DLA MS51825 REV H (1)-2008 SLEEVES CLINCHES TUBE FITTING FLARELESS TYPE HYDRAULIC [Use SAE J514 SAE J514 SAE J514 SAE J514 SAE J514].pdf

1、INCH-POUND MS51825H w/AMENDMENT 1 5 June 2008 SUPERSEDING MS51825H 24 March 2008 DETAIL SPECIFICATION SHEET SLEEVES, CLINCHES, TUBE FITTING, FLARELESS TYPE, HYDRAULIC Inactive for new design after 17 August 1999. For new design, use SAE-J514. This specification is approved for use by all Departments

2、 and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-F-18866. Inches mm .005 .010 0.13 0.25STYLE - A FIGURE 1. Sleeves, clinch, tube fitting. AMSC N/A FSC 4730 Provided by IHSNot for ResaleNo reprodu

3、ction or networking permitted without license from IHS-,-,-MS51825H w/AMENDMENT 1 2Dash number style A Tube O.D. A dia. Inches (mm) +.003 (0.08) -.000 C dia. Inches (mm) +.005 (0.13) -.000 D dia. Inches (mm) +.000 -.003 (0.08) E dia. Inches (mm) +.003 (0.08) -.000 F Inches (mm) .003 (0.08) -1 1/8 .1

4、30 (3.30) .237 (6.02) .178 (4.52) .140 (3.56) .288 (7.32) -2 3/16 .193 (4.90) .307 (7.80) .249 (6.32) .205 (5.21) .329 (8.36) -3 1/4 .255 (6.48) .367 (9.32) .312 (7.92) .268 (6.81) .363 (9.22) -4 5/16 .318 (8.08) .430 (10.92) .375 (9.53) .330 (8.38) .367 (9.32) -5 3/8 .380 (9.65) .492 (12.50) .440 (

5、11.18) .393 (9.98) .393 (9.98) -6 1/2 .505 (12.83) .663 (16.84) .587 (14.91) .521 (13.23) .429 (10.90) -7 5/8 .631 (16.03) .780 (19.81) .713 (18.11) .647 (16.43) .442 (11.23) -8 3/4 .756 (19.20) .925 (23.50) .838 (21.29) .772 (19.61) .475 (12.07) -9 7/8 .881 (22.38) 1.040 (26.42) .963 (24.46) .897 (

6、22.78) .475 (12.07) -10 1 1.006 (25.55) 1.187 (30.15) 1.088 (27.64) 1.022 (25.96) .475 (12.07) -11 1-1/4 1.260 (32.00) 1.446 (36.73) 1.341 (34.06) 1.275 (32.39) .475 (12.07) -12 1-1/2 1.510 (38.35) 1.694 (43.03) 1.590 (40.39) 1.524 (38.71) .475 (12.07) -13 2 2.014 (51.16) 2.210 (56.13) 2.094 (53.19)

7、 2.026 (51.46) .509 (12.93) Dash number style A G Inches (mm) +.000 -.006 (0.15) H Inches (mm) +.016 (0.41) -.000 J Max Inches (mm) K ref Inches (mm) L Inches (mm) .000 -.005 (0.13) M Inches (mm) +.003 (0.08) -.002 (0.05) -1 .046 (1.17) .078 (1.98) .130 (3.30) .027 (0.69) .152 (3.86) .020 (0.51) -2

8、.047 (1.19) .078 (1.98) .130 (3.30) .027 (0.69) .218 (5.54) .020 (0.51) -3 .049 (1.24) .109 (2.77) .161 (4.09) .027 (0.69) .285 (7.24) .025 (0.64) -4 .049 (1.24) .125 (3.18) .171 (4.34) .027 (0.69) .352 (8.94) .025 (0.64) -5 .049 (1.24) .125 (3.18) .156 (3.96) .029 (0.74) .418 (10.62) .025 (0.64) -6

