1、 REVISIONS LTR DESCRIPTION DATE (YR-MO-DA) APPROVED A Update drawing to current requirements. Editorial changes throughout. - gap 08-12-18 Robert M. Heber REV SHET REV SHET REV STATUS REV A A A A A A A A A A A A A OF SHEETS SHEET 1 2 3 4 5 6 7 8 9 10 11 12 13 PMIC N/A PREPARED BY Larry T. Gauder DEF
2、ENSE SUPPLY CENTER COLUMBUS STANDARD MICROCIRCUIT DRAWING CHECKED BY Charles F. Saffle COLUMBUS, OHIO 43218-3990 http:/www.dscc.dla.mil THIS DRAWING IS AVAILABLE FOR USE BY ALL DEPARTMENTS APPROVED BY Thomas M. Hess MICROCIRCUIT, DIGITAL, BIPOLAR, HIGH-SPEED LOOK-AHEAD CARRY GENERATOR, AND AGENCIES
3、OF THE DEPARTMENT OF DEFENSE DRAWING APPROVAL DATE 01-03-06 MONOLITHIC SILICON AMSC N/A REVISION LEVEL A SIZE A CAGE CODE 67268 5962-01507 SHEET 1 OF 13 DSCC FORM 2233 APR 97 5962-E276-08 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICRO
4、CIRCUIT DRAWING SIZE A 5962-01507 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43218-3990 REVISION LEVEL A SHEET 2 DSCC FORM 2234 APR 97 1. SCOPE 1.1 Scope. This drawing documents two product assurance class levels consisting of high reliability (device classes Q and M) and space application (devic
5、e class V). A choice of case outlines and lead finishes are available and are reflected in the Part or Identifying Number (PIN). When available, a choice of Radiation Hardness Assurance (RHA) levels are reflected in the PIN. 1.2 PIN. The PIN is as shown in the following example: 5962 - 01507 01 Q E
6、X Federal stock class designator RHA designator (see 1.2.1) Devicetype (see 1.2.2)Deviceclass designatorCaseoutline (see 1.2.4) Lead finish (see 1.2.5) / (see 1.2.3) / Drawing number 1.2.1 RHA designator. Device classes Q and V RHA marked devices meet the MIL-PRF-38535 specified RHA levels and are m
7、arked with the appropriate RHA designator. Device class M RHA marked devices meet the MIL-PRF-38535, appendix A specified RHA levels and are marked with the appropriate RHA designator. A dash (-) indicates a non-RHA device. 1.2.2 Device type(s). The device type(s) identify the circuit function as fo
8、llows: Device type Generic number Circuit function 01 AM2902A High-speed look-ahead carry generator 1.2.3 Device class designator. The device class designator is a single letter identifying the product assurance level as follows: Device class Device requirements documentation M Vendor self-certifica
9、tion to the requirements for MIL-STD-883 compliant, non-JAN class level B microcircuits in accordance with MIL-PRF-38535, appendix A Q or V Certification and qualification to MIL-PRF-38535 1.2.4 Case outline(s). The case outline(s) are as designated in MIL-STD-1835 and as follows: Outline letter Des
10、criptive designator Terminals Package style E GDIP1-T16 or CDIP2-T16 16 Dual-in-line package 2 CQCC1-N20 20 Square leadless chip carrier 1.2.5 Lead finish. The lead finish is as specified in MIL-PRF-38535 for device classes Q and V or MIL-PRF-38535, appendix A for device class M. Provided by IHSNot
11、for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-01507 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43218-3990 REVISION LEVEL A SHEET 3 DSCC FORM 2234 APR 97 1.3 Absolute maximum ratings. 1/ Supply voltage range (VCC) . -0.5 V
12、to +7.0 V DC voltage applied to outputs for high output state -0.5 V to VCCmax DC input voltage range (VIN) . -0.5 V to +5.5 V DC output voltage range (VOUT) -0.5 V to +5.5 V DC output current (IOUT) 30 mA DC input current (IIN) . -30 mA to +5.0 mA Storage temperature range (TS) -65C to +150C Juncti
13、on temperature range (JC) . See MIL-STD-1835 1.4 Recommended operating conditions. Supply voltage range (VCC) . +4.5 V to +5.5 V Operating temperature range (TA) -55C to +125C Minimum high level input voltage (VIH) 2.0 V dc Maximum low level input voltage (VIL) . 0.8 V dc 2. APPLICABLE DOCUMENTS 2.1
14、 Government specification, standards, and handbooks. The following specification, standards, and handbooks form a part of this drawing to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract. DEPARTMENT OF DEFENSE SPEC
15、IFICATION MIL-PRF-38535 - Integrated Circuits, Manufacturing, General Specification for. DEPARTMENT OF DEFENSE STANDARDS MIL-STD-883 - Test Method Standard Microcircuits. MIL-STD-1835 - Interface Standard Electronic Component Case Outlines. DEPARTMENT OF DEFENSE HANDBOOKS MIL-HDBK-103 - List of Stan
16、dard Microcircuit Drawings. MIL-HDBK-780 - Standard Microcircuit Drawings. (Copies of these documents are available online at http:/assist.daps.dla.mil/quicksearch/ or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.) 2.2 Order of precedence
