DLA SMD-5962-87755 REV C-2011 MICROCIRCUIT DIGITAL BIPOLAR BUFFERED REGISTERS MONOLITHIC SILICON.pdf

1、 REVISIONS LTR DESCRIPTION DATE (YR-MO-DA) APPROVED A Add vendor cage 0DKS7. Add device types 07, 08, and 09. Update boilerplate to MIL-PRF-38535 requirements. Editorial changes throughout jak. 01-03-05 Thomas M. Hess B Update to reflect latest changes in format and requirements. Editorial changes t

2、hroughout. les 05-06-30 Raymond Monnin C Update drawing as part of 5 year review. - jt 11-09-12 C. SAFFLE REV SHEET REV C C C C SHEET 15 16 17 18 REV STATUS REV C C C C C C C C C C C C C C OF SHEETS SHEET 1 2 3 4 5 6 7 8 9 10 11 12 13 14 PMIC N/A PREPARED BY Christopher A. Rauch DLA LAND AND MARITIM

3、E COLUMBUS, OHIO 43218-3990 http:/www.landandmaritime.dla.mil STANDARD MICROCIRCUIT DRAWING THIS DRAWING IS AVAILABLE FOR USE BY ALL DEPARTMENTS AND AGENCIES OF THE DEPARTMENT OF DEFENSE CHECKED BY D. A. DiCenzo APPROVED BY Robert P. Evans MICROCIRCUIT, DIGITAL, BIPOLAR, BUFFERED REGISTERS, MONOLITH

4、IC SILICON DRAWING APPROVAL DATE 88-01-19 AMSC N/A REVISION LEVEL C SIZE A CAGE CODE 67268 5962-87755 SHEET 1 OF 18 DSCC FORM 2233 APR 97 5962-E497-11 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-87755 DLA

5、 LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL C SHEET 2 DSCC FORM 2234 APR 97 1. SCOPE 1.1 Scope. This drawing documents two product assurance class levels consisting of high reliability (device classes Q and M) and space application (device class V). A choice of case outlines and lead

6、 finishes are available and are reflected in the Part or Identifying Number (PIN). When available, a choice of Radiation Hardness Assurance (RHA) levels is reflected in the PIN. 1.2 PIN. The PIN is as shown in the following examples. For devices 01- 06: 5962 - 87755 01 L X Federal stock class design

7、ator RHA designator (see 1.2.1) Device type (see 1.2.2) Case outline (see 1.2.4) Lead finish (see 1.2.5) / / Drawing number For devices 07-09: 5962 - 87755 07 Q L X Federal stock class designator RHA designator (see 1.2.1) Device type (see 1.2.2) Device class designator Case outline (see 1.2.4) Lead

8、 finish (see 1.2.5) / (see 1.2.3) / Drawing number 1.2.1 RHA designator. Device classes Q and V RHA marked devices meet the MIL-PRF-38535 specified RHA levels and are marked with the appropriate RHA designator. Device class M RHA marked devices meet the MIL-PRF-38535, appendix A specified RHA levels

9、 and are marked with the appropriate RHA designator. A dash (-) indicates a non-RHA device. 1.2.2 Device type(s). The device type(s) identify the circuit function as follows: Device type Generic number Circuit function 01 29821A 10-wide buffered register 02 29823A 9-wide buffered register 03 29825A

10、8-wide buffered register 04 29921A 10-wide buffered register with rotated die 05 29923A 9-wide buffered register with rotated die 06 29925A 8-wide buffered register with rotated die 07 29823A 9-wide buffered register 08 29825A 8-wide buffered register 09 29921A 10-wide buffered register with rotated

11、 die Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-87755 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL C SHEET 3 DSCC FORM 2234 APR 97 1.2.3 Device class designator. The device class design

12、ator is a single letter identifying the product assurance level as listed below. Since the device class designator has been added after the original issuance of this drawing, device classes M and Q designators will not be included in the PIN and will not be marked on the device. Device class Device

