DLA MS27480 REV H-2012 CONNECTORS PLUG ELECTRICAL STRAIGHT CRIMP TYPE BAYONET COUPLING SERIES II [Use DLA MS27473 REV N DLA MS27473 REV M NOTICE 1 DLA MS27473 REV M DLA MS27473 REV.pdf

1、 DETAIL SPECIFICATION SHEET CONNECTORS, PLUG, ELECTRICAL, STRAIGHT, CRIMP TYPE, BAYONET COUPLING, SERIES II This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specifica

2、tion sheet and MIL-DTL-38999. FIGURE 1. Plug, classes E and T. AMSC N/A FSC 5935 MS27480H 27 June 2012 SUPERSEDING MS27480G 12 July 2002 INCH-POUND Inactive for new design after 27 June 2012. For new design, use MS27473. Provided by IHSNot for ResaleNo reproduction or networking permitted without li

3、cense from IHS-,-,-MS27480H 2 FIGURE 1. Plug, classes E and T Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS27480H 3 Shell size A dia +.005 -.001 B .020 C +.015 -.001 D dia +.001 -.005 E dia min F dia +.000 -.006 K max REF N dia +.010

4、-.006 8 .481 .096 .090 .357 .306 .630 .155 .576 10 .602 .485 .423 .752 .697 12 .761 .597 .537 .925 .871 14 .885 .722 .662 1.050 .995 16 1.010 .847 .787 1.172 1.120 18 1.136 .947 .876 1.304 1.245 20 1.260 .123 .137 1.072 1.001 1.435 .109 1.370 22 1.385 1.197 1.126 1.560 1.495 24 1.510 1.322 1.251 1.6

5、88 1.624 Shell size Q dia max R +.005 -.006 dia S +.001 -.010 dia W .015 For insert arrangement, see MS drawing I dia max 8 .750 .316 .402 .547 27343, 27516 .290 10 .859 .436 .530 27344, 27517 .418 12 1.031 .549 .679 27345, 27518 .532 14 1.156 .675 .804 27346, 27519 .657 16 1.281 .799 .929 27347, 27

6、520 .782 18 1.406 .893 1.029 27348, 27521 .871 20 1.531 1.018 1.154 .524 27349, 27522 .996 22 1.641 1.143 1.279 27350, 27523 1.121 24 1.766 1.268 1.404 .575 27351, 27524 1.246 FIGURE 1. Plug, classes E and T Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without lice

7、nse from IHS-,-,-MS27480H 4 NOTES: 1. Insert front surface shall be flat within .005 T.I.R. 2. Diameter D with respect to diameter S shall be concentric at MMC. 3. Diameters A and N shall be concentric within .008 T.I.R. 4. Dimensions are in inches. 5. Normal key position. For other key positions, s

8、ee MIL-DTL-38999. 6. The point at which a gage pin, having the same basic diameter as the mating contact and a square face, touches socket contact spring. 7. Holes shall be provided for visual inspection of lock when mated with receptacle. FIGURE 1. Plug, classes E and T - Continued. Provided by IHS

9、Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS27480H 5 Shell size G insert projection (class T only) HH dia +.000 -.005 KK dia (DATUM) NN PP dia .003 8 .120 .030 .387 .366 12 .344 10 .515 .487 16 .472 12 .628 .609 20 .586 14 .754 .731 24 .711 16 .879 .853 28 .8

10、36 18 .985 .974 32 .942 20 1.110 1.097 36 1.067 22 1.235 1.218 40 1.192 24 .0900 .050 1.360 1.340 44 1.317 Shell size LE max overall length LT max overall length XE dia max VV thread UNEF-2A MOD (plated) Size Major dia MOD 8 .953 .766 .594 7/16 28 .421 .417 10 .719 9/16 24 .542 .538 12 .844 11/16 24

11、 .667 .663 14 .969 13/16 20 .791 .787 16 1.094 15/16 20 .916 .912 18 1.219 1 1/16 18 1.034 1.030 20 1.344 1 3/16 18 1.158 1.154 22 1.469 1 5/16 18 1.283 1.279 24 .844 1.594 1 7/16 18 1.408 1.404 FIGURE 1. Plug, classes E and T - Continued. Provided by IHSNot for ResaleNo reproduction or networking p

12、ermitted without license from IHS-,-,-MS27480H 6 REQUIREMENTS: Dimensions and configuration: See figure 1. Interface dimensions shall conform to MIL-DTL-38999. Mating connectors: MIL-DTL-38999/10, MS27472, MS27474, MS27475, MS27476, MS27477, MS27478, MS27479, MS27480, MS27481, MS27497, MS27499, MS27

13、504, MS27508 and MS27513. Insert arrangements: See MIL-STD-1560. Part or Identifying Number (PIN) example: MS27480 T 24 C 61 P A MS number Class Shell size Finish Insert arrangement Contact style Polarizing positions No letter is required for normal. Changes from previous issue. Marginal notations a

14、re not used in this revision to identify changes with respect to the previous issue, due to the extent of the changes. Referenced documents. In addition to MIL-DTL-38999, this document references the following: MIL-DTL-38999/10 MIL-STD-1560 MS27472 MS27473 MS27474 MS27475 MS27476 MS27477 MS27478 MS2

15、7479 MS27480 MS27481 MS27497 MS27499 MS27504 MS27508 MS27513 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS27480H 7 CONCLUDING MATERIAL Custodians: Preparing activity: Army CR DLA CC Navy AS Air Force 85 (Project 5935-2012-030) DLA CC Review acti

16、vities: Army AR, MI Navy EC, MC, OS Air Force 19, 99 DLA IS NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-