17、. In the event of a conflict between the text of this drawing and the references cited herein, the text of this drawing takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained. _ 1/ Stresses above the absolute maxi
18、mum rating may cause permanent damage to the device. Extended operation at the maximum levels may degrade performance and affect reliability. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-01507 DEFENSE SUPP
19、LY CENTER COLUMBUS COLUMBUS, OHIO 43218-3990 REVISION LEVEL A SHEET 4 DSCC FORM 2234 APR 97 3. REQUIREMENTS 3.1 Item requirements. The individual item requirements for device classes Q and V shall be in accordance with MIL-PRF-38535 and as specified herein or as modified in the device manufacturers
20、Quality Management (QM) plan. The modification in the QM plan shall not affect the form, fit, or function as described herein. The individual item requirements for device class M shall be in accordance with MIL-PRF-38535, appendix A for non-JAN class level B devices and as specified herein. 3.2 Desi
21、gn, construction, and physical dimensions. The design, construction, and physical dimensions shall be as specified in MIL-PRF-38535 and herein for device classes Q and V or MIL-PRF-38535, appendix A and herein for device class M. 3.2.1 Case outlines. The case outlines shall be in accordance with 1.2
22、.4 herein. 3.2.2 Terminal connections. The terminal connections shall be as specified on figure 1. 3.2.3 Truth table. The truth table shall be as specified on figure 2. 3.2.4 Logic diagram. The logic diagram shall be as specified on figure 3. 3.2.5 Test circuit and waveforms. The test circuit and wa
23、veforms shall be as specified on figure 4. 3.3 Electrical performance characteristics and postirradiation parameter limits. Unless otherwise specified herein, the electrical performance characteristics and postirradiation parameter limits are as specified in table I and shall apply over the full amb
24、ient operating temperature range. 3.4 Electrical test requirements. The electrical test requirements shall be the subgroups specified in table II. The electrical tests for each subgroup are defined in table I. 3.5 Marking. The part shall be marked with the PIN listed in 1.2 herein. In addition, the
25、manufacturers PIN may also be marked. For packages where marking of the entire SMD PIN is not feasible due to space limitations, the manufacturer has the option of not marking the “5962-“ on the device. For RHA product using this option, the RHA designator shall still be marked. Marking for device c
26、lasses Q and V shall be in accordance with MIL-PRF-38535. Marking for device class M shall be in accordance with MIL-PRF-38535, appendix A. 3.5.1 Certification/compliance mark. The certification mark for device classes Q and V shall be a “QML“ or “Q“ as required in MIL-PRF-38535. The compliance mark
27、 for device class M shall be a “C“ as required in MIL-PRF-38535, appendix A. 3.6 Certificate of compliance. For device classes Q and V, a certificate of compliance shall be required from a QML-38535 listed manufacturer in order to supply to the requirements of this drawing (see 6.6.1 herein). For de
28、vice class M, a certificate of compliance shall be required from a manufacturer in order to be listed as an approved source of supply in MIL-HDBK-103 (see 6.6.2 herein). The certificate of compliance submitted to DSCC-VA prior to listing as an approved source of supply for this drawing shall affirm
29、that the manufacturers product meets, for device classes Q and V, the requirements of MIL-PRF-38535 and herein or for device class M, the requirements of MIL-PRF-38535, appendix A and herein. 3.7 Certificate of conformance. A certificate of conformance as required for device classes Q and V in MIL-P
30、RF-38535 or for device class M in MIL-PRF-38535, appendix A shall be provided with each lot of microcircuits delivered to this drawing. 3.8 Notification of change for device class M. For device class M, notification to DSCC-VA of change of product (see 6.2 herein) involving devices acquired to this
31、drawing is required for any change that affects this drawing. 3.9 Verification and review for device class M. For device class M, DSCC, DSCCs agent, and the acquiring activity retain the option to review the manufacturers facility and applicable required documentation. Offshore documentation shall b
32、e made available onshore at the option of the reviewer. 3.10 Microcircuit group assignment for device class M. Device class M devices covered by this drawing shall be in microcircuit group number 4 (see MIL-PRF-38535, appendix A). Provided by IHSNot for ResaleNo reproduction or networking permitted
