DLA MS27230 REV B-2007 FLANGE ASSEMBLY 45 ADAPTER HOSE TO TUBE REUSABLE FUEL AND OIL LINES《可重复使用的45度法兰软管组件适配器》.pdf

1、 INCH-POUNDMS27230B 14 May 2007 SUPERSEDING MS27230A 22 September 2000 DETAIL SPECIFICATION SHEET FLANGE ASSEMBLY 45, ADAPTER, HOSE TO TUBE, REUSABLE, FUEL AND OIL LINES This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquirin

2、g the product described herein shall consist of this specification sheet and MIL-DTL-5070. FIGURE 1. 45 flange assembly dimensions and configuration. AMSC N/A FSC 4730 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS27230B 2 MS27230 dash number Fla

3、nge PIN MS20756 (see note 3) Nipple assembly PIN MS27229 Socket PIN MS24590 -8AA -8 -8 -8 -10AA -10 -10 -10-12AA -12 -12 -12 MS24591-16AA -16 -16 -16 -20AA -20 -20 -20-24AA -24 -24 -24 -32AA -32 -32 -32-40AA -40 -40 -40 -48AA -48 -48 -48NOTES: 1. Dimensions are in inches. 2. Metric equivalents are f

4、or information only. 3. Part or Identifying Number (PIN). FIGURE 1. 45 flange assembly dimensions and configuration - Continued. REQUIREMENTS: Dimensions and configurations: The design, construction, and physical dimensions shall be in accordance with MIL-DTL-5070 and figure 1 in case of conflict be

5、tween this drawing and MIL-DTL-5070, this drawing shall govern. Material: Aluminum shall be accordance with MIL-DTL-5070. Intended use. This assembly is designed for use only with hose conforming to MIL-DTL-8794. This assembly is intended for use only in fuel and oil lines. PIN example: MS 27230 -8

6、AA Material/finish code, see table I Dash number on figure 1 Specification number TABLE I. Code for material and finish. Code Dash size Material/finish AA -8 through-48 Aluminum anodic coating MS prefix Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,

7、-MS27230B 3 Identification of product. The PIN and the manufacturers Commercial and Government Entity (CAGE) Code or trademark shall be marked on a removable tag securely attached to the assembly. Changes from previous issue. Marginal notations are not used in this revision to identify changes with

8、respect to the previous issue, due to the extent of the changes. Referenced documents: In addition to MIL-DTL-5070, this document references the following: MIL-DTL-8794 MS20756 MS24590 MS24591 MS27229 CONCLUDING MATERIAL Custodians: Preparing activity: Army - AT DLA - CC Navy - AS Air Force - 99 (Pr

9、oject 4730-2005-049) DLA - CC Review activities: Army - AV Navy - MC, SA Air Force - 11, 71 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-