DLA SMD-5962-86017 REV D-2005 MICROCIRCUIT DIGITAL 4-BIT BIPOLAR STATUS AND SHIFT CONTROL UNIT MONOLITHIC SILICON《硅单块 4比特双极状态和移位控制 数字微型电路》.pdf

1、 REVISIONS LTR DESCRIPTION DATE (YR-MO-DA) APPROVED A Convert to military drawing. Changes to table I. Changes to figures 2 and 4. Editorial changes throughout. 87-04-14 N. A. Hauck B Changes to table I and figure 1 dimensions. 88-01-22 M. A. Frye C Update boilerplate to MIL-PRF-38535 requirements.

2、Add “QD” device criteria. Add vendor CAGE 3V146. Correct drawing title. - CFS 03-02-13 Thomas M. Hess D Correct marking requirements in 3.5. Update boilerplate in accordance with MIL-PRF-38535 requirements. Editorial changes throughout. - PHN. 05-04-11 Thomas M. Hess REV SHET REV C SHET 15 REV STATU

3、S REV D C D D C C C C C C C C C C OF SHEETS SHEET 1 2 3 4 5 6 7 8 9 10 11 12 13 14 PMIC N/A PREPARED BY Ray Monnin STANDARD MICROCIRCUIT DRAWING CHECKED BY D. A. Di Cenzo DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43218-3990 http:/www.dscc.dla.mil THIS DRAWING IS AVAILABLE FOR USE BY ALL DEPARTME

4、NTS APPROVED BY N. A. Hauck AND AGENCIES OF THE DEPARTMENT OF DEFENSE DRAWING APPROVAL DATE 86-04-04 MICROCIRCUIT, DIGITAL, 4-BIT BIPOLAR STATUS AND SHIFT CONTROL UNIT, MONOLITHIC SILICON SIZE A CAGE CODE 67268 86017 AMSC N/A REVISION LEVEL D SHEET 1 OF 15 DSCC FORM 2233 APR 97 5962-E244-05 Provided

5、 by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 86017 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43218-3990 REVISION LEVEL C SHEET 1 DSCC FORM 2234 APR 97 1. SCOPE 1.1 Scope. This drawing describes device requirements

6、for MIL-STD-883 compliant, non-JAN class level B microcircuits in accordance with MIL-PRF-38535, appendix A. 1.2 Part or Identifying Number (PIN). The complete PIN is as shown in the following example: 86017 01 Q X Drawing number Device type (see 1.2.1) Case outline(see 1.2.2) Lead finish(see 1.2.3)

7、1.2.1 Device type(s). The device type(s) identify the circuit function as follows: Device type Generic number Circuit function 01 2904 4-bit bipolar status and shift control unit 1.2.2 Case outline(s). The case outline(s) are as designated in MIL-STD-1835 and as follows: Outline letter Descriptive d

8、esignator Terminals Package style Q GDIP1-T40 or CDIP2-T40 40 Dual-in-line Y See figure 1 42 Flat pack 1.2.3 Lead finish. The lead finish is as specified in MIL-PRF-38535, appendix A. 1.3 Absolute maximum ratings. Supply voltage range -0.5 V dc to +7.0 V dc Input voltage range -0.5 V dc to +5.5 V dc

9、 Storage temperature range -65C to +150C Maximum power dissipation (PD) 1/. 1.914 W Lead temperature (soldering, 10 seconds). +300C Thermal resistance, junction-to-case (JC): Case Q . See MIL-STD-1835 Case Y 9C/W DC output current into inputs 30 mA DC input current. -30 mA to +5.0 mA Junction temper

10、ature (TJ). +175C 1.4 Recommended operating conditions. Supply voltage (VCC) +4.5 V dc to +5.5 V dc Minimum high-level input voltage (VIH). +2.0 V dc Maximum low-level input voltage (VIL) +0.8 V dc Case operating temperature range (TC) . -55C to +125C _ 1/ Must withstand the added PDdue to short cir

11、cuit test (e.g., IOS). Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 86017 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43218-3990 REVISION LEVEL D SHEET 2 DSCC FORM 2234 APR 97 2. APPLICABLE DOCUMENTS 2.1 Gove