9、 .068 (1.73) .162 (4.11) .260 (6.60) .044 (1.12) .555 (14.10) .030 (0.76) -7 .064 (1.63) .181 (4.60) .247 (6.27) .042 (1.07) .681 (17.30) .030 (0.76) -8 .076 (1.93) .181 (4.60) .270 (6.86) .050 (1.27) .807 (20.50) .030 (0.76) -9 .083 (2.11) .181 (4.60) .275 (6.99) .052 (1.32) .931 (23.65) .030 (0.76

10、) -10 .083 (2.11) .187 (4.75) .265 (6.73) .054 (1.37) 1.056 (26.82) .030 (0.76) -11 .083 (2.11) .187 (4.75) .245 (6.22) .062 (1.57) 1.309 (33.25) .030 (0.76) -12 .086 (2.18) .187 (4.75) .245 (6.22) .062 (1.57) 1.559 (39.60) .030 (0.76) -13 .092 (2.34) .187 (4.75) .258 (6.55) .070 (1.78) 2.059 (52.30

11、) .030 (0.76) Dash number style A N Inches (mm) -1 .171 (4.34) -2 .242 (6.15) -3 .303 (7.70) -4 .366 (9.30) -5 .431 (10.95) -6 .577 (14.66) -7 .703 (17.86) -8 .828 (21.03) -9 .953 (24.21) -10 1.078 (27.38) -11 1.331 (33.81) -12 1.580 (40.13) -13 2.084 (52.93) FIGURE 1. Sleeves, clinch, tube fitting

12、- Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS51825H w/AMENDMENT 1 3Inches mm .007 .015 .020 .030 0.18 0.38 0.51 0.76 STYLE - B B dia. Dash number style B A dia. .005 (0.13) Inches (mm) Min Inches (mm) Max Inches (mm) C dia. +.003 (0

13、.08) -.000 Inches (mm) D .003 (0.08) Inches (mm) -1 .203 (5.16) .175 (4.45) .178 (4.52) .129 (3.28) .278 (7.06) -2 .312 (7.92) .252 (6.40) .256 (6.50) .193 (4.90) .278 (7.06) -3 .359 (9.12) .309 (7.85) .313 (7.95) .255 (6.48) .336 (8.53) -4 .422 (10.72) .373 (9.47) .377 (9.58) .318 (8.08) .336 (8.53

14、) -5 .484 (12.29) .431 (10.95) .435 (11.05) .380 (9.65) .375 (9.53) -6 .625 (15.88) .585 (14.86) .589 (14.96) .506 (12.85) .375 (9.53) -7 .750 (19.05) .698 (17.73) .702 (17.83) .633 (16.08) .415 (10.54) -8 .875 (22.23) .836 (21.23) .840 (21.34) .758 (19.25) .415 (10.54) -9 1.000 (25.40) .961 (24.41)

15、 .965 (24.51) .883 (22.43) .415 (10.54) -10 1.125 (28.58) 1.086 (27.58) 1.090 (27.69) 1.008 (25.60) .415 (10.54) -11 1.406 (35.71) 1.339 (34.01) 1.343 (34.11) 1.260 (32.00) .415 (10.54) -12 1.656 (42.06) 1.589 (40.36) 1.593 (40.46) 1.511 (38.38) .415 (10.54) -13 2.188 (55.58) 2.092 (53.14) 2.096 (53

16、.24) 2.014 (51.16) .450 (11.43) FIGURE 1. Sleeves, clinch, tube fitting - Continued. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS51825H w/AMENDMENT 1 4Dash number style B E Max Inches (mm) F radius Inches (mm) G radius Inches (mm) H radius max

17、Inches (mm) J dia. Min Inches (mm) -1 .281 (7.14) .010 (0.25) .007 (0.18) .006 (0.15) .154 (3.91) -2 .281 (7.14) .020 (0.51) .007 (0.18) .006 (0.15) .227 (5.77) -3 .339 (8.61) .020 (0.51) .007 (0.18) .006 (0.15) .286 (7.26) -4 .378 (9.60) .020 (0.51) .007 (0.18) .006 (0.15) .350 (8.89) -5 .418 (10.6

18、2) .020 (0.51) .007 (0.18) .006 (0.15) .408 (10.36) -6 .418 (10.62) .020 (0.51) .010 (0.25) .010 (0.25) .556 (14.12) -7 .418 (10.62) .020 (0.51) .010 (0.25) .010 (0.25) .669 (16.99) -8 .418 (10.62) .020 (0.51) .010 (0.25) .010 (0.25) .807 (20.50) -9 .418 (10.62) .020 (0.51) .010 (0.25) .010 (0.25) .

