DLA MS27510 REV H-2012 CONNECTORS ELECTRICAL CIRCULAR COVER PROTECTIVE PLUG BAYONET COUPLING SERIES II.pdf

1、 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRICAL, CIRCULAR, COVER, PROTECTIVE, PLUG, BAYONET COUPLING, SERIES II This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this sp

2、ecification sheet and MIL-DTL-38999. FIGURE 1. Cover. AMSC N/A FSC 5935 MS27510H 15 June 2012 SUPERSEDING MS27510G 12 July 2002 INCH-POUND Reactivated after 10 June 2005 and may be used for new and existing designs and acquisitions. Provided by IHSNot for ResaleNo reproduction or networking permitte

3、d without license from IHS-,-,-MS27510H 2 Shell size A dia +.001 -.005 H +.500 / -.250 standard chain length J +.010 -.015 L max M min Q dia max X BSC degree Y BSC degree LL max 8 .473 3.0 .222 .57 .31 .72 82 118 .82 10 .590 .85 72 128 12 .750 3.50 1.00 68 132 14 .875 1.13 66 134 16 1.000 1.25 70 13

4、0 18 1.125 1.38 20 1.250 4.0 1.50 22 1.375 1.63 74 126 24 1.500 1.75 FIGURE 1. Cover Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS27510H 3 Inches mm Inches mm Inches mm Inches mm .001 0.03 .473 12.01 1.00 25.4 1.75 44.4 .005 0.13 .500

5、 12.70 1.125 28.58 3.0 76.2 .010 0.25 .57 14.5 1.13 28.7 3.5 88.9 .015 0.38 .59 15.0 1.25 31.8 4.0 101.6 .047 1.19 .72 18.3 1.375 34.92 5.0 127.0 .063 1.60 .75 19.0 1.38 35.1 6.0 152.4 .167 4.24 .82 20.8 1.50 38.1 7.0 177.8 .222 5.64 .85 21.6 1.63 41.4 .250 6.35 .875 22.22 .31 7.90 NOTES: 1. Dimensi

6、ons are in inches. 2. Metric equivalents are given for information only. 3. Finish: See MIL-DTL-38999. 4. BSC dimensions apply at maximum material condition (MMC). 5. The gauge features for GG shall be .004 inch (0.10 mm) smaller than MMC size at basic location. 6. Not for space born applications. F

7、IGURE 1. Cover Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS27510H 4 REQUIREMENTS: Dimensions and configuration: See figure 1. Interface dimensions shall be in accordance with MIL-DTL-38999. Material: Cap - Impact extruded or machined

8、 aluminum alloy. Disk - Silicone or fluorosilicone elastomer. Chain - Stainless steel, passivated, conforming to RR-C-271, type II, class 3. Fastener - Stainless steel, passivated. Mating connectors: MIL-DTL-38999, series II plugs and MIL-DTL-27599, series II plugs. The protective cover and chain as

9、sembly shall withstand a static tensile load of 35 pounds applied along the B reference line for 5 minutes. Fastener tensile strength: Both axial and longitudinal directions shall be 25 pounds. The load shall be applied to the end of the chain. Qualification: Examination of product. Mating and unmat

10、ing forces. Humidity. Salt spray (corrosion). Fastener tensile strength (see requirement). Altitude immersion. Group A sampling inspection. 100% inspection is not applicable. Sampling inspection shall be in accordance with table I: TABLE I. Group A sampling plan. Lot size Sample size 1 to 13 14 to 1

11、50 151 to 280 281 to 500 501 to 1,200 1,201 to 3,200 100 percent 13 units 20 units 29 units 34 units 42 units Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS27510H 5 Part or Identifying Number (PIN) example: MS27510 A 10 C L MS number Finish Shell

12、 size Style C - Chain A - Without chain Length (Omit for style A and style C with standard chain length) (tolerance: +.500, -.250) L - 5 inch chain in lieu of standard length M - 6 inch chain in lieu of standard length N - 7 inch chain in lieu of standard length Changes from previous issue. Marginal

13、 notations are not used in this revision to identify changes with respect to the previous issue, due to the extent of the changes. Referenced documents. In addition to MIL-DTL-38999, this document references the following: MIL-DTL-27599 RR-C-271 CONCLUDING MATERIAL Custodians: Preparing activity: Ar

14、my CR DLA CC Navy AS Air Force 85 (Project 5935-2012-043) DLA CC Review activities: Army AR, MI Navy EC, MC, OS Air Force 19, 99 DLA IS NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-