13、requirements documentation M Vendor self-certification to the requirements for MIL-STD-883 compliant, non-JAN class level B microcircuits in accordance with MIL-PRF-38535, appendix A Q or V Certification and qualification to MIL-PRF-38535 1.2.4 Case outlines. The case outlines are as designated in M

14、IL-STD-1835 and as follows: Outline letter Descriptive designator Terminals Package style K GDFP2-F24 or CDFP3-F24 24 flat L GDIP3-T24 or CDIP4-T24 24 dual-in-line 3 CQCC1-N28 28 leadless chip carrier 1.2.5 Lead finish. The lead finish is as specified in MIL-PRF-38535 for device classes Q and V or M

15、IL-PRF-38535, appendix A for device class M. 1.3 Absolute maximum ratings. 1/ Supply voltage (vcc) . -0.5 V dc to +7.0 V dc DC input voltage range (vin) -1.5 V dc to +6.0 V dc DC output voltage range (VOUT) -0.5 V dc to +5.5 V dc DC output current into output +100 mA DC output current out of output

16、. -50 mA DC input current into input -30 mA to +5.0 mA Storage temperature range (TSTG) . -65C to +150C Maximum power dissipation (PD) 2/ 2.0 W Lead temperature (soldering, 10 seconds) . +300C Thermal resistance, junction-to-case (JC) . See MIL-STD-1835 Junction temperature (TJ) +150C 1.4 Recommende

17、d operating conditions. Supply voltage range (VEE) . +4.5 V dc minimum to +5.5 V dc maximum Minimum high level input voltage (VIH): Device types 01, 02, 03, 04, 05, 06, 07, 08, 09 +2.0 V dc Device type 08 for CLR input -2.4 V dc 3/ Maximum low level input voltage (VIL) +0.8 V dc Case temperature ran

18、ge (TC) -55C to +125C _ 1/ Stresses above the absolute maximum rating may cause permanent damage to the device. Extended operation at the maximum levels may degrade performance and affect reliability. 2/ Maximum power dissipation is defined as VCC x ICC, and must withstand the added PD due to short

19、circuit test; e.g., IO 3/ Due to internal noise problems, device type 08 cannot meet the threshold limits required in accordance with MIL-STD-883, test method 5004, for the VIH minimum limit (2.0 V) of this technology family. For device type 09, use a VIH limit of 2.4 V for the input pin. The VIL li

20、mit (0.8 V) remains unchanged. use a VIHlimit of 2.4 V for the CLR input pin. The VILlimit (0.8 V) remains unchanged. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-87755 DLA LAND AND MARITIME COLUMBUS, OHIO

21、 43218-3990 REVISION LEVEL C SHEET 4 DSCC FORM 2234 APR 97 2. APPLICABLE DOCUMENTS 2.1 Government specification, standards, and handbooks. The following specification, standards, and handbooks form a part of this drawing to the extent specified herein. Unless otherwise specified, the issues of these

22、 documents are those cited in the solicitation or contract. DEPARTMENT OF DEFENSE SPECIFICATION MIL-PRF-38535 - Integrated Circuits, Manufacturing, General Specification for. DEPARTMENT OF DEFENSE STANDARDS MIL-STD-883 - Test Method Standard Microcircuits. MIL-STD-1835 - Interface Standard Electroni

23、c Component Case Outlines. DEPARTMENT OF DEFENSE HANDBOOKS MIL-HDBK-103 - List of Standard Microcircuit Drawings. MIL-HDBK-780 - Standard Microcircuit Drawings. (Copies of these documents are available online at https:/assist.daps.dla.mil/quicksearch/ or from the Standardization Document Order Desk,

24、 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.) 2.2 Order of precedence. In the event of a conflict between the text of this drawing and the references cited herein, the text of this drawing takes precedence. Nothing in this document, however, supersedes applicable laws and regulatio

25、ns unless a specific exemption has been obtained. 3. REQUIREMENTS 3.1 Item requirements. The individual item requirements for device classes Q and V shall be in accordance with MIL-PRF-38535 and as specified herein or as modified in the device manufacturers Quality Management (QM) plan. The modifica

26、tion in the QM plan shall not affect the form, fit, or function as described herein. The individual item requirements for device class M shall be in accordance with MIL-PRF-38535, appendix A for non-JAN class level B devices and as specified herein. 3.2 Design, construction, and physical dimensions.