19、932 (23.67) -10 .418 (10.62) .020 (0.51) .010 (0.25) .010 (0.25) 1.057 (26.85) -11 .418 (10.62) .020 (0.51) .010 (0.25) .010 (0.25) 1.310 (33.27) -12 .418 (10.62) .020 (0.51) .010 (0.25) .010 (0.25) 1.560 (39.62) -13 .456 (11.58) .020 (0.51) .010 (0.25) .010 (0.25) 2.063 (52.40) K Inches (mm) L Diam

20、eter Inches (mm) Dash number style B Min Max Min Max -1 .015 (0.38) .023 (0.58) .148 (3.76) .156 (3.96) -2 .020 (0.51) .028 (0.71) .221 (5.61) .229 (5.82) -3 .024 (0.61) .032 (0.81) .280 (7.11) .288 (7.32) -4 .024 (0.61) .032 (0.81) .344 (8.74) .352 (8.94) -5 .024 (0.61) .032 (0.81) .402 (10.21) .41

21、0 (10.41) -6 .024 (0.61) .032 (0.81) .550 (13.97) .558 (14.17) -7 .024 (0.61) .032 (0.81) .663 (16.84) .671 (17.04) -8 .024 (0.61) .032 (0.81) .801 (20.35) .809 (20.55) -9 .024 (0.61) .032 (0.81) .926 (23.52) .934 (23.72) -10 .024 (0.61) .032 (0.81) 1.051 (26.70) 1.059 (26.90) -11 .024 (0.61) .032 (

22、0.81) 1.304 (33.12) 1.312 (33.32) -12 .024 (0.61) .032 (0.81) 1.554 (39.47) 1.562 (39.67) -13 .024 (0.61) .032 (0.81) 2.057 (52.25) 2.065 (52.45) NOTES: 1. Dimensions are in inches, unless otherwise specified. 2. Metric equivalents are given for information only. 3. This illustration is for identifi

23、cation and is not intended to restrict designs or shapes not dimensioned. FIGURE 1. Sleeves, clinch, tube fitting - Continued. REQUIREMENTS: Dimensions and configuration: See figure 1. Material: Materials shall be in accordance with MIL-F-18866. Provided by IHSNot for ResaleNo reproduction or networ

24、king permitted without license from IHS-,-,-MS51825H w/AMENDMENT 1 5Finish: All platings shown in table I shall be capable of meeting the 96 hour salt spray test in accordance with ASTM B117. TABLE I. Material and finish designators. Designator Material Finish Blank Steel Cadmium plating in accordan

25、ce with SAE-AMS-C-81562, type II, class 3 or SAE-AMS-QQ-P-416, type II, class 2. N Steel NAVAIR trivalent chromium pretreatment (TCP) in accordance with MIL-DTL-81706, type II, class 1a. J Steel Zinc plating with chromate conversion in accordance with ASTM B633; type II or III, Fe/Zn 5, or ASTM B695

26、, type II, class 5. H Steel Zinc phosphate in accordance with MIL-DTL-16232, type Z, class 1 and shall be hexavalent chromium free. P Steel Zinc plating with colorless passivate in accordance with ASTM B633, type VI, Fe/Zn 5. S Corrosion resistant steel 1/ No additional finish. Passivation in accord

27、ance with SAE-AMS2700, type 6 or 7. 1/ V Steel Zinc nickel in accordance with SAE-AMS2417, type 1. 1/ Stainless steel of such hardness as to be capable of biting, fully annealed type 304 stainless steel tubing. Part or Identifying Number (PIN) example: MS51825 - 1 S B MS number Dash number (see figu