12、rnment specification, standards, and handbooks. The following specification, standards, and handbooks form a part of this drawing to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract. DEPARTMENT OF DEFENSE SPECIFICA

13、TION MIL-PRF-38535 - Integrated Circuits, Manufacturing, General Specification for. DEPARTMENT OF DEFENSE STANDARDS MIL-STD-883 - Test Method Standard Microcircuits. MIL-STD-1835 - Interface Standard Electronic Component Case Outlines. DEPARTMENT OF DEFENSE HANDBOOKS MIL-HDBK-103 - List of Standard

14、Microcircuit Drawings. MIL-HDBK-780 - Standard Microcircuit Drawings. (Copies of these documents are available online at http:/assist.daps.dla.mil/quicksearch/ or http:/assist.daps.dla.mil or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.)

15、 2.2 Order of precedence. In the event of a conflict between the text of this drawing and the references cited herein, the text of this drawing takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained. 3. REQUIREMEN

16、TS 3.1 Item requirements. The individual item requirements shall be in accordance with MIL-PRF-38535, appendix A for non-JAN class level B devices and as specified herein. Product built to this drawing that is produced by a Qualified Manufacturer Listing (QML) certified and qualified manufacturer or

17、 a manufacturer who has been granted transitional certification to MIL-PRF-38535 may be processed as QML product in accordance with the manufacturers approved program plan and qualifying activity approval in accordance with MIL-PRF-38535. This QML flow as documented in the Quality Management (QM) pl

18、an may make modifications to the requirements herein. These modifications shall not affect form, fit, or function of the device. These modifications shall not affect the PIN as described herein. A “Q“ or “QML“ certification mark in accordance with MIL-PRF-38535 is required to identify when the QML f

19、low option is used. This drawing has been modified to allow the manufacturer to use the alternate die/fabrication requirements of paragraph A.3.2.2 of MIL-PRF-38535 or other alternative approved by the qualifying activity. 3.2 Design, construction, and physical dimensions. The design, construction,

20、and physical dimensions shall be as specified in MIL-PRF-38535, appendix A and herein. 3.2.1 Case outline(s). The case outline(s) shall be in accordance with 1.2.2 herein and figure 1. 3.2.2 Terminal connections. The terminal connections shall be as specified on figure 2. 3.2.3 Functional block diag

21、ram. The functional block diagram shall be as specified on figure 3. 3.2.4 Load circuits. The load circuits shall be as specified on figure 4. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 86017 DEFENSE SUPPLY C

22、ENTER COLUMBUS COLUMBUS, OHIO 43218-3990 REVISION LEVEL D SHEET 3 DSCC FORM 2234 APR 97 3.3 Electrical performance characteristics. Unless otherwise specified herein, the electrical performance characteristics are as specified in table I and shall apply over the full case operating temperature range

23、. 3.4 Electrical test requirements. The electrical test requirements shall be the subgroups specified in table II. The electrical tests for each subgroup are described in table I. 3.5 Marking. Marking shall be in accordance with MIL-PRF-38535, appendix A. The part shall be marked with the PIN listed

24、 in 1.2 herein. In addition, the manufacturers PIN may also be marked. 3.5.1 Certification/compliance mark. A compliance indicator “C” shall be marked on all non-JAN devices built in compliance to MIL-PRF-38535, appendix A. The compliance indicator “C” shall be replaced with a “Q“ or “QML“ certifica

25、tion mark in accordance with MIL-PRF-38535 to identify when the QML flow option is used. For product built in accordance with A.3.2.2 of MIL-PRF-38535, or as modified in the manufacturers QM plan, the “QD” certification mark shall be used in place of the “Q“ or “QML“ certification mark. 3.6 Certific

26、ate of compliance. A certificate of compliance shall be required from a manufacturer in order to be listed as an approved source of supply in MIL-HDBK-103 (see 6.6 herein). The certificate of compliance submitted to DSCC-VA prior to listing as an approved source of supply shall affirm that the manuf

27、acturers product meets the requirements of MIL-PRF-38535, appendix A and the requirements herein. 3.7 Certificate of conformance. A certificate of conformance as required in MIL-PRF-38535, appendix A shall be provided with each lot of microcircuits delivered to this drawing. 3.8 Notification of chan

