DLA OO-S-256 K-2012 SEWING MACHINE INDUSTRIAL GENERAL SPECIFICATION FOR.pdf

1、 OO-S-256K/GEN 6 FEBRUARY 2012 SUPERSEDING OO-S-256J/GEN 3 MAY 2006 FEDERAL SPECIFICATION SEWING MACHINE, INDUSTRIAL, GENERAL SPECIFICATION FOR The General Services Administration has authorized the use of this Federal specification by all Federal agencies. 1. SCOPE 1.1 Scope. This specification cov

2、ers the general requirements for commercial, industrial sewing machines used in the textile and leather industry. The specific requirements for the individual sewing machines are covered by the detail specifications listed in 6.6. 2. APPLICABLE DOCUMENTS 2.1 Government publications. The following do

3、cuments, of the issues in effect on the date of invitation for bids or request for proposal, form a part of this specification to the extent specified herein. Federal Regulation 29 CFR 1910 Occupational Safety and Health Act (OSHA) Standards (The Code of Federal Regulations (CFR) and the Federal Reg

4、ister (FR) are for sale on a subscription basis by the Superintendent of Documents, US Government Printing Office, Washington, DC 20402. When indicated, reprints of certain regulations may be obtained from the Federal Agency responsible for issuance thereof.) AMSC N/A FSC 3530 Comments, suggestions,

5、 or questions on this document should be addressed to: Defense Supply Center Philadelphia, ATTN: DSCP-ITAA, 700 Robbins Avenue, Philadelphia, PA 19111-5096 or emailed to dscpg Flatbed, SingleNeedle, Machines OOS256/2 Sewing Machines, Industrial; Flatbed, TwoNeedle, Machines OOS256/3 Sewing Machines,

6、 Industrial; Cylinder Bed, Single Needle, Machines OOS256/4 Sewing Machines, Industrial; Post Bed, SingleNeedle Machines OOS256/5 Sewing Machines, Industrial; Zigzag, SingleNeedle, Machines OOS256/6 Sewing Machines, Industrial; Buttonhole, Straight, Barred Ends, Machines OOS256/7 Sewing Machines, In

7、dustrial; Buttonholes, Eyelet End, Machines OOS256/8 Sewing Machines, Industrial; ButtonSewing Machine OOS256/9 Sewing Machine, Industrial; Tacking Machine OOS256/10 Sewing Machine, Industrial; Overedge, Machine OOS256/11 Sewing Machine, Industrial; Blind Stitch, Machines OOS256/12 Sewing Machines,

8、Industrial; SingleNeedle, Heavy Leather Duty, Machine OOS256/13 Sewing Machine, Industrial; Flatbed, Single Needle, 301 Stitch, Parachute Repair OOS256/14 Sewing Machine, Industrial; Flatbed, Single Needle, 308 Stitch, Parachute Repair OOS256/15 Sewing Machine, Industrial; Flatbed, Double Needle, 30

9、1 Stitch, Parachute Repair OOS256/16 Sewing Machine, Industrial; Darning, Cylinder Bed, Single Needle, 301 Stitch, Parachute Repair Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-OO-S-256K/GEN 17 6.7 Subject term (keyword) listing. Buttonhole, Banne

10、d Ends Buttonhole, Eyelet End Cylinder bed, Single-Needle Flatbed, Two-Needle Post Bed, Single-Needle 6.8 Changes from previous issue. The margins of this specification are marked with vertical lines to indicate where changes from the previous issue were made. This was done as a convenience only and

11、 the Government assumes no liability whatsoever for any inaccuracies in these notations. Bidders and contractors are cautioned to evaluate the requirements of this document based on the entire content irrespective of the marginal notations and relationship to the last previous issue. MILITARY INTERE

12、STS Custodians: Preparing activity: Army GL DLA-IS Navy - SA Air Force 99 (Project No. 3530-2011-002) Review Activities: Navy MC Air Force 50, 84 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-