DLA MS27614 REV F-2009 CONNECTORS ELECTRICAL RECEPTACLE 揇 HOLE MOUNT FIREWALL SERIES [Use DLA MIL-DTL-83723 G SUPP 1 DLA MIL-DTL-83723 G DLA MIL-DTL-83723F (1) DLA MIL-DTL-83723F S.pdf

1、 INCH-POUND DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRICAL, RECEPTACLE, “D” HOLE MOUNT, FIREWALL SERIES This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specificat

2、ion sheet and MIL-DTL-26500. FIGURE 1. Receptacle dimensions. AMSC N/A FSC 5935 MS27614F 14 August 2009 SUPERSEDING MS27614E 6 February 2004 Inactive for new design, after 14 November 1977. For new design, use MIL-DTL-83723, series III, class K, which is interchangeable. INCH-POUND Provided by IHSNo

3、t for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS27614F 2 FIGURE 1. Receptacle dimensions Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS27614F 3 FIGURE 1. Receptacle dimensions Continued. Provided by I

4、HSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS27614F 4 Inches mm Inches mm .015 0.38 .378 9.60 .025 0.64 .392 9.96 .054 1.37 .413 10.49 .062 1.57 .761 19.33 .093 2.36 .781 19.84 .133 3.38 1.065 27.05 .153 3.89 1.085 27.56 .155 3.94 1.312 33.52 .169 4.29 FIGUR

5、E 1. Receptacle dimensions Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS27614F 5 FIGURE 1. Receptacle dimensions Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS27614F 6 F

6、IGURE 1. Receptacle dimensions Continued. Inches mm .015 0.38 .054 1.37 .091 2.31 .093 2.36 .1350 3.429 .1405 3.568 .155 3.93 .169 4.29 .761 19.33 .781 19.84 1.065 27.05 1.085 27.56 1.312 33.32 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS27614F

7、 7 Shell size (see note 3) A dia .005 (0.13) B dia + .005 (0.13) - .000 (0.00) C dia D UNEF-2A E dia .005 (0.13) 12 .809 (20.55) .700 (17.78) .558 (14.17) .875-20 (22.22) .102 (2.59) 14 .871 (22.12) .769 (19.53) .627 (15.92) .937-18 (23.80) .102 (2.59) 16 .989 (25.12) .896 (22.76) .751 (19.15) 1.062

8、-18 (26.97) .102 (2.59) 18 1.114 (28.30) 1.002 (25.45) .860 (21.84) 1.187-18 (30.15) .102 (2.59) 22 1.364 ()34.64 1.252 (31.80) 1.110 (28.19) 1.437-18 (36.50) .133 (3.38) 24 1.488 (37.80) 1.377 (34.98) 1.235 (31.37) 1.562-18 (31.37) .133 (3.38) 28 1.729 (43.92) 1.627 (41.32) 1.488 (37.80) 1.812-18 (

9、46.02) .133 (3.38) FIGURE 1. Receptacle dimensions Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS27614F 8 Shell size (see note 3) F UNS-2A G -36NS-2A H dia HH .005 (0.13) J dim .005 (0.13) 12 .937-20 (23.80) .7334 (18.628) .801 (20.34)

10、 .829 (21.06) 1.291 (32.79) 14 1.000-20 (25.40) .8032 (20.401) .875 (22.22) .898 (22.81) 1.391 (35.33) 16 1.125-20 (28.58) .9302 (23.627) 1.002 (25.45) 1.025 (26.04) 1.516 (38.51) 18 1.250-20 (31.75) 1.0362 (26.319) 1.108 (28.14) 1.131 (28.73) 1.641 (41.68) 22 1.500-20 (38.10) 1.2862 (32.669) 1.358

11、(34.49) 1.381 (35.08) 1.954 (49.63) 24 1.625-18 (41.28) 1.4111 (35.842) 1.483 (37.67) N/A 2.068 (52.53) 28 1.875-20 (47.62) 1.6611 (42.192) 1.733 (44.02) N/A 2.318 (58.88) FIGURE 1. Receptacle dimensions Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license

12、from IHS-,-,-MS27614F 9 Shell size (see note 3) K max hex KK - .002 (0.05) + .005 (0.13) L max M + .005 (0.13) - .000 (0.00) N dia .005 (0.13) P .005 (0.13) 12 1.125 (28.58) .4555 (11.570) .905 (22.99) .373 (9.47) .927 (23.54) .917 (23.29) 14 1.062 (26.97) .4900 (12.446) .971 (24.66) .408 (10.36) 1.

