DLA MS51812 REV F-1987 NIPPLE TUBE BULKHEAD FLARELESS TYPE HYDRAULIC [Refer To SAE J514 SAE J514 SAE J514 SAE J514 SAE J514]《非扩口舱壁液压管螺纹接套》.pdf

1、-d U I f EO. SUP. CLASS f O LSLEEVE-MS51825 -0- O.D. ASSY *BODY NOM 1 21 1/8 2 22 3/16 3 23 . 1/4 4 24 5/16 5 25 3/8 6 26 1/2 7 27 5/8 8 28 3/4 9 29 7/8 5/16-24UNF 9/16 0.093 0.250 .375 3/8 -24UNF 5/8 0.125 0.313 .422 11/16 I 0.203 I 0.364 .453 3/4 I 0.234 I 0.427 I .453 9/16-18UNF 13/16 0.281 0.482

2、 1-1/16-12UN 1-318 0.656 0.945 1-3/16-12UN i-1/2 0.718 1.070 !.o2 +.o2 1.02 1.71 1.06 1.80 1.12 1.89 1.12 1.89 1.17 1.98 1.31 2.22 1.45 2.48 1.56 2.72 1.56 2.72 I 10 30 1 1-5/16-12UN 1-5/8 0.875 1.195 4688 1.56 2.72 11 31 1-1/4 1-5/8 -12UN 1-7/8 1.093 1.507 .688 1.56 2.80 12 13 33 2 2-1/2 -12UN 2-3/

3、4 1.813 2.381 .688 li77 3.23 32 i-li2 1-7/8 -12UN 2-1/8 1.344 1.756 .688 1.56 2.87 FOR NOTES. SEE SHEET 2. Denotes change TITLE M IL IT A RY ST A DA I D A. AR hmr Cuit 99 AIS51812 NIPPLE, TUBE, BULKHEAD, FLARELESS TYPE, IOCUREMENT SPECIFKATIDI WPERSEDEI C-7 in part, and 17.1 in part WET 1 ff 2 HYDRA

4、ULIC MIL-F-18866 DD 672-1 (Coordinated) -mwoui mimm o* im8 ven arna .miri $730-0678 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-flS51812 REV F LI7 7779312 0011007 O 1- 4730 - NOTES : 1. WATERIAL: Steel, carbon in accordance with procurement speci

5、fication. Steel, corrosion-resistiu in accordance with procurement specification. 2. PROTECTIVE COATIIG! Cadrim plated in accordance with procurement specification. Zinc dated in accordance with procurement specification. Phos hate coating in accordance- with Passfvation treatment in accordance w!th

6、 procurement specification. rocureent specification. 3. DIMENSIONING AND TOLERANCES: Dimensions and tolerances not shown shall be in accordance with the SAE Standard for Flareless Tube Fittings (SAE 3514). 4. THREADS: Threads shll be in accordance with Screw-Thread Standards for Federal Services, FE

7、D-STD-828. B. 5. PART NUMBER: The MS part number consists of the MS number, plus the .dash number and (for complete assembly) the applicable MS51825 sleeve style designator. A. For complete assembly (with nuts and sleeves), cadmium plated, use the MS number, plus the assembly dash number and the sle

8、eve style designator. Example: MS51812-1A or MS51812-1B. B. For the body only, cadmium plated, use the MS number and the body dash number. . Example: MS51812-21. C. For zinc coating add “2“ and (for complete assembly) the sleeve style designator to the dash number. Example: MS51812-1ZA or MS51812-1Z

9、B or MS51812-212. D. For phosphate coating add “Pti and (for complete assembly) the sleeve style designator to the dash number. Example: MS51812-1Ph or MS51812-1PB or MS51812-21P. E. For corrosion-resisting steel add “SS“ and (for complete assembly) the sleeve style designator to the dash number. Ex

10、ample! MS51812-1SSA or 6. For desian feature purposes, this standard takes precedence over procurement documents refer- 7. 8. * 9. enced herein. Reference documents shall be of the issue in effect on date of invitations for bid. dlmensioned. Mter 22 NOV 1974 for erintenance. illustration is for iden

11、tification and is not intended to restrict designs or shapes not , bodies will be used for production only and SHALL NOT be stocked Existing stock of,bodies should be used until depleted. lu. CAUTION: The following data is furnished for the purpose of new design only and is not in- tended to imply i

12、nterchangeability. 9 MS5112 will replace MS39199 for new design after approval date on this document. Table II below gives reference data for coordination of equivalent tube sizes, in both compression and hydraulic type nipples. Assembly replacement is authorized. . TABLE II (FOR INFORMATION ONLY) A

13、SSEMBLY EQUIVALENCY PART NUMBER PART NUMBER PART NUMBER COMPRESSION I HYDRAULIC COMPRESSION I HYDRAULIC COMPRESSION I HYDRAULIC HS51812-1 MS39199-5 HS51812-5 MC39199-9 MS51812-9 -2 -6 -6 -10 10 MS39199-1 -2 I.A. TITLE NIPPLE, TUBE, BULKHEAD, FLARELESS TYPE, HYDR AUUC I I WLET 2 OF 2 CMM17 in part, and l.l in part ROCWLUENT KLCIFKATIW WPERSEDEL MIL-F-18866 4n0-08 CIVIOY ami1mm o. TWI ION An, OOLITI. D 1011 , 672- 1 (Coordinated) *U.S. GOVERNMENT PRINTING OFFICE: 1987-704-036/74679 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-