27、 The design, construction, and physical dimensions shall be as specified in MIL-PRF-38535 and herein for device classes Q and V or MIL-PRF-38535, appendix A and herein for device class M. 3.2.1 Case outlines. The case outlines shall be in accordance with 1.2.4 herein. 3.2.2 Terminal connections. The

28、 terminal connections shall be as specified on figure 1. 3.2.3 Truth table. The truth table shall be as specified on figure 2. 3.2.4 logic diagrams. The logic diagrams shall be as specified on figure 3. 3.2.5 Test circuit and switching waveforms. Test circuit and switching waveforms shall be as spec

29、ified on figure 4. 3.3 Electrical performance characteristics and postirradiation parameter limits. Unless otherwise specified herein, the electrical performance characteristics and postirradiation parameter limits are as specified in table I and shall apply over the full case operating temperature

30、range. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-87755 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL C SHEET 5 DSCC FORM 2234 APR 97 3.4 Electrical test requirements. The electrical tes

31、t requirements shall be the subgroups specified in table II. The electrical tests for each subgroup are defined in table I. 3.5 Marking. The part shall be marked with the PIN listed in 1.2 herein. In addition, the manufacturers PIN may also be marked. For packages where marking of the entire SMD PIN

32、 number is not feasible due to space limitations, the manufacturer has the option of not marking the “5962-“ on the device. For RHA product using this option, the RHA designator shall still be marked. Marking for device classes Q and V shall be in accordance with MIL-PRF-38535. Marking for device cl

33、ass M shall be in accordance with MIL-PRF-38535, appendix A. 3.5.1 Certification/compliance mark. The certification mark for device classes Q and V shall be a “QML“ or “Q“ as required in MIL-PRF-38535. The compliance mark for device class M shall be a “C“ as required in MIL-PRF-38535, appendix A. 3.

34、6 Certificate of compliance. For device classes Q and V, a certificate of compliance shall be required from a QML-38535 listed manufacturer in order to supply to the requirements of this drawing (see 6.6.1 herein). For device class M, a certificate of compliance shall be required from a manufacturer

35、 in order to be listed as an approved source of supply in MIL-HDBK-103 (see 6.6.2 herein). The certificate of compliance submitted to DLA Land and Maritime-VA prior to listing as an approved source of supply for this drawing shall affirm that the manufacturers product meets, for device classes Q and

36、 V, the requirements of MIL-PRF-38535 and herein or for device class M, the requirements of MIL-PRF-38535, appendix A and herein. 3.7 Certificate of conformance. A certificate of conformance as required for device classes Q and V in MIL-PRF-38535 or for device class M in MIL-PRF-38535, appendix A sh

37、all be provided with each lot of microcircuits delivered to this drawing. 3.8 Notification of change for device class M. For device class M, notification to DLA Land and Maritime-VA of change of product (see 6.2 herein) involving devices acquired to this drawing is required for any change that affec

38、ts this drawing. 3.9 Verification and review for device class M. For device class M, DLA Land and Maritime, DLA Land and Maritime s agent, and the acquiring activity retain the option to review the manufacturers facility and applicable required documentation. Offshore documentation shall be made ava

39、ilable onshore at the option of the reviewer. 3.10 Microcircuit group assignment for device class M. Device class M devices covered by this drawing shall be in microcircuit group number 5 (see MIL-PRF-38535, appendix A). Provided by IHSNot for ResaleNo reproduction or networking permitted without li

