DLA MS27629 REV B-2009 ADAPTER ASSEMBLY FLARELESS STRAIGHT TUBE TO HOSE-WITH SWIVEL NUT.pdf

1、 MS27629B 22 October 2009 SUPERSEDING MS27629A 29 September 2000 DETAIL SPECIFICATION SHEET ADAPTER ASSEMBLY, FLARELESS, STRAIGHT, TUBE TO HOSE-WITH SWIVEL NUT This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the prod

2、uct described herein shall consist of this specification sheet and MIL-DTL-83296. FIGURE 1. Adapter assembly, flareless, straight. AMSC N/A FSC 4730 INCH-POUND Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS27629B 2 PIN Nipple sub assembly Sleeve

3、Socket A max inch (cm) MS27629-4C MS27632-4C MS27623-4C MS27622-4C 1.73 (4.39) MS27629-6C MS27632-6C MS27623-6C MS27622-6C 1.89 (4.80) MS27629-8C Ms27632-8C MS27623-8C MS27622-8C 2.21 (5.61) MS27629-10C MS27632-10C MS27623-10C MS27622-10C 2.41 (6.12) NOTES: 1. Dimensions are in inches. 2. Metric equ

4、ivalents are given for information only. 3. Dimensioning and tolerancing are in accordance with ASME Y14.5M. FIGURE 1. Adapter assembly, flareless, straight - Continued. REQUIREMENTS: Dimensions and configurations: The design, construction, and physical dimensions shall be in accordance with MIL-DTL

5、-83296 and figure 1, in case of conflict between this specification sheet and MIL-DTL-83296, this specification sheet shall govern. This part for use with MIL-DTL-83298 hose and hose assemblies in accordance with MIL-DTL-32330. Material: Material shall be corrosion resistant steel (CRES), class 304

6、in accordance with SAE-AMS5639, 304L in accordance with SAE-AMS5647, 316 in accordance with SAE-AMS5648, or 321 in accordance with SAE-AMS5645, or condition A (accepted classes only), in accordance with ASTM A276. Finish: Finish shall be passivated in accordance with MIL-DTL-83296. PIN example: MS27

7、629 -4 C PIN example: MS27629-4C indicates an adapter assembly straight 1/4 inch, CRES. Specification sheet number Dash size (see figure 1) Material (C for CRES) MS prefix Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS27629B 3 Changes from previo

8、us issue. Marginal notations are not used in this revision to identify changes due to the extent of the changes. Referenced documents. In addition to MIL-DTL-83296, this document references the following: MIL-DTL-83298 MIL-DTL-32330 ASME Y14.5M ASTM A276 SAE-AMS5639 SAE-AMS5645 SAE-AMS5647 SAE-AMS56

9、48 SAE-AS33514 CONCLUDING MATERIAL Custodians: Preparing activity: Army - AV DLA - CC Navy - AS Air Force - 99 (Project 4730-2008-059) DLA - CC Review activities: Navy - MC, SA Air Force - 71 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-