28、re 1) Material and finish designator, see table I Style (A or B), see figure 1 Guidance on use of alternative parts with less hazardous or nonhazardous materials. This specification provides for a number of alternative plating materials via the PIN. Users should select the PIN with the least hazardo

29、us material that meets the form, fit and function requirements of their application. For old designs that use clinch sleeves in accordance with MS51825, tables II and III show supersession data to clinch sleeves in accordance with SAE-J514. Users are cautioned to evaluate replacements for their part

30、icular application. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS51825H w/AMENDMENT 1 6TABLE II. Supersession data for MS51825 style - A. Inactive PIN Active SAE Inactive PIN Active SAE Hydraulic PIN 1/ Hydraulic PIN 2/ MS51825-1A J514-2-080115A

31、Q MS51825-1PA J514-2-080115AP MS51825-2A J514-3-080115AQ MS51825-2 PA J514-3-080115AP MS51825-3A J514-4-080115AQ MS51825-3 PA J514-4-080115AP MS51825-4A J514-5-080115AQ MS51825-4 PA J514-5-080115AP MS51825-5A J514-6-080115AQ MS51825-5 PA J514-6-080115AP MS51825-6A J514-8-080115AQ MS51825-6 PA J514-8

32、-080115AP MS51825-7A J514-10-080115AQ MS51825-7 PA J514-10-080115AP MS51825-8A J514-12-080115AQ MS51825-8 PA J514-12-080115AP MS51825-9A J514-14-080115AQ MS51825-9 PA J514-14-080115AP MS51825-10A J514-16-080115AQ MS51825-10 PA J514-16-080115AP MS51825-11A J514-20-080115AQ MS51825-11 PA J514-20-08011

33、5AP MS51825-12A J514-24-080115AQ MS51825-12 PA J514-24-080115AP MS51825-13A J514-32-080115AQ MS51825-13 PA J514-32-080115AP Inactive PIN Active SAE Inactive PIN Active SAE Hydraulic PIN 3/ Hydraulic PIN 4/ MS51825-1 (JA or RA) J514-2-080115AZ MS51825-1SA J514-2-080115AS MS51825-2 (JA or RA) J514-3-0

34、80115AZ MS51825-2SA J514-3-080115AS MS51825-3 (JA or RA) J514-4-080115AZ MS51825-3SA J514-4-080115AS MS51825-4 (JA or RA) J514-5-080115AZ MS51825-4SA J514-5-080115AS MS51825-5 (JA or RA) J514-6-080115AZ MS51825-5SA J514-6-080115AS MS51825-6 (JA or RA) J514-8-080115AZ MS51825-6SA J514-8-080115AS MS51

35、825-7 (JA or RA) J514-10-080115AZ MS51825-7SA J514-10-080115AS MS51825-8 (JA or RA) J514-12-080115AZ MS51825-8SA J514-12-080115AS MS51825-9 (JA or RA) J514-14-080115AZ MS51825-9SA J514-14-080115AS MS51825-10 (JA or RA) J514-16-080115AZ MS51825-10SA J514-16-080115AS MS51825-11 (JA or RA) J514-20-0801

36、15AZ MS51825-11SA J514-20-080115AS MS51825-12 (JA or RA) J514-24-080115AZ MS51825-12SA J514-24-080115AS MS51825-13 (JA or RA) J514-32-080115AZ MS51825-13SA J514-32-080115AS 1/ Designator “C” is for steel, “Q” is for cadmium plating. 2/ Designator “C” is for steel, “P” is for zinc phosphate plating.