13、010 (25.65) .980 (24.89) 16 1.187 (30.15) .5535 (14.059) 1.098 (27.89) .471 (11.96) 1.135 (28.83) 1.105 (28.07) 18 1.312 (33.32) .6065 (15.405) 1.220 (30.99) .524 (13.31) 1.260 (32.00) 1.225 (31.12) 22 1.562 (39.67) .7315 (18.580) 1.470 (37.34) .648 (16.46) 1.510 (38.35) 1.475 (37.46) 24 1.892 (48.0

14、6) N/A 1.592 (40.44) .713 (18.11) 1.645 (41.78) 1.600 (40.64) 28 2.142 (54.41) N/A 1.842 (46.79) .838 (21.28) 1.865 (47.37) 1.847 (46.91) FIGURE 1. Receptacle dimensions Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS27614F 10 Shell siz

15、e (see note 3) R max S dia .005 (0.15) T dia .010 (0.25) U .003 (0.08) W dia max X dia .006 0.15 Y dia .010 (0.25) 12 N/A N/A N/A .094 (2.39) 2.045 (51.94) .435 (11.05) .788 (20.02) 14 1.875 (47.17) .382 (9.70) .862 (21.89) .094 (2.39) 2.145 (54.18) .554 (14.07) .862 (21.89) 16 1.875 (47.17) .462 (1

16、1.73) .989 (25.12) .094 (2.39) 2.245 (57.02) .686 (17.42) .989 (25.12) 18 1.875 (47.17) .556 (14.12) 1.095 (27.81) .125 (3.18) 2.345 (59.56) .794 (20.17) 1.095 (27.81) 22 1.875 (47.17) .608 (15.44) 1.345 (34.16) .125 (3.18) 2.575 (65.40) 1.038 (26.36) 1.345 (34.16) 24 N/A N/A N/A .125 (3.18) 2.675 (

17、67.94) 1.162 (29.51) 1.595 (40.51) 28 N/A N/A N/A .125 (3.18) 2.875 (73.02) 1.412 (35.86) 1.845 (46.86) FIGURE 1. Receptacle dimensions Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS27614F 11 Weights of assembly (in pounds) less contac

18、ts and cable support. Size 12 12 14 14 14 14 16 16 18 18 18 Configuration 03 12 04 07 12 15 10 24 08 14 31 Pin .064 .062 .068 .068 .067 .069 .073 .079 .094 .095 .097 mm 1.62 1.57 1.73 1.73 1.70 1.75 1.85 2.01 2.39 2.41 2.46 Socket .067 .064 .071 .070 .070 .071 .079 .081 .099 .100 .101 mm 1.70 1.62 1

19、.80 1.78 1.78 1.80 2.01 2.06 2.51 2.54 2.56 Size 22 22 22 24 24 28 28 22 Configuration 19 12 55 30 43 40 42 12 Pin .129 .130 .130 .140 .142 .203 .206 .130 mm 3.28 3.30 3.30 3.56 3.61 5.16 5.23 3.30 Socket .139 .135 .131 .142 .146 .207 .208 .135 mm 3.53 3.43 3.33 3.61 3.71 5.26 5.28 3.43 NOTES: 1. Di

20、mensions are in inches. 2. Metric equivalents are given for information only. 3. From size 12 and 28 in bayonet series not released. FIGURE 1. Receptacle dimensions Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS27614F 12 REQUIREMENTS D

21、imensions and configurations: See figure 1. Connector mating: This connector mates with MS24266 and MS27615. The contacts shall be crimp type contacts and shall conform to SAE-AS39029 . Contacts are not assembled into the connectors, but are furnished separately in containers. The contacts shall be

22、crimped with a tool conforming to MIL-C-22520/1 crimping tool. For insert arrangements and alternate insert (keying) positions: See MIL-STD-1554. The dimensions and weight requirements shall be as specified in the tables shown on the MS drawings. Dust caps are supplied for front and back end of the