40、cense from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-87755 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL C SHEET 6 DSCC FORM 2234 APR 97 TABLE I. Electrical performance characteristics. Test Symbol Conditions -55C TC +125C +4.5 V VCC +5.5 V Group A subgroups Device type Limi

41、ts Unit unless otherwise specified Min Max High level output voltage VOHVCC= 4.5 V, IOH= -15 mA 1, 2, 3 All 2.4 V VIL= 0.8 V, IOH= -24 mA 2.0 Low level output voltage VOLVIH= 2.0 V IOL= 32.0 mA 1, 2, 3 All 0.5 V Input clamp voltage VI CVCC= 4.5 V IIN= -18 mA 1, 2, 3 All -1.2 V Low level input curren

42、t IILVCC= 5.5 V VIN= 0.4 V 1, 2, 3 All -0.5 mA High level input current IIH1VCC= 5.5 V, VIN= 2.7 V 1, 2, 3 All 20 A IIH2VIN= 5.5 V 100 Offstate output current IOZHVCC= 5.5 V VOUT= 2.7 V 1, 2, 3 All 50 A IOZL VOUT= 0.4 V -50 Short circuit output current IOSVCC= 5.5 V 1/ VOUT= 0.0 V 1, 2, 3 All -75 -2

43、50 mA Bus leakage current IOFFVCC= 0.0 V VOUT= 2.9 V 1, 2, 3 All 100 A Supply current ICCVCC= 5.5 V, Outputs open, Outputs logic low 1, 2, 3 01, 02, 04, 05, 07, 09 100 mA 03, 06, 08 94 VIL= 0.8 V, Outputs logic high 01, 02, 04, 05, 07, 09 88 VIH= 2.0 V 03, 06, 08 84 Outputs logic 01, 04, 09 97 three

44、-state 02, 05, 07 96 03, 06, 08 92 Functional tests See 4.3.1c, VCC= 4.5 V, 5.5 V 7, 8 All L H Propagation delay time, from CLK to Yi tPLH1VCC= 5.0 V, 9, 10, 11 01, 02, 03, 04, 05, 06 3.5 9.0 ns CL= 50 pF 10%, 07 3.5 22.0 R1= 500 5%, 08 3.5 24.0 R2= 500 5%, 09 3.5 14.0 tPHL1See figure 4 9, 10, 11 01

45、, 02, 03, 04, 05, 06 3.5 11.5 ns 07 3.5 27.0 08 3.5 21.0 09 3.5 16.0 See footnotes at end of table. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-87755 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISI

46、ON LEVEL C SHEET 7 DSCC FORM 2234 APR 97 TABLE I. Electrical performance characteristics - Continued. Test Symbol Conditions -55C TC +125C +4.5 V VCC +5.5 V Group A subgroups Device type Limits Unit unless otherwise specified Min Max Propagation delay time, CLR to Yi tPHL2VCC= 5.0 V, CL= 50 pF 10%,

47、9, 10, 11 02, 03, 05, 06, 07, 08 15.0 ns Output enable time, OE to Yi tPZHR1= 500 5%, 9, 10, 11 01, 02, 03, 04, 05, 06 12.0 ns R2= 500 5%, 07 17.0 See figure 4 08 19.0 09 14.0 tPZL9, 10, 11 01, 02, 03, 04, 05, 06 13.0 ns 07 14.0 08 17.0 09 13.0 Output disable time, OE to Yi tPHZ9, 10, 11 01, 02, 03,

48、 04, 05, 06 9.0 07 18.0 08 20.0 09 13.0 tPLZ9, 10, 11 01, 02, 03, 04, 05, 06 9.0 07 18.0 08 20.0 09 13.0 Clock pulse width tPWH1, 9, 10, 11 All 8 ns tPWL1Data Di to CP setup time ts19, 10, 11 All 5 ns Data Di to CP hold time th19, 11 All 2 ns 10 3 See footnotes at end of table. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-87755 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-