0.8 50 86.2 12 -30 6 15 2500 L2 0046 1046 2046 3046 75 330 +20 3 30 29.9 1 50 86.2 12 -45 6 10 2100 T3 0047 1047 2047 3047 75 330 +10 3 30 29.9 1 50 86.2 12 -45 6 10 2100 T3 0048 1048 2048 3048 75 470 +20 5 50 38.3 0.9 50 86.2 12 -55 8 12 2750 T4 0049 1049 20

28、49 3049 75 470 +10 5 50 38.3 0.9 50 86.2 12 -55 8 12 2750 T4 0050 1050 2050 3050 100 15 +20 1 5 4.8 3.5 65 115 125 -18 3 10 1050 T1 0051 1051 2051 3051 100 15 +10 1 5 4.8 3.5 65 115 125 -18 3 10 1050 T1 0052 1052 2052 3052 100 68 +20 2 10 12.9 2.1 65 115 37 -30 4 12 1650 T2 0053 1053 2053 3053 100 6

29、8 +10 2 10 12.9 2.1 65 115 37 -30 4 12 1650 T2 0054 1054 2054 3054 100 120 +20 3 25 10.9 1 65 115 20.5 -30 4 12 2200 L2 0055 1055 2055 3055 100 120 +10 3 25 10.9 1 65 115 20.5 -30 4 12 2200 L2 0056 1056 2056 3056 100 150 +20 3 25 21.7 1.6 65 115 22 -35 6 12 2100 T3 0057 1057 2057 3057 100 150 +10 3

30、25 21.7 1.6 65 115 22 -35 6 12 2100 T3 0058 1058 2058 3058 100 220 +20 5 50 23.9 1.2 65 115 15 -40 6 12 2750 T4 0059 1059 2059 3059 100 220 +10 5 50 23.9 1.2 65 115 15 -40 6 12 2750 T4 0060 1060 2060 3060 See footnotes at end of table. MIL-PRF-39006/33A5Provided by IHSNot for ResaleNo reproduction o

31、r networking permitted without license from IHS-,-,-TABLE I. Capacitor characteristics - Continued. Rated voltage (+85C) 1/ Cap. Cap. toler-ance DC leakage (max) Dissi-pation factor (max) 2/ ESR at +25C (max) Derated voltage (+125C) 1/ Surge voltage (+85C) Imped- ance (max) Capacitance change at Max

32、 +85C 40 kHz ripple current 3/ Case size PIN M39006/33- +25C +85C, +125C -55C +85C +125C Failure rate level (%/1,000 hour) M(1.0) P(0.1) R(0.01) S(0.001) V dc F percent A A percent Ohms V dc V dc Ohms percent percent percent mA rms 125 10 +20 1 5 5.0 5.5 85 144 175 -15 3 10 1050 T1 0061 1061 2061 30

33、61 125 10 +10 1 5 5.0 5.5 85 144 175 -15 3 10 1050 T1 0062 1062 2062 3062 125 47 +20 2 10 9.8 2.3 85 144 47 -25 5 12 1650 T2 0063 1063 2063 3063 125 47 +10 2 10 9.8 2.3 85 144 47 -25 5 12 1650 T2 0064 1064 2064 3064 125 90 +20 5 25 10.6 1.3 85 144 25 -22 4 15 2000 L2 0065 1065 2065 3065 125 90 +10 5

34、 25 10.6 1.3 85 144 25 -22 4 15 2000 L2 0066 1066 2066 3066 125 100 +20 3 25 16.3 1.8 85 144 35 -35 5 12 2100 T3 0067 1067 2067 3067 125 100 +10 3 25 16.3 1.8 85 144 35 -35 5 12 2100 T3 0068 1068 2068 3068 125 150 +20 5 50 21.7 1.6 85 144 20 -40 6 12 2750 T4 0069 1069 2069 3069 125 150 +10 5 50 21.7

35、 1.6 85 144 20 -40 6 12 2750 T4 0070 1070 2070 3070 1/ Reverse voltage: There shall be no continuous reverse voltage. Transient reverse voltage surges are acceptable under the following conditions: a. The peak reverse voltage is equal to or less than 1.5 volts and the product of the peak current tim

