DLA MS17344 REV G-2013 CONNECTOR PLUG ELECTRICAL STRAIGHT.pdf

1、 DETAIL SPECIFICATION SHEET CONNECTOR, PLUG, ELECTRICAL, STRAIGHT This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-DTL-22992. FIGURE 1. Di

2、mensions and configuration. AMSC N/A FSC 5935 MS17344G 16 January 2013 SUPERSEDING MS17344F 26 October 2005 INCH-POUND Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS17344G 2 FIGURE 1. Dimensions and configuration - Continued. Provided by IHSNot f

3、or ResaleNo reproduction or networking permitted without license from IHS-,-,-MS17344G 3 Shell size A Thread (plated) class 2B E max L + .011 - .010 M .031 12 0.8750-0.1P-0.2L-DS .100 .738 .529 14 1.0000-0.1P-0.2L-DS 16 1.1250-0.1P-0.2L-DS .150 18 1.2500-0.1P-0.2L-DS .275 20 1.3750-0.1P-0.2L-DS 22 1

4、.5000-0.1P-0.2L-DS 24 1.7500-0.1P-0.2L-DS .800 28 2.0000-0.1P-0.2L-DS 32 2.2500-0.1P-0.2L-DS .875 36 2.5000-0.1P-0.2L-DS .300 40 2.7500-0.1P-0.2L-DS .100 1.041 .717 44 3.0000-0.1P-0.2L-DS .109 Shell size N + .010 - .001 P + .010 - .005 Q max QQ max R dia max 12 .985 .627 .477 - 1.156 14 1.109 .752 1

5、.027 1.281 16 1.235 .877 1.469 18 1.359 1.002 1.563 20 1.485 1.128 1.688 22 1.609 1.252 1.844 24 1.859 1.453 .967 2.094 28 2.109 1.672 2.344 32 2.359 1.922 .342 .892 2.594 36 2.609 2.141 2.844 40 2.922 2.391 3.156 44 3.172 2.672 NA NA 3.406 FIGURE 1. Dimensions and configuration - Continued. Provide

6、d by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS17344G 4 Shell size V Thread (plated) class 2A LH EE dia + .001 - .007 XX dia + .010 - .006 AAA BBB 12 .7500-20 UNEF .672 .647 .115 +.001, -.007 .047 +.001, -.007 14 .8750-20 UNEF .797 .674 16 1.0000-20 UNEF

7、 .922 .897 .172 +.001, -.010 .078 +.001, -.010 18 1.1250-18 UNEF 1.040 .929 20 1.2500-18 UNEF 1.164 1.052 22 1.3750-18 UNEF 1.289 1.177 24 1.6250-18 UNEF 1.539 1.302 .250 +.001, -.010 .125 +.001, -.010 28 1.8750-16 UN 1.780 1.522 32 2.0625-16 UN 1.967 1.772 36 2.3125-16 UN 2.217 1.982 40 2.6250-16 U

8、N 2.530 2.232 44 2.8750-16 UN 2.780 2.522 FIGURE 1. Dimensions and configuration - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS17344G 5 Shell size CCC DDD EEE pin insert location .030 FFF socket insert location .030 GGG max 12 .0035

9、.655 .593 .084 .793 .898 14 16 .007 18 20 22 24 28 32 .677 .610 36 .701 .634 40 .679 .618 44 .049 .774 1.062 FIGURE 1. Dimensions and configuration - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS17344G 6 Inches mm Inches mm Inches mm

10、Inches mm Inches mm .001 .003 .0035 .005 .006 .007 .010 .011 .016 .019 .020 .030 .031 .047 .049 .062 .078 .084 .100 .109 .115 .125 .141 .150 .172 .250 .275 0.03 0.08 0.09 0.13 0.15 0.18 0.25 0.28 0.41 0.48 0.51 0.76 0.79 1.19 1.24 1.57 1.98 2.13 2.54 2.77 2.92 3.18 3.58 3.81 4.37 6.35 6.99 .300 .342

