DLA MS27735 REV E-2011 SWITCH TOGGLE TWO POLE ENVIRONMENTALLY SEALED SOLDER TERMINAL.pdf

1、AMSC N/A FSC 5930 INCH-POUND MS27735E 18 April 2011 SUPERSEDING MS27735D 28 September 1987 DETAIL SPECIFICATION SHEET SWITCH, TOGGLE, TWO POLE, ENVIRONMENTALLY SEALED, SOLDER TERMINAL This specification is approved for use by all Departments and Agencies of the Department of Defense. The complete re

2、quirements for acquiring the switch described herein shall consist of this specification and the latest issue of MIL-DTL-3950. FIGURE1. Dimensions and configuration Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS27735E 2 FIGURE 1 Dimensions and co

3、nfiguration Continued NOTES: 1. Dimensions are inches. 2. Metric equivalents are given for general information only. 3. Unless otherwise specified, tolerance is .020 (0.51 mm) for two place decimals and .005 (0.13 mm) for three place decimals. 4. For hardware and terminal screw detail specifications

4、, see appendix of MIL-DTL-3950. 5. In event of a conflict between the text of this standard and the reference cited herein, the text of this standard shall take precedence. FIGURE1. Dimensions and configuration - Continued Inches mm Inches mm .008 0.20 .25 6.4 .012 0.30 .26 6.6 .015 0.38 .38 9.7 .03

5、 0.8 .432 10.97 .076 1.93 .469 11.91 .090 2.29 .47 11.9 .130 3.30 .69 17.5 .18 4.6 .910 23.11 .19 4.8 1.340 34.04 .240 6.10 1.370 34.80 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS27735E 3 REQUIREMENTS All switches on this standard are designed

6、 so that the movement of the switch mechanism is opposite to that of the toggle lever. Maximum weight is 0.12 pound. Electrical rating: See table I. TABLE I Detail Requirements. MS part No. Circuit with Toggle Lever In Current capacity (amperes) 28 volts DC Current capacity(amperes) 115 volts, 60 an

7、d 400 Hertz AC Keying side Center Opposite keying side Lamp-Load circuit Resistive circuit Inductive circuit Lamp-Load circuit Resistive circuit Inductive circuit MS27735-1 1-2 On 4-5 1-2 On 5-6 2-3 On 5-6 7 20 15 4 15 15 MS27735-2 Mom. 1-2 On 4-5 1-2 On 5-6 2-3 On 5-6 5 18 10 2 11 8 MS27735-3 Mom.

8、1-2 On 4-5 1-2 On 5-6 Mom. 2-3 On 5-6 MS27735-21 1-2 On 4-5 Off 2-3 On 5-6 7 20 15 4 15 15 MS27735-22 Off None 2-3 On 5-6 MS27735-23 1-2 On 4-5 None 2-3 On 5-6 MS27735-24 None Off 2-3 On 5-6 MS27735-25 None Mom. Off 2-3 On 5-6 5 18 10 2 11 8 MS27735-26 Mom. 1-2 On 4-5 None 2-3 On 5-6 MS27735-27 Mom.

9、 1-2 On 4-5 Off Mom. 2-3 On 5-6 MS27735-28 Mom. 1-2 On 4-5 Off None MS27735-29 Mom. Off None 2-3 On 5-6 MS27735-30 Mom. 1-2 On 4-5 None Off MS27735-31 Mom. 1-2 On 4-5 Off 2-3 On 5-6 MS27735-32 None 1-2 On 4-5 Mom. 2-3 On 5-6 MS27735-33 None 1-2 On 4-5 2-3 On 5-6 7 20 15 4 15 15 Provided by IHSNot fo

10、r ResaleNo reproduction or networking permitted without license from IHS-,-,-MS27735E 4 Referenced documents MIL-DTL-3950 Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes. Custodians: Preparing activity Army CR D

11、LA CC Navy AS Air Force 85 (Project 5930-2011-057) DLA CC Review activities Army AR, AV, MI Navy EC, MC Air Force 99 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.daps.dla.mil/ . Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-