DLA MS3180 REV G-2012 CONNECTORS ELECTRICAL CIRCULAR COVER PROTECTIVE PLUG MIL-DTL-26482 SERIES 1 AND 2 BAYONET COUPLING.pdf

1、 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRICAL CIRCULAR, COVER, PROTECTIVE, PLUG, MIL-DTL-26482 SERIES 1 AND 2, BAYONET COUPLING This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall

2、consist of this specification sheet and MIL-DTL-26482. FIGURE 1. Protective cover, plug, all classes. AMSC N/A FSC 5935 Reactivated after 25 July 2012 and may be used for new and existing designs and acquisitions. INCH-POUND MS3180G 25 July 2012 SUPERSEDING MS3180F 8 July 1980 Provided by IHSNot for

3、 ResaleNo reproduction or networking permitted without license from IHS-,-,-MS3180G 2 Shell size A dia +.001 -.005 (+0.03 - 0.13) B dia bay pin +.006 -.002 (+0.15 - 0.05) C dia over bay pins +.000 -.016 (+0.00 - 0.41) D dia +.005 -.001 (+0.13 - 0.03) F dia max overall H std chain/ rope length +.500

4、-.250 (+12.70 - 6.35) 8 .473 (12.01) .078 (1.98) .563 (14.30) .362 (9.19) .719 (18.26) 3.000 (76.20) 10 .590 (14.99) .680 (17.27) .490 (12.45) .844 (21.44) 12 .750 (19.05) .859 (21.82) .607 (15.42) 1.000 (25.40) 3.500 (88.90) 14 .875 (22.22) .984 (24.99) .732 (18.59) 1.125 (28.58) 16 1.000 (25.40) 1

5、.108 (28.14) .857 (21.77) 1.250 (31.75) 18 1.125 (28.58) 1.233 (31.32) .962 (24.43) 1.375 (34.92) 20 1.250 (31.75) 1.358 (34.49) 1.087 (27.61) 1.500 (38.10) 4.000 (101.60 22 1.375 (34.92) 1.483 (37.67) 1.212 (30.78) 1.625 (41.28) 24 1.500 (38.10) .125 (3.18) 1.610 (40.89) 1.337 (33.96) 1.750 (44.45)

6、 Inches mm .005 0.13 .010 0.25 .015 0.38 .016 0.41 .020 0.51 .031 0.79 FIGURE 1. Protective cover, plug, all classes Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS3180G 3 Shell size J disk (gasket) loc. +.010 -.020 (+0.25 - 0.51) L max

7、 length M shldr loc. +.031 -.000 (+0.25 - 0.00) Q dia over kwys +.005 -.006 (+0.13 - 0.15) W bay pin loc. X max length overall 8 .328 (8.33) .562 (14.27) .368 (9.35) .412 (10.46) .100 (2.54) .781 (19.84) 10 .540 (13.72) 12 .689 (17.50) 14 .814 (20.68) 16 .939 (23.85) 18 1.039 (26.39) 20 .390 (9.91)

8、.625 (15.88) .430 (10.92) 1.164 (29.57) .844 (21.44) 22 1.289 (32.74) 24 .658 (16.71) .463 (11.76) 1.414 (35.92) .109 (2.77) .875 (22.22) NOTES: 1. Dimensions are in inches. 2. Metric equivalents (in parentheses) are given for information only. 3 True position (TP) tolerances specified are in accord

9、ance with ASME Y14.5. 4. Intermateability dimensions shall be in accordance with MIL-DTL-26482. 5. Values applied to “W” dimension are true position. FIGURE 1. Protective cover, plug, all classes Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS

10、-,-,-MS3180G 4 REQUIREMENTS: Dimensions and configuration: See figure 1. The chain or rope shall rotate freely on the fastener. Qualification and requalification requirements shall be in accordance with MIL-DTL-26482, series 1 and 2 connectors. Materials: a. Cover - aluminum alloy. b. Cover, bayonet

11、 pins - stainless steel, passivated. c. Chain - stainless steel, passivated in accordance with RR-C-271, type II, class 3. d. Disk (gasket) - silicone elastomer. e. Fasteners - stainless steel, passivated. f. Rope - 7 strand stainless steel, passivated. Finish Designators (class E is superseded by c

12、lass L): A series 2, hard anodic, non-conductive, black, non-reflective, in accordance with MIL-A-8625, type III, .0008 inch (0.020 mm) minimum thickness. L - series 2, electroless nickel, conductive, in accordance with MIL-DTL-26482. D - series 1 and 2, pure electrodeposited aluminum, conductive, n

13、on-reflective, in accordance with MIL-DTL-26482. T - series 1 and 2, nickel fluorocarbon polymer, conductive, non-reflective, in accordance with MIL-DTL-26482. W - series 1 and 2, cadmium, conductive (500 hr dynamic salt spray in accordance with MIL-DTL-26482; olive drab). K - series 1 and 2, zinc-n

14、ickel, conductive, black, nonreflective, in accordance with MIL-DTL-26482. QUALIFICATION: Qualification and requalification requirements shall be in accordance with MIL-DTL-26482, series 1 and 2 connectors. Connector mating: This protective cover mates with all MIL-DTL-26482, series 1 and 2 connecto

15、r plugs. Intermateability dimensions shall be in accordance with MIL-DTL-26482. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS3180G 5 Part or Identifying Number (PIN) example: MS3180 - 12 C A L MS number Shell size Attachment option C with chain

16、R with rope Finish Length (omit for standard) L - Chain or rope with a length of 5.000 +.500/-.250 inches (127 +12.7/-6.35 mm) in lieu of standard (STD) length. For standard length, leave blank (the standard length is the default length). Changes from previous issue. Marginal notations are not used

17、in this revision to identify changes with respect to the previous issue due to the extent of the changes. Referenced documents. In addition to MIL-DTL-26482, this document references the following: ASME Y14.5 MIL-A-8625 RR-C-271 CONCLUDING MATERIAL Custodians: Preparing activity: Army CR DLA CC Navy

18、 AS Air Force 85 (Project 5935-2011-025) DLA CC Review activities: Army AV, CR4 Navy EC, SH Air Force 99 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-