DLA MS27487 REV F-2012 CONNECTORS ADAPTER ELECTRICAL THREADED KIT STRAIGHT AND 90 DEGREES EMR HARDWARE SERIES I AND II [Use SAE AS85049 32B SAE AS85049 32A-A3 SAE AS85049 32A-A2 SA.pdf

1、MS27487F 6 August 2012 SUPERSEDING MS27487E 12 July 2002 DETAIL SPECIFICATION SHEET CONNECTORS, ADAPTER, ELECTRICAL, THREADED, KIT, STRAIGHT AND 90 DEGREES, EMR HARDWARE, SERIES I AND II This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirem

2、ents for acquiring the product described herein shall consist of this specification sheet and MIL-DTL-38999. FIGURE 1. Adapter. AMSC N/A FSC 5935 INCH-POUND Inactive for new design after 6 August 2012. For new design for 90 degree type adapter only, use SAE-AS85049/32. Provided by IHSNot for ResaleN

3、o reproduction or networking permitted without license from IHS-,-,-MS27487F 2 FIGURE 1. Adapter Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS27487F 3 Shell size series I Shell size series II A dia max B dia max C dia max D dia max LS

4、 max L90max V Thread UNEF class 2B 9 8 .594 (15.09) .359 (9.12) .516 (13.11) .656 (16.66) .844 (21.44) .719 (18.26) .4375-28 11 10 .719 (18.26) .406 (10.31) .641 (16.28) .781 (19.84) .969 (24.61) .766 (19.46) .5625-24 13 12 .844 (21.44) .500 (12.70) .766 (19.46) .938 (23.83) 1.094 (27.79) .859 (21.8

5、2) .6875-24 15 14 .969 (24.61) .578 (14.68) .891 (22.63) 1.062 (26.97) 1.156 (29.36) .938 (23.83) .8125-20 17 16 1.094 (27.79) .641 (16.28) 1.016 (25.81) 1.219 (30.96) 1.219 (30.96) 1.000 (25.40) .9375-20 19 18 1.219 (30.96) .688 (17.48) 1.141 (28.98) 1.344 (34.14) 1.344 (34.14) 1.047 (26.59) 1.0625

6、-18 21 20 1.344 (34.14) .734 (18.64) 1.265 (32.13) 1.469 (37.31) 1.469 (37.31) 1.094 (27.79) 1.1875-18 23 22 1.469 (37.31) .796 (20.22) 1.391 (35.33) 1.594 (40.49) 1.594 (40.49) 1.156 (29.36) 1.3125-18 25 24 1.594 (40.49) .859 (21.82) 1.516 (38.51) 1.719 (43.66) 1.719 (43.66) 1.219 (30.96) 1.4375-18

7、 NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for information only. 3. Material: Copper alloy. Finish shall be tin-lead, solder plated. The use of pure tin is prohibited both internally and externally. Tin content of connectors, their components and solder shall not exceed 97

8、percent, by mass. Tin shall be alloyed with a minimum of 3 percent lead, by mass. 4. Type 1 may be of a two-piece construction. Type 2 may be of a three-piece construction. Individual pieces shall be shipped unassembled. 5. Method of joining components is optional. FIGURE 1. Adapter Continued. Provi

9、ded by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS27487F 4 REQUIREMENTS: Dimensions and configuration: See figure 1. Interface dimensions shall conform to MIL-DTL-38999. Mating connectors: MIL-DTL-38999 series I and series II. Qualification: Examination o

10、f product. Mating and unmating forces. Humidity. Salt spray (corrosion). Altitude immersion. Group A sampling inspection. 100% inspection is not applicable. Sampling inspection shall be in accordance with table I: TABLE I. Group A sampling plan. Lot size Sample size 1 to 13 14 to 150 151 to 280 281

11、to 500 501 to 1,200 1,201 to 3,200 100 percent 13 units 20 units 29 units 34 units 42 units Part or Identifying Number (PIN) example: MS27487 -12 -1 MS number Shell size Adapter geometry -1: Straight adapter -2: 90 elbow adapter Changes from previous issue. Marginal notations are not used in this re

12、vision to identify changes with respect to the previous issue, due to the extent of the changes. Referenced documents. In addition to MIL-DTL-38999, this document references the following: SAE-AS85049/32 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-

13、,-MS27487F 5 CONCLUDING MATERIAL Custodians: Preparing activity: Army - CR DLA - CC Navy - AS Air Force 85 (Project 5935-2012-039) DLA - CC Review activities: Army - AR, MI Navy - EC, MC, OS Air Force - 19, 99 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-