DLA MS28131 REV H-2012 TRANSMITTER PRESSURE SYNCHRO AIRCRAFT 320 DEGREE MOVEMENT HIGH TEMPERATURE (177 DEG C) GENERAL PURPOSE.pdf

1、 Comments, suggestions, or questions on this document should be addressed to DLA Aviation VEB, 8000 Jefferson Davis Highway, Richmond, VA 23297-5616, or e-mailed to STDZNMGTdla.mil. Since contact information can change, you may want to verify the currency of this address information using the ASSIST

2、 database at https:/assist.daps.dla.mil/. AMSC N/A FSC 6620 INCH-POUND MS28131H 12 January 2012 SUPERSEDING MS28131G 29 November 1978 DETAIL SPECIFICATION SHEET TRANSMITTER, PRESSURE, SYNCHRO, AIRCRAFT 320 DEGREE MOVEMENT, HIGH TEMPERATURE (177 DEG C) GENERAL PURPOSE Inactive for new design after 10

3、 August 1999. This specification is approved for use by all Departments and Agencies of the Department of Defense. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS28131H 2 FIGURE 1. Transmitter, pressure, synchro. Provided by IHSNot for ResaleNo re

4、production or networking permitted without license from IHS-,-,-MS28131H 3 TABLE I. Transmitter pressure ranges. DASH NO. NAME L MARKING IDENTIFICATION (NOTE 1) FOR AREAS: BOSSES OR FITTING ENDS REQUIRED FOR AREAS: A B C* (NOT SHOWN) A B C* -1T 0-10 PSI DIFFERENTIAL PRESS. 4.812 P1P2- SAE-AS5202-04

5、* SAE-AS5202-04 * - -2T 0-10 PSI GAGE PRESS. P V - - -3T 0-25 PSI DIFFERENTIAL PRESS. P1P2- - -4T 0-25 PSI GAGE PRESS. P V - - -5T 0-50 PSI DIFFERENTIAL PRESS. P1P2- - -6T 0-50 PSI GAGE PRESS. P V - - -7T 0-100 PSI DIFFERENTIAL PRESS. P1P2- - -8T 0-100 PSI GAGE PRESS. P V - -9T 0-250 PSI DIFFERENTIA

6、L PRESS. P1P2CPR * -10T 0-250 PSI GAGE PRESS. P V & CPR - - -11T 0-300 PSI DIFFERENTIAL PRESS. P1P2CPR * -12T 0-300 PSI GAGE PRESS. P V& CPR - - -13T 0-500 PSI DIFFERENTIAL PRESS. P1P2CPR * -14T 0-500 PSI GAGE PRESS. P V & CPR - - -15T 0-1000 PSI GAGE PRESSURE P V & CPR - - - -16T 0-1000 APPROXIMATE

7、 GAGE PRESS. P - CPR - * -17T 0-2500 APPROXIMATE GAGE PRESS. P - CPR - * -18T 0-5000 APPROXIMATE GAGE PRESS. P - CPR SAE-AS5202-04 * * -19T 0-150 PSI DIFFERENTIAL PRESS. P1P2CPR * -20T 0-150 PSI GAGE PRESS. P V & CPR - - -21T 0-200 PSI DIFFERENTIAL PRESS. P1P2CPR * -22T 0-200 PSI GAGE PRESS. P V & C

8、PR - - * LOCATION OPTIONAL ON BACK PLATE. * SAE-AS5202-04 EXCEPT THREADS SHALL BE .437-20UNF-3B AND “C” DIMENSION NEED NOT BE CONFORMED TO. * SAE-AS4395E2 EXCEPT THREADS SHALL BE .312-24UNF-3A Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS28131H

9、4 NOTES 1. MARKING SHALL BE RAISED .030 MINIMUM AND PAINTED TO CONTRAST. SUBSTITUTE THE PROPER IDENTIFICATION FOR (A) AND (B) AS LISTED IN TABLE I. IF A “C” CONNECTION IS REQUIRED, IT SHALL BE IDENTIFIED BY “CPR”. 2. ZERO ADJUSTMENT PROTECTION SHALL BE TO THE CASE AND ACCESS TO OR OPERATION OF THE A

10、DJUSTMENT MECHANISM SHALL NOT REQUIRE DETACHMENT OF PARTS. LOCKWIRING IS PERMISSIBLE PROVIDED IT IS INTENDED PRIMARILY TO DISCOURAGE UNAUTHORIZED ADJUSTMENT AND IS NOT THE SOLE MEANS OF PREVENTING MOVEMENT DURING TRANSMITTER USAGE. 3. DIMENSIONS ARE IN INCHES. 4. METRIC EQUIVALENT S (TO THE NEAREST

11、.01mm) ARE GIVEN FOR GENERAL INFORMATION ONLY AND ARE BASED UPON 1 INCH 25.4mm. 5. REFERENCED DOCUMENTS SHALL BE OF THE ISSUE IN EFFECT ON DATE OF INVITATIONS FOR BIDS OR REQUEST FOR PROPOSAL EXCEPT THAT REFERENCED ADOPTED INDUSTRY DOCUMENTS SHALL GIVE THE DATE OF THE ISSUE ADOPTED. 6. FOR DESIGN FE

12、ATURE PURPOSES, THE STANDARD TAKES PRECEDENCE OVER PROCUREMENT DOCUMENTS REFERENCED HEREIN. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS28131H 5 CHANGES FROM PREVIOUS ISSUE. Marginal notations are not used in this revision to identify changes w

13、ith respect to the previous issue due to the extent of the changes. Custodians: Preparing Activity: Army - AV Navy - AS Air Force - 11 DLA GS1 (Project 6620-2012-001) Review Activities: Navy - CG Air Force - 99 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST database at https:/assist.daps.dla.mil/. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-