DLA MS27334 REV E-2010 CONNECTORS RECEPTACLE ELECTRICAL WALL MOUNTING FLANGE SOLDER TYPE BAYONET COUPLING CLASSES P AND T SERIES II.pdf

1、 DETAIL SPECIFICATION SHEET CONNECTORS, RECEPTACLE, ELECTRICAL, WALL MOUNTING FLANGE, SOLDER TYPE, BAYONET COUPLING, CLASSES P AND T, SERIES II This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described he

2、rein shall consist of this specification sheet and MIL-DTL-27599. FIGURE 1. Receptacle, wall mount flange. AMSC N/A FSC 5935 INCH - POUNDMS27334E 31 August 2010 SUPERSEDING MS27334D 20 May 2005 Inactive for new design after 7 December 1998. Provided by IHSNot for ResaleNo reproduction or networking

3、permitted without license from IHS-,-,-MS27334E 2 FIGURE 1. Receptacle, wall mount flange - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS27334E 3 FIGURE 1. Receptacle, wall mount flange - Continued. Provided by IHSNot for ResaleNo rep

4、roduction or networking permitted without license from IHS-,-,-MS27334E 4 FIGURE 1. Receptacle, wall mount flange - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS27334E 5 Inches mm Inches mm Inches mm Inches mm 0.001 0.0254 0.012 0.305

5、 0.058 1.473 0.139 3.531 0.004 0.1016 0.015 0.381 0.063 1.600 0.188 4.775 0.005 0.127 0.02 0.508 0.078 1.981 0.223 5.664 0.010 0.254 0.039 0.991 0.116 2.947 0.239 6.071 0.011 0.279 0.053 1.346 0.126 3.200 0.322 8.179 NOTES: 1. Insert front surface shall be flat within .005 T.I.R. 2. Dimensions are i

6、n inches. Metric equivalents are given for information only. 3. The point at which a gauge pin having the same basic diameter as the mating contact and a square face, touches socket contact spring. 4. Normal keyway position. For other keyway positions, see MIL-DTL-27599. 5. Diameters A and D shall b

7、e concentric within .015 T.I.R. 6. Diameter A with respect to diameter B, and diameter D with respect to diameter N, shall be concentric at MMC. 7. Diameters D and I shall be concentric within .005 T.I.R. at MMC. 8. The gauge features for GG shall be CC smaller than their MMC size at basic location.

8、 9. The gauge features for GG shall be .010 smaller than their MMC size at basic location. FIGURE 1. Receptacle, wall mount flange - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS27334E 6 TABLE I. Dimensions. 1/ 2/ Shell size A dia + .

9、001 - .005 B dia + .000 - .016 over projections C dia + .006 - .002 D dia + .005 - .001 I dia .005 N dia + .005 - .006 8 .473 (12.01) .563 (14.30) .078 (1.98) .362 (9.19) .296 (7.52) .412 (10.46) 10 .590 (14.98) .680 (17.27) .490 (12.44) .413 (10.49) .540 (13.71) 12 .750 (19.05) .859 (21.82) .607 (1

10、5.42) .527 (13.38) .689 (17.50) 14 .875 (22.22) .984 (25.00) .732 (18.59) .652 (16.56) .814 (20.67) 16 1.000 (25.40) 1.108 (28.14) .857 (21.77) .777 (19.73) .939 (23.85) 18 1.125 (28.57) 1.233 (31.32) .962 (24.43) .866 (22.00) 1.039 (26.39) 20 1.250 (31.75) 1.358 (34.49) .125 (3.175) 1.087 (27.60) .

11、991 (25.17) 1.164 (29.56) 22 1.375 (34.92) 1.483 (37.67) 1.212 (30.78) 1.116 (28.34) 1.289 (32.74) 24 1.500 (38.10) 1.610 (40.89) 1.337 33.96) 1.241 (31.52) 1.414 (35.91) See notes at end of table. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS27

12、334E 7 TABLE I. Dimensions - Continued. 1/ 2/ Shell size Q max R BSC S max T + .010 - .005 CC 8 1.078 (27.38) .297 (7.54) .828 (21.03) .120 (3.05) .004 (.102) 10 1.266 (32.15) .3595 (9.1313) .954 (24.23) .010 (.254) 12 1.391 (35.33) .406 10.31) 1.047 (26.59) 14 1.516 (38.50) .453 (11.50) 1.141 (28.9

13、8) 16 1.641 (41.68) .4845 (12.30) 1.234 (31.34) 18 1.766 (44.85) .531 (13.48) 1.328 (33.73) 20 1.891 (48.03) .578 (14.68) 1.453 (36.90) 22 2.016 (51.20) .625 (15.87) 1.578 (40.08) 24 2.204 (55.98) .6875 (17.46) 1.703 (43.25) .147 (3.73) 1/ Dimensions are in inches. 2/ Metric equivalents are given fo

14、r information only. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS27334E 8 FIGURE 2. Receptacle, rear accessory areas. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS27334E 9 TABLE II. Dimensio

15、ns (rear accessory) - Continued. 1/ 2/ Shell size LT max VV thread UNEF-2A MOD (plated) LP max XP min dia YP max dia Size Major dia MOD 8 .250 (6.35) .4375 - 28 .421 - .417 (10.69 10.60) .453 (11.50) .317 (8.05) .531 (13.48) 10 .5625 - 24 .542 - .538 (13.76 13.66) .434 (11.02) .641 (16.28) 12 .6875

16、- 24 .667 - .663 (16.94 16.84) .548 (13.92) .766 (19.45) 14 .8125 - 20 .791 - .787 (20.09 19.98) .673 (17.09) .891 (22.63) 16 .9375 - 20 .916 - .912 (23.26 23.16) .798 (20.27) 1.016 (25.80) 18 1.0625 - 18 1.034 - 1.030 (26.26 26.16) .899 (22.83) 1.125 (28.57) 20 1.1875 - 18 1.158 - 1.154 (29.41 29.3

17、1) 1.024 (26.01) 1.250 (31.75) 22 1.3125 - 18 1.283 - 1.279 (32.58 32.48) 1.149 (29.18) 1.375 (34.92) 24 .328 (8.33) 1.4375 - 18 1.408 - 1.404 (35.76 35.66) .531 (13.48) 1.274 (32.36) 1.500 (38.10) 1/ Dimensions are in inches. 2/ Metric equivalents are given for information only. REQUIREMENTS Dimens

18、ions and configurations: See figures 1 and 2 and tables I and II. This connector mates with MS27336. Insert arrangement shall be in accordance with MIL-STD-1560. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS27334E 10 Part or Identifying Number (

19、PIN) example: MS27334 T 24 A 61 P A MS number Class Shell size Finish (color) Insert arrangement Style Polarizing position (No letter is required for normal position) Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue

20、due to the extent of the changes. Reference documents. In addition to MIL-DTL-27599, this document references the following: MIL-STD-1560 MS27336 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS27334E 11 CONCLUDING MATERIAL Custodians: Preparing ac

21、tivity: Air Force - 85 DLA - CC DLA - CC Review activities: Air Force - 99 (Project 5935-2010-100) DLA - IS NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-