1、 MS27619B 14 October 2009 SUPERSEDING MS27619A 29 September 2000 DETAIL SPECIFICATION SHEET NIPPLE SUB ASSEMBLY, FLARED, STRAIGHT-WITH SWIVEL NUT This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described
2、herein shall consist of this specification sheet and MIL-DTL-83296. FIGURE 1. Straight, flared, nipple sub assembly. AMSC N/A FSC 4730 INCH-POUND Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS27619B 2 PIN Nipple A .015 (0.38) inch (mm) MS27619-4C
3、 MS27626-4C .807 (20.50) MS27619-6C MS27626-6C .906 (23.01) MS27619-8C MS27626-8C 1.030 (26.16) MS27619-10C MS27626-10C 1.073 (27.25) NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for information only. 3. Dimensioning and tolerancing are in accordance with ASME Y14.5M. 4. Any d
4、esign of adapter component to the left of plane A-A is acceptable provided that dimension A, provided the requirements specified herein and the requirements of MIL-DTL-83296 are met. FIGURE 1. Straight, flared, nipple sub assembly - Continued. REQUIREMENTS: Dimensions and configurations: The design,
5、 construction, and physical dimensions shall be in accordance with MIL-DTL-83296 and figure 1, in case of conflict between this specification sheet and MIL-DTL-83296, this specification sheet shall govern. This part for use with MIL-DTL-83298 hose and hose assemblies in accordance with MIL-DTL-32330
6、. Material: Material shall be corrosion resistant steel. Finish: Finish shall be passivated in accordance with MIL-DTL-83296. PIN example: MS27619 -4 C PIN example: MS27619-4C indicates a nipple sub-assembly straight 1/4 inch, CRES. Material (C for CRES) Dash size (see figure 1) Specification sheet
7、number MS prefix Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS27619B 3 Changes from previous issue. Marginal notations are not used in this revision to identify changes due to the extent of the changes Referenced documents. In addition to MIL-DT
8、L-83296, this document references the following: MIL-DTL-83298 MIL-DTL-32330 ASME Y14.5M SAE-AS4395 CONCLUDING MATERIAL Custodians: Preparing activity: Army - AV DLA - CC Navy - AS Air Force - 99 (Project 4730-2008-037) DLA - CC Review activities: Navy - MC, SA Air Force - 71 NOTE: The activities li
9、sted above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-
copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
备案/许可证编号:苏ICP备17064731号-1