28、ge. Notification of change to DSCC-VA shall be required for any change that affects this drawing. 3.9 Verification and review. DSCC, DSCCs agent, and the acquiring activity retain the option to review the manufacturers facility and applicable required documentation. Offshore documentation shall be m

29、ade available onshore at the option of the reviewer. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 86017 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43218-3990 REVISION LEVEL C SHEET 4 DSCC FORM 2234 APR 97 TA

30、BLE I. Electrical performance characteristics. Test Symbol Group A subgroups Device type Limits Unit Conditions -55C TC +125C +4.5 V VCC +5.5 V unless otherwise specified Min Max IOH= -1.6 mA YZ, YC, YN, YOVR2.4 Output high voltage VOHVCC= 4.5 V, VIN= VIHor VILIOH= -0.8 mA SIOo, SIOn, QIOo, QIOn, CT

31、, CO2.4 V IOL= 16 mA YZ, YC, YN, YOVR0.5 Output low voltage VOLVCC= 4.5 V, VIN= VIHor VILIOL= 8 mA SIOo, SIOn, QIOo, QIOn, CT, CO0.5 V Input high voltage VIH1/ 2.0 V Input low voltage VIL1/ 0.8 Input clamp voltage VICVCC= 4.5 V, IIN= -18 mA -1.5 V CP -0.7 CEm, CE-1.8 IZ, IC, IN, IOVR-1.2 I0-I12, EZ,

32、 EC, EN, EOVR, OEY, OECT, CX, YZ, YC, YN, YOVR-0.45 Input low current IILVCC= 5.5 V, VIN= 0.5 V SE, SIOo, SIOn, QIOo, QIOn-1.35 mA CP, I0-I12, EZ, EC, EN, EOVR, OEY, OECT, CX20 CEm, CE80 IZ, IC, IN, IOVR, SE 60 SIOo, SIOn, QIOo, QIOn110 Input high current IIH1VCC= 5.5 V, VIN= 2.7 V YZ, YC, YN, YOVR7

33、0 A Input high current IIH2VCC= 5.5 V, VIN= 5.5 V 1.0 mA VO= 2.4 V 50 CT VO= 0.5 V -50 VO= 2.4 V 110 SIOo, SIOn, QIOo, QIOn2/ VO= 0.5 V -1350 VO= 2.4 V 70 Off-state (high impedance) output current IOZH, IOZLVCC= 5.5 V YZ, YC, YN, YOVR2/ VO= 0.5 V -450 A Output short circuit current 3/ IOSVCC= 5.75 V

34、, VO= 0.5 V 1, 2, 3 01 -30 -85 mA See footnotes at end of table. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 86017 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43218-3990 REVISION LEVEL C SHEET 5 DSCC FORM 22

35、34 APR 97 TABLE I. Electrical performance characteristics - Continued. Test Symbol Conditions -55C TC +125C +4.5 V VCC +5.5 V unless otherwise specified Group A subgroups Device type Limits Unit Min Max TC= -55C to +125C 1, 2, 3 348 Power supply current 4/ ICCVCC= 5.5 V TC= +125C 2 222 mA Setup time

36、 1 ts115 ns Hold time 1 th1CL= 50 pF, see figure 4 Inputs: IZ, IIN, IOVR5 ns Setup time 2 ts228 ns Hold time 2 th2CL= 50 pF, see figure 4 Inputs: IC(I1, I2, I3= 001) 5 ns Setup time 3 ts315 ns Hold time 3 th3CL= 50 pF, see figure 4 Inputs: IC(I1, I2, I3 001) 5 ns Setup time 4 ts420 ns Hold time 4 th

37、4CL= 50 pF, see figure 4 Inputs: CE3 ns Setup time 5 ts523 ns Hold time 5 th5CL= 50 pF, see figure 4 Inputs: CEm4 ns Setup time 6 ts623 ns Hold time 6 th6CL= 50 pF, see figure 4 Inputs: EZ, EC, EN, EOVR4 ns Setup time 7 ts748 ns Hold time 7 th7CL= 50 pF, see figure 4 Inputs: I0 I52 ns Setup time 8 t

