DLA MS51845 REV D-2009 ELBOWS PIPE BRASS OR BRONZE THREADED 90-DEG STRAIGHT CLASS 125.pdf

1、 DETAIL SPECIFICATION SHEET ELBOWS, PIPE, BRASS OR BRONZE, THREADED, 90-DEG STRAIGHT, CLASS 125 This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet a

2、nd WW-P-460. CHAMFERFACE SQUARE ORBEVELED NOTMORE THAN 5GFBAHEAFIGURE 1. Elbow fitting. AMSC N/A FSC 4730 INCH-POUND MS51845D 15 December 2009 SUPERSEDING MS51845C 28 February 1994 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS51845D 2 Dash numbe

3、r to pipe size. Dash number Pipe size mm - 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 1/8 (.125) 1/4 (.250) 3/8 (.375) 1/2 (.500) 3/4 (.750) 1 (1.000) 1-1/4 (1.250) 1-1/2 (1.500) 2 (2.000) 2-1/2 (2.500) 3 (3.000) 4 (4.000) 3.18 6.35 9.53 12.70 19.05 25.40 31.75 38.10 50.80 63.50 76.20 101.60 N

4、OTES: 1. Metric equivalents are given for information only. 2. Material: Brass or bronze in accordance with ASME-B16.15. 3. Protective Coating: None 4. Dimensions: In accordance with ASME-B16.15, table titled “Dimensions of 90-deg Elbows, Tees, Crosses, 45-deg Elbows, and Couplings (Straight Sizes)

5、Class 125”. 5. Thread: As specified in ASME-B16.15. 6. Marking: In accordance with ASME-B16.15. 7. Part or Identifying Number (PIN): The MS PIN consists of the MS number, the dash number, and the fitting Identification letter(s). When left-hand threads are required, add the letter “L” to the PIN. FI

6、GURE 1. Elbow fitting Continued. PIN: MS 51845 -3 X L Examples: MS51845 - 1 represents a 1 NPS 90 elbow. MS51845 - 9L represents a 2 NPS 90 elbow, left-hand threads. MS prefix Basic specification number Dash number on figure 1 Outside head, inside head, face designator, see figure 1 Thread designato

7、r: Blank right hand thread, L- left hand thread Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MS51845D 3 Changes from previous issue. Marginal notations are not used in this revision to identify changes with respect to the previous issue, due to th

8、e extent of the changes. Referenced documents. In addition to WW-P-460, this document references the following: ASME-B16.15 CONCLUDING MATERIAL Custodians: Preparing activity: Army - AT DLA - CC Navy - MC Air Force - 99 DLA - CC (Project 4730-2009-013) Review activities: Army - AR, CE, EA Navy SA, S

9、H, YD Air Force - 71 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http:/assist.daps.dla.mil Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-