37、3/ Designator “C” is for steel, “Z” is for zinc plating. 4/ Designator “S” is for corrosion resistant steel. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS51825H w/AMENDMENT 1 7TABLE III. Supersession data for MS51825 style - B. Inactive PIN Acti

38、ve SAE Inactive PIN Active SAE Hydraulic PIN 1/ Hydraulic Active PIN 2/ MS51825-1B J514-2-080115BQ MS51825-1PB J514-2-080115BP MS51825-2B J514-3-080115BQ MS51825-2PB J514-3-080115BP MS51825-3B J514-4-080115BQ MS51825-3PB J514-4-080115BP MS51825-4B J514-5-080115BQ MS51825-4PB J514-5-080115BP MS51825-

39、5B J514-6-080115BQ MS51825-5PB J514-6-080115BP MS51825-6B J514-8-080115BQ MS51825-6PB J514-8-080115BP MS51825-7B J514-10-080115BQ MS51825-7PB J514-10-080115BP MS51825-8B J514-12-080115BQ MS51825-8PB J514-12-080115BP MS51825-9B J514-14-080115BQ MS51825-9PB J514-14-080115BP MS51825-10B J514-16-080115B

40、Q MS51825-10PB J514-16-080115BP MS51825-11B J514-20-080115BQ MS51825-11PB J514-20-080115BP MS51825-12B J514-24-080115BQ MS51825-12PB J514-24-080115BP MS51825-13B J514-32-080115BQ MS51825-13PB J514-32-080115BP Inactive PIN Active SAE Inactive PIN Active SAE Hydraulic PIN 3/ Hydraulic PIN 4/ MS51825-1

41、(JB or RB) J514-2-080115B (J or R) MS51825-1SB J514-2-080115BS MS51825-2(JB or RB) J514-3-080115B (J or R) MS51825-2SB J514-3-080115BS MS51825-3(JB or RB) J514-4-080115B (J or R) MS51825-3SB J514-4-080115BS MS51825-4(JB or RB) J514-5-080115B (J or R) MS51825-4SB J514-5-080115BS MS51825-5(JB or RB) J

42、514-6-080115B (J or R) MS51825-5SB J514-6-080115BS MS51825-6(JB or RB) J514-8-080115B (J or R) MS51825-6SB J514-8-080115BS MS51825-7(JB or RB) J514-10-080115B (J or R) MS51825-7SB J514-10-080115BS MS51825-8(JB or RB) J514-12-080115B (J or R) MS51825-8SB J514-12-080115BS MS51825-9(JB or RB) J514-14-0

43、80115B (J or R) MS51825-9SB J514-14-080115BS MS51825-10(JB or RB) J514-16-080115B (J or R) MS51825-10SB J514-16-080115BS MS51825-11(JB or RB) J514-20-080115B (J or R) MS51825-11SB J514-20-080115BS MS51825-12(JB or RB) J514-24-080115B (J or R) MS51825-12SB J514-24-080115BS MS51825-13(JB or RB) J514-3

44、2-080115B (J or R) MS51825-13SB J514-32-080115BS 1/ Designator “C” is for steel, “Q” is for cadmium plating. 2/ Designator “C” is for steel, “P” is for zinc phosphate plating. 3/ Designator “C” is for steel, “Z” is for zinc plating. 4/ Designator “S” is for corrosion resistant steel. Amendment notat

45、ions. The margins of this specification are marked with vertical lines to indicate where modifications from this amendment were made. This was done as a convenience only and the Government assumes no liability whatsoever for any inaccuracies in these notations. Bidders and contractors are cautioned

46、to evaluate the requirements of this document based on the entire content irrespective of the marginal notations. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS51825H w/AMENDMENT 1 8Referenced documents. In addition to MIL-F-18866, this document

47、references the following: MIL-DTL-16232 MIL-DTL-81706 ASTM B117 ASTM B633 ASTM B695 SAE-AMS-C-81562 SAE-AMS-QQ-P-416 SAE-AMS2417 SAE-AMS2700 SAE-J514 CONCLUDING MATERIAL Custodians: Preparing activity: Army - AR DLA - CC Navy - SH Air Force - 99 (Project 4730-2008-087) DLA - CC Review activities: Ar

48、my - AT, AV, GL, MI Navy - AS, MC, SA NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-