38、s844 ns Hold time 8 th8CL= 50 pF, see figure 4 Inputs: I6 I102 ns Setup time 9 ts940 ns Hold time 9 th9CL= 50 pF, see figure 4 Inputs: SE 0 ns Setup time 10 ts1016 ns Hold time 10 th10CL= 50 pF, see figure 4 Inputs: YZ, YC, YN, YOVR, I0 5= LOW 6 ns Setup time 11 ts1120 ns Hold time 11 th11CL= 50 pF,

39、 see figure 4 Inputs: SIOo, SIOn, QIOo, QIOn5 ns Propagation delay 1: From (input): IZ, IC, IN, IOVRTo (output): YZ, YC, YN, YOVRtpd140 ns Propagation delay 2: From (input): CP To (output): YZ, YC, YN, YOVRtpd245 ns Propagation delay 3: From (input): I4, I5To (output): YZ, YC, YN, YOVRtpd3CL= 50 pF,

40、 see figure 4 9, 10, 11 01 38 ns See footnotes at end of table. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 86017 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43218-3990 REVISION LEVEL C SHEET 6 DSCC FORM 223

41、4 APR 97 TABLE I. Electrical performance characteristics - Continued. Test Symbol Conditions -55C TC +125C +4.5 V VCC +5.5 V unless otherwise specified Group A subgroups Device type Limits Unit Min Max Propagation delay 4: From (input): IZ, IC, IN, IOVRTo (output): CT tpd444 ns Propagation delay 5:

42、From (input): CP To (output): CT tpd540 ns Propagation delay 6: From (input): I0- I5To (output): CT tpd641 ns Propagation delay 7: From (input): CXTo (output): COtpd722 ns Propagation delay 8: From (input): CP To (output): COtpd828 ns Propagation delay 9: From (input): I1, I2, I3, I5, I11, I12To (ou

43、tput): COtpd942 ns Propagation delay 10: From (input): SIOn, QIOnTo (output): SIOotpd1020 ns Propagation delay 11: From (input): SIOo, QIOoTo (output): SIOntpd1120 ns Propagation delay 12: From (input): IC, IN, IOVRTo (output): SIOotpd12CL= 50 pF, see figure 4 9, 10, 11 01 29 ns See footnotes at end

44、 of table. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 86017 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43218-3990 REVISION LEVEL C SHEET 7 DSCC FORM 2234 APR 97 TABLE I. Electrical performance characterist

45、ics - Continued. Test Symbol Conditions -55C TC +125C +4.5 V VCC +5.5 V unless otherwise specified Group A subgroups Device type Limits Unit Min Max Propagation delay 13: From (input): SIOn, QIOnTo (output): QIOotpd1320 ns Propagation delay 14: From (input): SIOo, QIOoTo (output): QIOntpd1420 ns Pro

46、pagation delay 15: From (input): CP To (output): SIOo, SIOn, QIOo, QIOntpd1532 ns Propagation delay 16: From (input): I6 I10To (output): SIOo, SIOn, QIOo, QIOntpd1631 ns Enable time 1: From (input): OECTTo (output): CT tEN1CL= 50 pF, see figure 4 25 ns Disable time 1: From (input): OECTTo (output):

47、CT tDIS1CL= 5 pF, see figure 4 18 ns Enable time 2: From (input): SE To (output): SIOo, SIOn, QIOo, QIOntEN2CL= 50 pF, see figure 4 35 ns Disable time 2: From (input): SE To (output): SIOo, SIOn, QIOo, QIOntDIS2CL= 5 pF, see figure 4 9, 10, 11 01 20 ns See footnotes at end of table. Provided by IHSN

48、ot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 86017 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43218-3990 REVISION LEVEL C SHEET 8 DSCC FORM 2234 APR 97 TABLE I. Electrical performance characteristics - Continued. Test Symbol Conditions -55C TC +125C +4.5 V VCC +5.5 V unless otherwise specified Group A subgroups Device type Limits Unit Min Max Enable time 3: From (input): I10To (output): SIOo, SIOn, QIOo, QIOntEN3CL= 50 pF, see figure 4 43 ns Disable time 3: From (input): I10T