DLA MS17347 REV F-2013 CONNECTOR RECEPTACLE ELECTRICAL JAM NUT.pdf

1、 MS17347F 16 January 2013 SUPERSEDING MS17347E 20 December 2002 DETAIL SPECIFICATION SHEET CONNECTOR, RECEPTACLE, ELECTRICAL, JAM NUT This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall

2、 consist of this specification sheet and MIL-DTL-22992. FIGURE 1. Dimensions and configuration. AMSC N/A FSC 5935 INCH-POUND Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS17347F 2 FIGURE 1. Dimensions and configuration Continued. Provided by IHSN

3、ot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS17347F 3 FIGURE 1. Dimensions and configuration Continued. Shell size A Thread (plated) class 2A D dia + .005 - .010 F hex + .017 - .016 H Panel thickness min max 12 0.8750-0.1P-0.2L-DS .567 1.250 .094 .188 14 1.0000

4、-0 1P-0.2L-DS .692 1.312 .094 .188 16 1.1250-0 1P-0.2L-DS .817 1.500 .094 .188 18 1.2500-0.1P-0.2L-DS .942 1.562 .094 .203 20 1.3750-0.1P-0.2L-DS 1.068 1.750 .094 .203 22 1.5000-0.1P-0.2L-DS 1.192 1.875 .094 .203 24 1.7500-0.1P-0.2L-DS 1.317 2.125 .094 .265 28 2.0000-0.1P-0.2L-DS 1.536 2.375 .094 .2

5、77 32 2.2500-0.1P-0.2L-DS 1.786 2.625 .094 .215 36 2.5000-0.1P-0.2L-DS 2.005 2.875 .094 .215 40 2.7500-0.1P-0.2L-DS 2.255 3.125 .094 .215 44 3.0000-0.1P-0.2L-DS 2.545 3.375 .094 .215 Shell size M .010 N + .021 - .020 Q max QQ max 12 1.141 .641 .737 - 14 1.141 .641 .737 1.287 16 1.141 .703 .675 1.225

6、 18 1.156 .703 .660 1.210 20 1.156 .703 .660 1.210 22 1.156 .703 .660 1.210 24 1.219 .703 .597 1.147 28 1.231 .785 .503 1.053 32 1.231 .785 .503 1.053 36 1.231 .785 .503 1.053 40 1.231 .972 .503 1.053 44 1.231 .972 NA NA Provided by IHSNot for ResaleNo reproduction or networking permitted without li

7、cense from IHS-,-,-MS17347F 4 Shell size S V Thread (plated) class 2A-LH W + .017 - .000 DD EE dia + .001 - .007 12 1.375 .7500-20 UNEF .188 .516 .672 14 1.500 .8750-20 UNEF .188 .516 .797 16 1.750 1.0000-20 UNEF .188 .516 .922 18 1.875 1.1250-18 NEF .188 .516 1.040 20 2.000 1.2500-18 NEF .188 .516

8、1.164 22 2.125 1.3750-18 NEF .188 .516 1.289 24 2.375 1.6250-18 NEF .188 .516 1.539 28 2.625 1.8750-16 UN .250 .516 1.780 32 2.875 2.0625-16 N .250 .516 1.967 36 3.125 2.3125-16 N .250 .516 2.217 40 3.406 2.6250-16 UN .250 .703 2.530 44 3.656 2.8750-16 UN .250 .703 2.780 Shell size RR Thread (plated

9、) class 2A-RH Packing preformed (see SAE-AS29513) DDD Socket insert location .030 EEE Pin insert location .030 12 1.000-20 UNEF SAE-AS29513-24 .020 .729 14 1.1250-18 NEF SAE-AS29513-26 .020 .729 16 1.2500-18 NEF SAE-AS29513-127 .020 .729 18 1.3750-18 NEF SAE-AS29513-129 .020 .729 20 1.5000-18 NEF SA

10、E-AS29513-131 .020 .729 22 1.6250-18 NEF SAE-AS29513-133 .020 .729 24 1.8750-16 UN SAE-AS29513-137 .020 .729 28 2.1250-16 UN SAE-AS29513-141 .020 .729 32 2.3750-16 UN SAE-AS29513-145 .020 .729 36 2.6250-16 UN SAE-AS29513-149 .020 .729 40 2.8750-16 UN SAE-AS29513-234 .020 .729 44 3.1250-16 UN SAE-AS2

11、9513-136 .039 .764 FIGURE 1. Dimensions and configuration Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS17347F 5 Shell size GG dia PP + .011 - .010 YY dia + .010 - .006 Z max (see requirements) Z min (contact size 0 only) 12 1.562 .486

12、 .647 .523 Not applicable 14 1.750 .530 .772 .523 16 2.000 .623 .897 .523 18 2.125 .663 1.022 .508 20 2.250 .707 1.148 .508 .582 22 2.500 .751 1.272 .508 24 2.750 .840 1.473 .455 .519 28 3.000 .928 1.692 .433 .507 32 3.250 1.017 1.942 .433 36 3.500 1.104 2.161 .433 40 3.750 1.213 2.411 .433 44 4.000

13、 1.299 2.692 .656 Shell size RR Thread (plated) class 2A-RH AAA BBB CCC 12 1.000-20 UNEF .226 +.007 / - .001 .063 + .007 / - .001 .0035 14 1.1250-18 NEF .126 + .007 / - .001 .063 + .007 / - .001 .0035 16 1.2500-18 NEF .182 + .010 / - .001 .108 + .010 / - .001 .007 18 1.3750-18 NEF .182 + .010 / - .0

14、01 .108 + .010 / - .001 .007 20 1.5000-18 NEF .182 + .010 / - .001 .108 + .010 / - .001 .007 22 1.6250-18 NEF .182 + .010 / - .001 .108 + .010 / - .001 .007 24 1.8750-16 UN .260 + .010 / - .001 .155 + .010 / - .001 .007 28 2.1250-16 UN .260 + .010 / - .001 .155 + .010 / - .001 .007 32 2.3750-16 UN .

