DLA MS51817 REV E-1987 ELBOW PIPE TO TUBE 45 DEGREE MALE PIPE END FLARELESS TYPE HYDRAULIC [Refer To SAE J514 SAE J514 SAE J514 SAE J514 SAE J514]《非扩口液压外螺纹管端45度弯管》.pdf

1、MSSLL7 REV E 47 9999932 OOLLO16 3 A DASH NUHBER P U rl rl E B D 4 M2 N2 STRAIGHT THREAD DIA DIA CLASS 2A DRILL DRILL f.03 +.O3 .-i s a; +( O 1 2 3 U rl a u 21 1/8 1/8 5/16-24UNF 0.093 0.188 0.64 0.52 22 3/16 1/8 3/8 -24UNF 0.125 0,188 0.64 0.52 23 1 /4 1/8 7/16-20UNF 0.203 0.188 0.70 0.64 E-/ 9- pa/

2、 4 5 6 7 8 TABLE I 24 5/16 1/8 1/2 -2OUNF 0.234 0.188 0.73 0.64 25 3/8 1/4 9/16-18UNF 0.281 0.281 0.83 0.86 26 1/2 3/8 3/4 -16UNF 0.422 0.406 0.98 0.95 27 5/8 1/2 7/8 -14UNF 0.500 0.531 1.08 1.17 28 3/4 3/4 1-1/16-12UN 0.656 0.719 1.27 1.20 9 10 11 12 29 7/8 3/4 1-3/16-12UN 0.718 0.719 1.27 1.27 30

3、1 1 1- 5/16-12UN 0.875 0.938 1.36 1.48 31 1-1/4 1-1/4 1-5/8 -12UN 1.093 1.250 1.45 1.67 32 1-1/2 1-1/2 1-7/8 -12UN 1.344 1.500 1.52 1.77 P.A. TITLE :thet Curt gg ELBOW. PIPE TO TUBE.45 MIL IT ARY ST AN DA RD I 13 I 33 I 2 I 2 I 2-1/2 -12UN I 1.813 I 1.938 I 1.83 I 2.11 PROCUREMENT SPECIFICATION MIL-

4、F-18866 FOR NOTES SEE SHEET 2. MS51817 MALE PIPE END, FLARELESS TYPE, HYDRAULIC SUPERSEDES C“x4 in part and 4.1 in part SHEET 1 OF 2 Denotes change DD ,:.9“:, 672-1 (Coordinated) 4730-0083 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-FED. SUP. CLA

5、SS 4730 NOTES : 1. 2. 3. 4. 5. 6. 7. 8. * 9. 10. MATERIAL: Steel, carbon in accordance with procurement specification. Steel, corrosion-resisting in accordance with procurement specification. PROTECTIVE COATING: Cadmium plated in accordance with procurement specification. Zinc plated in accordance w

6、ith Procurement specification. Phosohate coating in accordance with procurement specification. Passivation treatment in accordance with procurement specification. DIMENSIONS AND TOLERANCES: Dimensions and tolerances not shown shall be in accordance with THREADS: Threads shall be in accordance with S

7、crew-Thread Standards for Federal Services, the SAE Standard for Flareless Tube Fittings (CAE 5514). FED-STD-HEB. PART NUMBER: The MS part number consists of the MS number,plus the dash number and (for complete assembly) the applicable MS51825 sleeve style designator. A. For complete assembly (with

8、nut and sleeve), cadmium plated, use the MS number, plus the assembly dash number and the sleeve style designator. Example: MS51817-1A or MS51817-1B. B. For the body only, cadmium plated, use the MS number and the body dash number. Example: MS51817-21. C. For zinc coating add “2“ and (for complete a

9、ssembly) the sleeve style designator to the dash number. Example: MS51817-1ZA or MS51817-1ZB or MS51817-212. D. For phosphate coating add “Pi and (for complete assembly) the sleeve style designator to the dash number. Example: MS51817-1PA or MS51817-1PB or MS51817-21P. E. For corrosion-resisting ste

10、el add “SS“ and (for complete assembly) the sleeve style designator to the dash number. Example: MS51817-1SSA or MS51817LlSSB or MS51817-21SS. For design feature purposes, this standard takes precedence over procurement documents refer- enced herein. Reference documents shall be of the issue in effe

11、ct on date of invitations for bid. The illustration is for identification and is not intended to restrict designs or shapes not dimensioned. maintenance. , bodies will be used for production only and SHALL NOT be stocked for After 22 NOV 1974 Existing stock of bodies should be used until depleted. C

12、AUTION: The following data is furnished for the purpose of new design only and is not in- tended to imply interchangeability. aMS51817 will replace MS39204 for new design after approval date on this document. Table II below gives reference data for coordination of equivalent tube sizes, in both comp

13、ression and hydraulic type elbows. Assembly replacement is authorized. TABLE II (FOR INFORMATION ONLY) ASSEMBLY EQUIVALENCY 1 PART NUMBER PART NUMBER PART NUMBER COMPRESSION I HYDRAULIC COMPRESSION I HYDRAULIC I COMPRESSION I HYDRAULIC MS39204-1 MS5 181 7- 1 MC39204-5 MS51817-5 MC39 20 4-9 MC51817-9

14、 -2 -2 -6 -6 -10 -10 -11 -3 -3 -7 -7 -4 -4 -8 -8 -12 -12 -11 1 - TITLE MIL IT ARY ST AN DA RD MS51817 -A. AR iher Curt 99 ELBOW, PIPE TO TUBE, 45, MALE HYDRAULIC PIPE END, FLARELESS TYPE, ROCUREMENT SPECIFICATION WPERIEDEI: C“X4 in part, and 4.1 in part SHEET 2 Of 2 MIL-F-18866 A AR- 1 1 Of Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-