DLA MIL-T-43654 D-1991 TROUSERS SNOW CAMOUFLAGE WHITE [Use In Lieu Of DLA MIL-T-0043654 E CANC NOTICE 1]《白色雪地伪装裤》.pdf

1、MIL-T-43654D 84 9999906 0474729 4 1 INCH-ument Improvement Proposal (DD Form 1426) appearing at the end of this document or by letter. MSC NIA Fsc 8415 DISTRION STATEMENT A. -roved for publicxelease; distribution is unlimited. Provided by IHSNot for ResaleNo reproduction or networking permitted with

2、out license from IHS-,-,-MIL-T-43654D 4 II 9993906 0474730 O =* MIL-T-43654D 2.1.1 Specifications, standards, and handbooks. The following specifica- I tions, standards and handbooks fonn a part of this doczunent to the extent specified herein. ae those listed in the issue of the Department of Defen

3、se Index of Specifications and Standards (DODISS) and supplement thereto, cited in the solicitation (see 6.2). Unless otherwise specified, the issues of these documents SPECIFICATIONS FEDERIL A-A-50083 A-i-5 O 19 8 A-A-50199 V-B-87 1 V-F-106 DDD-L-20 PPP-B- 6 3 6 MILITARY MIL-B-371 MIL-T-3530 MIL-C-

4、 39 2 4 MIL-F-10884 MIL-L-35078 MIL-T-43566 STANDARDS FEDERAL FED-STD-751 MILITARY MIL-STD-105 MIL-STD-129 MIL-STD-147 MIL-STD-731 Bag, Plastic, Folded Garment Thread, Gimp, Cotton, Buttonhole Thread, Polyester Core, Cotton- or Polyester- Eutton, Sewing Hole, and Button, Staple, (Plastic) Fastener,

5、Slide, Interlocking label: Boxes, Snipping, Fiberboard r I 5 Covsred For Clothing, Equipage and Tentage, (General Use) Braid, Textile, Tubular Thread and “cine, Mildew Resistant or Water Repllent Treated Cloth, Oxford, Cotton Warp and Nylon Filling, Quarpel Treated Fasteners, Snap Loads, Unit; Prepa

6、ration of Semiperishable Subsistence Items; Clothing, Personal Equipnent, and Equipage; General Specification For Tape, Textile, Cotton or Polyester, General mirpose, Natural or in Colors i Stitches, Seams, and Stitchings Sampling Procedures and Tables for Inspection by Marking for Shipnent and Stor

7、age Palletized Unit Loads . Quality of Wood Members for Containers and Pallets. Attributes MIL-STD-1488 - Provisions for Evaluating Quality of Trousers 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-T-43b54D 4 779990b 0974733 2 ills MIL-T-4365

8、4D (Unless otherwise indicated, copies of federal and military specifications, standards, and handbooks are available from the Standardization Documents Order Desk, Building 4D, 700 Robbins .Avenue, Philadelphia, PA 19111-5094,) 2.2 Non-Government publications. The following documents form a part of

9、 this document to the extent specified herein, the issues o the documents which are DOD adopted are those listed in the issue of the DODISS cited in the solicitation, Unless otherwise specified, the issues of documents not listed in the DODISS are the issues of fAe documents cited in the solicitatio

10、n (see 6.2). Unless otherwise specified, I AMERICAN SOCIETY FOR TESTING AM MATERIALS (ASIM) D 3951 - Standard Practice for Comrtercial Packaging Testing and Materials, 1916 Race Street, Philadelphia, PA 19103-1187.) (Application for copies should be addressed to the American Society for (Non-Govenun

11、ent standards and otner publications are normally available from the organizations that prepare or distribute the docziments. documents also my be available in or through libraries or other informa- tional services.) this document and the references cited herein, the text of this document takes prec

12、edence. laws and regul.ations unless a spific exemption has been obtained. These 2.3 Order of precedence. In the event of a conflict between the text of Nothing in this document, hawever, supersedes applicable 3,l First article. Wien specified (see 6.2), a sample shall be subjected to first article

13、inspection (see 6.3) in accordance with 4.3. Guide samples, when furnished, are solely for guidance and information to the contractor (see 6.4). Variation from this specifica- tion may appear in the sample, in which case this specification shall govern. 3.2 Guide sample. 3-3 Materials. It is encoura

14、ged tht recycled material be used when practical as long as it meets the requirements of this specification. 3.3.1 Basic material. The basic material shall be cotton warp and nylon filling oxford cloth, quarpel treated, conforming to class 1 of MIL-C-3924. 3.3.2 Braid, textile (tubular). The braid f

15、or leg hem and waistband drawcords shall confornto typ? IV, class 2, 4/32 inch diameter, and the braid for the slide fastener thong and suspender loops shall conform to type III, class 2, 6/32 inch wide of MIL-B-371. The braid shall be unbleached or 3 Provided by IHSNot for ResaleNo reproduction or

16、networking permitted without license from IHS-,-,-MIL-T-43654D 84 W 9999906 0474732 4 W MIL-T-4 3654D bleached. thong shall be dipped or impregnated with cellulose acetate or cellulose butyrate, to prevent ravelling. least 1/2 inch in length. The ends of the leg hem and waistband drawcords and slide