15、260 + .010 / - .001 .155 + .010 / - .001 .007 36 2.6250-16 UN .260 + .010 / - .001 .155 + .010 / - .001 .007 40 2.8750-16 UN .260 + .010 / - .001 .155 + .010 / - .001 .007 44 3.1250-16 UN .260 + .010 / - .001 .155 + .010 / - .001 .007 FIGURE 1. Dimensions and configuration Continued. Provided by IHS

16、Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS17347F 6 Inches mm Inches mm Inches mm Inches mm Inches mm .001 0.03 .445 11.30 .772 19.61 1.287 32.69 2.500 63.50 .0035 0.089 .486 12.34 .785 19.94 1.289 32.74 2.530 64.26 .005 0.13 .503 12.78 .797 20.24 1.299 32.9

17、9 2.545 64.64 .006 0.15 .507 12.88 .817 20.75 1.312 33.32 2.625 66.68 .007 0.18 .508 12.90 .840 21.34 1.317 33.45 2.692 68.38 .010 0.25 .516 13.11 .8750 22.225 1.375 34.93 2.750 69.85 .011 0.28 .519 13.18 .897 22.78 1.473 37.41 2.780 70.61 .016 0.40 .523 13.28 .922 23.42 1.500 38.10 2.875 73.03 .017

18、 0.43 .530 13.46 .928 23.57 1.536 39.01 3.000 76.20 .020 0.51 .567 14.40 .942 23.93 1.539 39.09 3.125 79.38 .021 0.53 .582 14.78 .972 24.68 1.562 39.67 3.250 82.55 .025 0.64 .597 15.16 1.000 25.40 1.6250 41.275 3.375 85.72 .030 0.76 .609 15.47 1.017 25.83 1.692 42.98 3.406 86.51 .031 0.79 .622 15.80

19、 1.022 25.96 1.750 44.45 3.500 88.90 .039 0.99 .623 15.82 1.040 26.41 1.780 45.21 3.656 92.86 .045 1.14 .625 15.88 1.053 26.74 1.786 45.36 3.750 95.25 .062 1.57 .641 16.29 1.168 29.67 1.875 47.63 4.000 101.60 .063 1.60 .647 16.43 1.104 28.04 1.9420 49.33 .094 2.39 .656 16.66 1.1250 28.575 1.967 49.9

20、6 .108 2.74 .660 16.76 1.141 28.98 2.000 50.800 .126 3.20 .663 16.84 1.147 29.13 2.005 50.927 .141 3.58 .672 17.06 1.148 29.16 2.0625 52.388 .155 3.94 .675 17.15 1.156 29.36 2.125 53.98 .182 4.62 .688 17.48 1.164 29.57 2.161 54.89 .188 4.78 .692 17.58 1.192 30.28 2.217 56.31 .203 5.16 .703 17.86 1.2

21、10 30.73 2.500 57.150 .215 5.46 .707 17.96 1.213 30.81 2.250 57.15 .250 6.35 .729 18.52 1.219 31.96 2.255 57.28 .260 6.60 .737 18.72 1.225 31.12 2.3125 58.737 .265 6.73 .7500 19.050 1.231 31.27 2.3750 60.325 .277 7.04 .751 19.08 1.250 31.75 2.375 60.33 .433 11.00 .764 19.41 1.272 32.31 2.411 61.24 N

22、OTES: 1. All dimensions are in inches. Metric equivalents are given for information only. 2. Unless otherwise specified tolerances are .016 (0.41mm). 3. Dimensions shall be maintained when inserts are pressed firmly against indicated shoulder. 4. The part number shall include the class, shell size,

23、finish, insert arrangement, contact style (P or S) and alternate position as shown in the example below. 5. For protective cover, see MS17349. 6. Maximum termination of grommet extension for sizes 12 and 16 contacts for class J. 7. Maximum termination of grommet extension for sizes 0, 4, and 8 conta

24、cts for class J. FIGURE 1. Dimensions and configuration Continued. . Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS17347F 7 REQUIREMENTS: Design and construction: See figure 1. Dimension are in inches. Metric equivalents are given for information

25、 only. Unless otherwise specified, tolerance is .016 (0.41 mm). Mates with plugs shown on MS17344. For size 0 contacts only: Increase Z dimension by .312 (7.92 mm) for shell sizes 12 through 40, and increase Z dimension by .062 (1.57 mm) for shell size 44. For shell size, insert arrangement, alterna

26、te position, contact size, spacing and service rating, see MIL-STD-1651. Shell and jam nut finish: See MIL-DTL-22992. Class shall be designated by the letter C (pressurized), J (pressurized with grommet) or R (environmental resisting). Part or Identifying Number (PIN) example: MS17347 J 20 C 27 P W

27、MS number Class Shell size Finish Insert arrangement Contact style Alternate position Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. Referenced documents. In addition to MIL-DTL-22

28、992, this document references the following: MS17344 MS17349 MIL-STD-1651 SAE-AS29513 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS17347F 8 CONCLUDING MATERIAL Custodians: Preparing activity: Army CR DLA CC Navy EC Air Force 85 DLA CC Review act

29、ivities: Army AR, MI (Project 59352012-184) Navy AS, CG, MC, OS, YD Air Force 19 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-