23、connectors. When the Part or Identifying Number (PIN) designates a cable support, the connector and cable support will be furnished unassembled. Materials and finishes: a. The shells shall be of stainless steel material. Type 300 series in accordance with DOD-F-24669/6 and shall be passivated in acc

24、ordance with MIL-STD-171. b. The contacts shall be of telnic bronze and shall be rhodium plated in accordance with SAE-AS39029 . c. The rigid insulation shall be of fired aluminum oxide (ceramic) material. d. Cable supports shall be of 310 stainless steel, casting alloy and shall be passivated in ac

25、cordance with MIL-STD-171. e. Contact retainers - material optional. f. Seals and grommets shall be of silicone rubber. For class K connectors: a. The connectors described herein shall meet all the environmental and electrical requirements of MIL-DTL-26500. b. In addition to the requirements of MIL-

26、DTL-26500, the connectors shall meet the following requirements. 1. Fireproof: A connector plug mated to its applicable receptacle assembly shall be mounted as used in service on a fixture fabricated in accordance with MIL-DTL-5015 and subjected to a 1,093C flame for a period of 60 minutes. The flam

27、e shall be directed at the connector, and shall completely encompass the connector. The temperature of the flame shall be measured at .250 inch, vertical distance from the rear of the connector. The flame shall be produced by using propane fuel with a high air-to-fuel mixture at a flow rate equivale

28、nt to an input of 33,000 to 37,000 BTU/HR. The assembly shall be vibrated continuously at 33 cps Hz with total excursion of .250 inch for 60 minutes. The contacts shall carry the following dc current for the first 5 minutes of the test. Provided by IHSNot for ResaleNo reproduction or networking perm

29、itted without license from IHS-,-,-MS27614F 13 Contact size Amperes 12 16 20 41 22 7.5 During the next minute of test, 110/125 volts at 60 Hz shall be applied between adjacent contacts and between contacts and the shell without exceeding 2 amperes of line current. Throughout the test, there shall be

30、 no passing of Flames through the connector, nor shall there be any secondary combustion at the rear of the panel mounted connector. There shall be no adapters or extensions other than the standard cable clamp assembled to the connectors during the fireproof test. 2. Insulation resistance, fireproof

31、: After the flame test, the connectors shall be allowed to cool to room temperature, the mated connectors shall then be subjected to a test potential of 500 V dc. The insulation resistance of the connectors shall be greater than 2,000 megohms. 3. Dielectric withstanding voltage, fireproof. After exp

32、osure to the flame and insulation resistance tests, the mated connectors shall be subjected to 1500 V ac rms. Applied between adjacent contacts and the contacts closest to the shell, there shall be no evidence of breakdown or flashover. 4. Contact retention, fireproof after exposure to the flame, in

33、sulation resistance and dielectric withstanding tests, the individual contact locking mechanism shall withstand the axial loads specified in the table. Contact size Axial load (lbs.) (fireproof) 12 16 20 23 18 12 The load shall be applied to the contact as specified in MIL-DTL-26500 and shall be app

34、lied at a rate of one pound per second. All dimensions shown are in inches and are after plating dimensions. The four keys and/or keyways shall be within .004 of true position relative to the master key. The connector described in this MS drawing is classified as class K firewall connector. The shel

35、l sizes range from 12 to 28 and shall conform to the applicable portions of MIL-DTL-26500. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS27614F 14 PIN example: MS27614 K 12 T 08 P 06 P MS number Class Form size Coupling type Insert arrangement Co

36、ntact style Alternate insert Position (omit for normal position) Cable support (D = long support, P = short support) Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. Referenced docum

37、ents. In addition to MIL-DTL-26500, this document references the following: DOD-F-24669/6 MIL-C-22520/1 SAE-AS39029 MIL-STD-171 MIL-STD-1554 MIL-DTL-5015 MIL-DTL-83723 MS24266 MS27615 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS27614F 15 CONCLU

38、DING MATERIAL Custodians: Preparing activity: Air Force 85 DLA CC DLA CC Review activities: (Project 5935-2009-126) Air Force 19, 99 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-