17、 fastener The dipped or impregnated end shall be at 3.3.3 Taw. The cotton tape for the waistband eyelet reinforcement pieces, waistband button tabs and snap fastener reinforcement pieces for side openings and hip pocket shall be 1-inch wide, conforming to type I, class 1 (natural) or class 2 (bleach

18、ed) of MIL-T-43566. 3.3.4 Thread. The thread for seaming and stitching shall be cotton-or polyester-covered polyester core conforming to ticket numbers 30, 2 or 3 ply, 50, 2 ply and 70, 2 ply of A-A-50199. The color shall be bleached white, AH, C.A. 66050. type II, class 3 of MIL-T-3530. The thread

19、shall be water repellent treated in accordance with 3.3.5 Gimp. The cotton gimp for reinforcing buttonholes shall be natural or bleached, conforming to size No. 8, type I or II of A-A-50198. 3.3.6 Labels. Each trouser shall have an identification label, a size label, an instruction label or combinat

20、ion identification and instruction label or combination size, identification and instruction label conforming to DDD-L-20. The labels shall show fastness to laundering. 3.3.6.1 Identification label. The identification label shall conform to type VI, class 1. 3.3.6.2 Size label. The size label shall

21、confomto type VI, class 2, and shall contain the following information for each respective size. tive information shall be printed in characters not less than 10 point. Descrip- X-Small - Short Waist: Below 27 inches Inseam: p to 29-1/2 in. Stock No. Small - Short Waist: From 27 to 31 in. Inseam: p

22、to 29-1/2 in. Stock No. Medium - Short Waist: From 31to 35 in. Inseam: p to 29-1/2 in. Stock No. X-Small - Recnilar Waist: Below 27 inches Inseam: 29-1/2 to 32-1/2 in. Stock No. Small - Reqlar Waist: From 27 to 31 in. Inseam: 29-1/2 to 32-1/2 in. Stock No. Medium - Reqular Waist: From 31to 35 in. ,

23、Inseam: 29-1/2 to 32-1/2 in. Stock No. X-Small - Lonq Waist: Below 27 Inseam: Over 32-1/2 in. Stock No. Small - Lonq Waist: From 27 to 31 in. Inseam: Over 32-1/2 in. Stock No. Medium - mnq Waist: Fra 31to 35 in. Inseam: Over 32-1/2 in. Stock No. 4 Provided by IHSNot for ResaleNo reproduction or netw

24、orking permitted without license from IHS-,-,- MIL-T-43b54D 84 M 9979906 0474733 b M Larqe - Short e. MIL-T-43654D Larqe - Reqular Larqe - Wnq Waist: From 35 to 39 in. Waist: From 35 to 39 in. Waist: From 35 to 39 in. Inseam: p to 29-1/2 in. Inseam: 29-1/2 to 32-1/2 in. Inseam: Over 32-1/2 in. Stock

25、 No. Stock No. Stock No. X-arqe - Short X-Larqe - Reqular X-Lnrqe - Lonq Waist: From 39 to 43 in. Waist: From 39 to 43 in. Waist: From 39 to 43 in. Inseam: pto 29-1/2 in. Inseam: 29-1/2 to 32-1/2 in. Inseam: Over 32-1/2 in. P Stock No. Stock No. Stock No. l 3.3.6.3 Instruction label. The instruction

26、 label shall conform to type VI, class 3, and shall contain the following information: 1. 2. 3. 4. 5. 6. 7. 8. 9. Wear as the outer garment in cold-dry climate. Button in liner for extra warmth. Attach suspender hooks to suspender loops, Adjust waist by drawcord. Wear leg bottoms outside footgear an

27、d secure drawcords. Brush off snow and frost before entering heated shelters. Lubricate slide fastener with wax. For cleaning and restoring of water repellancy, return to laundry Remove when damp or wet, and allow to dry. for machine washing in accordance with established procedures for quarpel trea

28、ted garments. Do “J! STAWH. Do “J! REMOVE THIS LABEL 3.3.6.4 Combination label. The identification label (class 1) and instruction label (class 3) may be combined into one label conforming to type VI, class 15 of DDD-L-20. 3.3.6.5 Combination size, identification, and instruction label. The identifi

29、cation label (class l), size label (class 2), and instruction label (class 3) may be combined into one label. conform to type VI, class 14 of DDD-L-20. The combination label shall 3.3.7 Slide fastener. The slide fastener shall be type I, style 3, size MS, short tab pull, brass chain conforming to V-

30、F-106. natural or bleached, The tape shall be 3.3.8 Buttons. The buttons shall be type II, class D, style 26, 3O-line, White EN, Cable 62031, dull finish, conforming to V-B-871. 5 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-T-Y3b54D 4 W 99994

31、0b 0474734 8 M . MIL-T-43654D 3.3.9 Snap fasteners. The snap fasteners for side openings and hip pocket shall be brass, style 2A, finish 2, male and female complete, consisting of stud and eyelet, size 1 or 2, with button size 1 or 2 and socket conforming to MIL-F-10884, except an uncapped button sh