33、without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-01507 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43218-3990 REVISION LEVEL A SHEET 5 DSCC FORM 2234 APR 97 TABLE I. Electrical performance characteristics. Test Symbol Conditions -55C TA+125C +4.5 V VCC +5.5 V Group A subgroup
34、s Limits Unit unless otherwise specified Min Max Output high voltage VOHVCC= 4.5 V, IOH= -1.0 mA, VIN= VIHor VIL1, 2, 3 2.5 V Output low voltage VOLVCC= 4.5 V, IOL= 20 mA, VIN= VIHor VIL1, 2, 3 0.5 V Input clamp voltage VIKVCC= 4.5 V, IIN= -18 mA 1, 2, 3 -1.2 V VCC= 5.5 V, Cn -2.0 3P -4.0 2P -6.0 0P
35、, 1P , 3G -8.0 0G, 2G -14.0 Input low current IILVIN= 0.5 V 1G 1, 2, 3 -16.0 mA Cn 50.0 3P 100.0 2P 150.0 0P, 1P , 3G 200.0 0G, 2G 350.0 IIH1VCC= 5.5 V, VIN= 2.7 V 1G 1, 2, 3 400.0 A Input high current IIH2 VCC= 5.5 V, VIN= 5.5 V 1, 2, 3 1.0 mA Output short circuit IOS1/ VCC= 5.5 V, VOUT= 0.0 V 1, 2
36、, 3 -40.0 -100.0 mA Supply current ICCVCC= 5.5 V, All outputs low 1, 2, 3 99.0 mA Functional tests See 4.4.1b 7, 8 See footnotes at end of table. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-01507 DEFENSE
37、SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43218-3990 REVISION LEVEL A SHEET 6 DSCC FORM 2234 APR 97 TABLE I. Electrical performance characteristics Continued. Limits Test Symbol Conditions -55C TA+125C +4.5 V VCC +5.5 V unless otherwise specified Group A subgroups Min Max Unit tPLH1 15.0 Propagation del
38、ay time, Cn to Cn + x, Cn + y or Cn + z tPHL1See figure 4 CL= 50 pF RL= 280 9, 10, 11 16.5 tPLH2 17.0 Propagation delay time, Pi or Gi to Cn + x, Cn + y or Cn + z tPHL2 9, 10, 11 15.0 tPLH3 17.0 Propagation delay time, Pi or Gi to G tPHL3 9, 10, 11 18.0 tPLH4 14.0 Propagation delay time, Pi to P tPH
39、L4 9, 10, 11 14.0 ns 1/ Not more than one output should be shorted at a time. Duration of the short circuit test should not exceed one second. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-01507 DEFENSE SUP
40、PLY CENTER COLUMBUS COLUMBUS, OHIO 43218-3990 REVISION LEVEL A SHEET 7 DSCC FORM 2234 APR 97 Device type 01 Case outlines E 2 Terminal number Terminal symbol 1 1G 1G 2 1P 1P 3 0G NC 4 0P 0G 5 3G 0P 6 3P 3G 7 P 3P 8 GND NC 9 Cn + z P 10 G GND 11 Cn + y Cn + z 12 Cn + X G 13 Cn NC 14 2G Cn + y 15 2P C
41、n + x 16 VCCCn17 2G 18 NC 19 2P 20 VCCNC = No connection Name I/O Description Cn I Carry-in. The carry-in input to the look-ahead generator. Also the carry-in input to the microprocessor ALU input. Cn + i O Carry-out. (i = x, y, z). The carry-out output to be used at the carry-in inputs of the n + 1
42、, n + 2, and n + 3 microprocessor ALU slices. Gi , Pi I Generate and propagate inputs respectively (i = 0, 1, 2, 3). The carry generate and carry propagate inputs from the n, n + 1, n + 2, and n + 3 microprocessor ALU slices. G, P O Generate and propagate outputs respectively. The carry generate and
43、 carry propagate outputs that can be used with the next higher level of carry look-ahead if used. FIGURE 1. Terminal connections. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-01507 DEFENSE SUPPLY CENTER CO
44、LUMBUS COLUMBUS, OHIO 43218-3990 REVISION LEVEL A SHEET 8 DSCC FORM 2234 APR 97 Inputs Outputs Cn 0G0P1G 1P 2G2P3G 3P Cn + x Cn + y Cn + z G P X H H L L H X L X L X H H X L H X X X H H L X H H H X L L H X H X L X X X L X H X L X X L H H X L X L H X X X X X H H L X X X H H H X L X H H H X H X L L H X
45、 H X H X L X X X X X L X H X X X L X X L H X L X X L X L H H X L X L X L H X X X X X H H H X X X H H H X H X H H H X H X H H H X H X H X H X X X X X L X L X X X L X X L L X L X X L X L L L X L X L X L L H X X X H X H X X H X X H X H X X X H H L L L L L H = High voltage level L = Low voltage level X
46、= Irrelevant FIGURE 2. Truth table. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-01507 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43218-3990 REVISION LEVEL A SHEET 9 DSCC FORM 2234 APR 97 FIGURE 3. Logi
47、c diagram. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-01507 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43218-3990 REVISION LEVEL A SHEET 10 DSCC FORM 2234 APR 97 FIGURE 4. Test circuit and waveforms.
48、Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-01507 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43218-3990 REVISION LEVEL A SHEET 11 DSCC FORM 2234 APR 97 4. VERIFICATION 4.1 Sampling and inspection. For device classes Q and V, sampling and inspection proced
copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
备案/许可证编号:苏ICP备17064731号-1