36、es the duration of the reverse transient is 0.05 ampere-seconds or less. b. The repetition rate of the reverse voltage surges is less than 10 Hz. 2/ DF is calculated from ESR and is for reference only, calculated by the equation: DF=(ESRmax)(2)(f)(C) where: ESR = actual measured ESR 2 = 6.28 f = 120

37、 Hz C = Actual measured capacitance. 3/ For ripple current limits at various temperatures, voltages, and frequencies, see table II. 6MIL-PRF-39006/33AProvided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TABLE II. Ripple current multipliers versus frequenc

38、y, temperature, and applied peak voltage. 1/ 2/ 3/ 4/ 5/ Frequency of applied ripple current Ambient still air 120 Hz 800 Hz 1 kHz 10 kHz 40 kHz 100 kHz Temp C Temp C Temp C Temp C Temp C Temp C +55 +85 +105 +125 +55 +85 +105 +125 +55 +85 +105 +125 +55 +85 +105 +125 +55 +85 +105 +125 +55 +85 +105 +1

39、25 6/ 100 percent 90 percent 80 percent 70 percent 66 2/3 percent .60 .60 .60 .60 .60 .39 .46 .52 .58 .60 - - .35 .44 .46 - - - - .27 .71 .71 .71 .71 .71 .43 .55 .62 .69 .71 - - .42 .52 .55 - - - - .32 .72 .72 .72 .72 .72 .45 .55 .62 .70 .72 - - .42 .52 .55 - - - - .32 .88 .88 .88 .88 .88 .55 .67 .7

40、6 .85 .88 - - .52 .64 .68 - - - - .40 1.0 1.0 1.0 1.0 1.0 .63 .77 .87 .97 1.0 - - .59 .73 .77 - - - - .45 1.1 1.1 1.1 1.1 1.1 .69 .85 .96 1.07 1.1 - - .65 .80 .85 - - - - .50 1/ At +125C, the rated voltage of the capacitors decreases to 66.67 percent of the +85C rated voltage. 2/ The peak of the app

41、lied ac ripple voltage plus the applied dc voltage must not exceed the dc voltage rating of the capacitor either forward or reverse. 3/ The ripple current listed in table I represents a rating calculated by using a maximum internal temperature rise (T) at +50C at 40 kHz and at +85C ambient temperatu

42、re, with a maximum peak rated voltage of 66.67 percent of the +85C peak voltage rating. 4/ The maximum allowable internal temperature rise (T) decreases linearly to a calculated 10C rise at +125C ambient. 5/ The internal temperature rise is directly proportional to the ESR of the capacitor, and ESR

43、increases with decreasing frequency. 6/ Percentage of +85C rated peak voltage. 7MIL-PRF-39006/33AProvided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-39006/33A 8 Dielectric withstanding voltage (DWV): Method 301 of MIL-STD-202. 2,000 V dc, minimum

44、. Insulation resistance (IR): Method 302 of MIL-STD-202, condition B. 100 megohms, minimum. Low temperature (storage): Method 502 of MIL-STD-810. DCL: See table I. Cap: Within 5 percent of initial measurement. ESR: See table I. Stability at low and high temperatures: Step 1 (+25C): DCL: See table I.

45、 Cap: Within tolerance of table I value. ESR: See table I. Step 2 (-55C): Impedance. See table I. Cap: See table I. Step 3 (+25C): DCL: See table I. Cap: Within 5 percent of step 1 value. ESR: See table I. Step 4 (+85C): DCL: See table I. Cap: See table I. ESR: See table I. Step 5 (+125C): DCL: See

46、table I. Cap: See table I. ESR: See table I. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-39006/33A 9 Step 6 (+25C): DCL: See table I. Cap: Within 5 percent of step 1 value. ESR: See table I. Reverse voltage: Not applicable. Life at +85C:

47、Method 108 of MIL-STD-202. 2,000 hours (qualification): DCL: See table I. Cap: Within 10 percent of initial measurement. ESR: See table I. 10,000 hours (group B) and extended life: DCL (+85C): 125 percent (max) of table I value. DCL (+25C): See table I. Cap: Within +10 percent, -20 percent of initia

48、l measurement. ESR: 200 percent (max) of table I value. DWV: 2,000 V dc, minimum. IR.: 100 megohms, minimum. AC ripple life at +85C (qualification and group C): Test ripple current: See table I. Test voltage: 66.67 percent of rated voltage (see table I). DCL: See table I. Cap: Within 10 percent of initial measurement. ESR: See table I. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,