32、all be used to attach the socket. 3.4 Desim. The trousers shall have side hand openings with flaps and right hip pocket with flap (all having snap fastener closures), suspnder loops, inside button tabs, waistband and leg drawconk (see figure 1). Figure 1 is furnished solely for guidance and informat

33、ion. Should variation from the written specification appear in the figure, the written specification shall govern. inch for double needle joining seams and 3/8 inch seam allowance for all other seams, except where otherwise specified will be furnished by the Government. contractors working patterns

34、and shall not be altered in my way. working patterns shall be identical to the standard patterns! 3.6.1 List of pattern part s. cut fromthe material specified according to the number of parts listed in table I. 3.5 Fime. 3.6 Patterns, Standard patterns, which provide a seam allawance of 1/2 The stan

35、- patterns are provided as a guide for cutting the The The coniponent parts of the trousers shall be TABLE I. List of pattern part S. cut Part S Material Pattern nomenclature Cloth, oxford, cotton Front 2 warp and nylon filing Back 2 Hip pocket 1 Side opening flap 2 Side opening flap lining 2 Side c

36、pening facing 2 FlY 4 1 Hip pocket flap 3.7 Construction, 3.7.1 Stitches, seams, and stitchinus, Stitch, seam and stitchhg types specified in table II are those covered by FED-STD-751. Whenever two or mre seam or stitch typss are given or the same part of the operation, any one of them my be used. W

37、hen stitch type 401 is used, the looper (underjthrezd) shall be one the inside of the trousers. Seam allawances shall be maintained with seams sewn so that no raw edges, run-Offs, twist, pleats, puckers or open seams will result. TWe?.d tension shall be maintained so that there is no tight or loose

38、tension, All seams shall start and finish evenly. 6 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-T-43b54D 4 999990b 0474735 T MIL-T-4 3654D - Unless otherwise indicated, the gage of stitching for double-needle seams shall be 1/4 to 5/16 inch w

39、ith the outer row of stitching 1/16 to 1/8 inch from edge, The bight of the overedge stitching shall be 1/8 to 3/16 inch. When a knife is used on overedging machine, set guide so that the edge of fabric is not cut off but only the raw edge is trirmied when overedge. inch shall be as specified in tab

40、le II. 3.7.2 Stitchinq per inch. The minimum and maximum number of stitches per 3.7.3 ,Thread breaks and ends of seams. Ends of all seams and stitchings prITY AS- PFOVISIONS 4.1 Resmnsibility for inspection. Unless otherwise specified in the contract or purchase order, the contractor is responsible

41、for the performance of all inspection requirements (examinations and tests) as specified herein. Except as otherwise specified in the contract or purchase order, the contractor may use his awn or any other facilities suitable for the perform- ance of the inspection requirements specified herein, unl

42、ess disapproved by the Goverment. The Govenunent reserves the right to perform any of the inspections set forth in the document where such inspections are deanxi necessary to ensure supplies and services conform to prescribed requirements. 4.1.1 Responsibility for compliance. All items must mt all r

43、equirements of sections 3 and 5. become a part of the contractors overall inspection system or quality program. shall not relieve the contractor of the responsjbility of ensuring that all products or supplies sWtted to the Government for acceptance comply with all requirements of the contract. Sampl

44、ing inspection, as part of manufac- turing operations, is an acceptable practice to ascertain conforniance to requirements, hawever this does not authorize sulmission of huwn defective material, either indicted or actual, nor does it c incorrect; illegible; of improper size, location, sequence, or m

45、ethod of application 5. PACKAGING 5.1 Preservation. Preservagion shall be level A or Comnercial, as 5.1.1 Level A preservation. specified (see 6.2). shall be folded from the leg bottom up tmard the waistband right side out to an overall length of approximately 23 inches. For the larger sizes it my b

46、e necessary to adjust the seat area to achieve the desired width of approximately 14-1/2 inches. own plastic bag in accordance with A-A-50083. Each pair of trousers, with inseams meeting, Each pair of trousers shall be placed in its 25 Provided by IHSNot for ResaleNo reproduction or networking permi

47、tted without license from IHS-,-,-MIL-T-43654D AY 9999906 0474754 3 MIL-T-43654D 5.1.2 Comnercial preservation. The trousers shall be preserved in accordance with ASIM D 3951. 5.2 Packing. Packing shall be level A, B, or Corniercial, as specified (see 6.2). 5.2.1 &vel A packing. Forty pairs of trous

48、ers of one type and size only, preserved as specifid in 5.1, shall be packed in a snug-fitting fiberboard shipping container conforming to style RE-L, grade V2s of PPP-B-636. inside of each shipping container shall be fitted with a box liner conforming to type CF, class weather-resistant, variety DW

49、, grade V15c of PPP-B-636. Inside dimensions of each shipping container shall approximate 23-1/2 inches in length, 15 inches in width, and 15 inches in depth. dimensions are furnished as a guide only. closed in accordance with methcd III, water-proofed in accordance with methd V, and reinforced as specified in the appendix of PPP-B-636, except that the inspection shall be in accordance with 4.4.4. arranged in unit loads in