11、 .417 .477 .529 .554 .593 .610 .618 .627 .655 .672 .674 .677 .679 .701 .717 .738 .750 .752 .761 .771 .774 .793 .797 .800 .804 7.62 8.69 10.59 12.12 13.44 14.07 15.06 15.49 15.70 15.93 16.64 17.07 17.12 17.20 17.25 17.81 18.21 18.75 19.05 19.10 19.33 19.58 19.66 20.14 20.24 20.32 20.42 .875 .877 .892

12、 .898 .922 .929 .967 .985 1.000 1.002 1.027 1.040 1.041 1.052 1.062 1.109 1.125 1.128 1.156 1.164 1.177 1.235 1.250 1.252 1.281 1.289 22.22 22.28 22.66 22.81 23.42 23.60 24.56 25.02 25.40 25.45 26.09 26.42 26.44 26.72 26.97 28.17 28.60 28.65 29.36 29.57 29.90 31.37 31.75 31.80 31.54 32.74 1.302 1.35

13、9 1.375 1.453 1.469 1.485 1.500 1.522 1.539 1.563 1.609 1.625 1.672 1.688 1.750 1.772 1.780 1.844 1.859 1.8750 1.9225 1.967 1.982 2.000 2.0625 2.096 2.109 33.07 34.52 34.93 33.91 37.31 37.72 38.10 38.66 39.09 39.70 40.87 41.28 42.47 42.88 44.46 45.01 45.21 46.84 48.22 47.625 48.832 49.96 50.34 50.80

14、 52.40 53.24 53.57 2.141 2.217 2.232 2.250 2.3125 2.344 2.359 2.391 2.500 2.522 2.530 2.594 2.625 2.629 2.672 2.750 2.844 2.875 2.922 3.000 3.156 3.172 3.406 54.38 56.31 56.70 57.15 58.74 59.54 59.92 60.73 63.50 34.06 64.26 65.89 66.70 66.78 67.87 69.85 72.24 73.04 74.22 76.20 80.16 80.57 86.51 NOTE

15、S: 1. All dimensions are in inches. 2. Unless otherwise specified tolerances are .016 inch (0.41 mm). 3. Metric equivalents are given for information only. 4. Maximum termination of grommet extension for sizes 12 and 16 contacts for class J. 5. Maximum termination of grommet extension for sizes 0, 4

16、, and 8 contacts for class J. 6. Dimensions shall be maintained when inserts are pressed firmly against indicated shoulder. 7. Dimensions shall be 1.210 (30.73 mm) maximum to .920 (23.37 mm) minimum for size 0 contacts only. 8. Front and rear washers for sizes 32 and 36 only. Rear washers for sizes

17、40 and 44 only. FIGURE 1. Dimensions and configuration - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS17344G 7 REQUIREMENTS: Design and construction: See figure 1. Mates with receptacles shown on MS17343, MS17345 through MS17348, MS18

18、062 and covers shown on MS17350. Class shall be designated by the letter C (pressurized), J (pressurized with grommet) or R (environmental resisting). For shell size, insert arrangement, alternate position, contact size, spacing and service rating, see MIL-STD-1651. Shell finish: See MIL-DTL-22992.

19、Part or Identifying Number (PIN) example: MS17344 R 20 C 27 P W MS number Class Shell size Finish Insert arrangement Contact style Alternate position Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent

20、 of the changes. Referenced documents. In addition to MIL-DTL-22992, this document references the following: MS17343 MS17345 MS17346 MS17347 MS17348 MS17350 MS18062 MIL-STD-1651 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS17344G 8 CONCLUDING MA

21、TERIAL Custodians: Preparing activity: Army CR DLA CC Navy EC Air Force 85 DLA CC Review activities: (Project 59352012-180) Army AR, MI Navy AS, CG, MC, OS, SH, YD Air Force 19, 99 NASA NA NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-