DLA SMD-5962-89528 REV C-2011 MICROCIRCUIT HYBRID LINEAR 12-BIT DIGITAL TO ANALOG CONVERTER.pdf

1、 REVISIONS LTR DESCRIPTION DATE (YR-MO-DA) APPROVED A Table I, PSRR, change maximum limit from 0.004%FSR/%VS to 0.006%FSR/%VS. Table I, tests: LE, DLE, UOE, BOE, VERR, FTE, IOUT, and PSRR, change subgroups 1, 2, 3, to 4, 5, 6. Table I, IREFand SL, change subgroups 1 and 4 to 7 and 9 respectively. Ch

2、ange figure 1 case outline dimensioning to symbols and table format. Update drawing boilerplate. 02-07-22 Raymond Monnin B Update drawing. -gz 08-01-15 Robert M. Heber C Added footnote 3 to table I. Table I; Added footnote 3 indicator to the Reference current, Slew rate, and Settling time tests and

3、removed footnote 2 from the Slew rate and Settling time tests Update drawing paragraphs. -sld 11-08-16 Charles F. Saffle THE ORIGINAL FIRST SHEET OF THIS DRAWING HAS BEEN REPLACED. REV SHEET REV SHEET REV STATUS REV C C C C C C C C C C C C OF SHEETS SHEET 1 2 3 4 5 6 7 8 9 10 11 12 PMIC N/A PREPARED

4、 BY Donald R. Osborne DLA LAND AND MARITIME COLUMBUS, OHIO 43128-3990 http:/www.landandmaritime.dla.mil STANDARD MICROCIRCUIT DRAWING CHECKED BY Robert M. Heber THIS DRAWING IS AVAILABLE FOR USE BY ALL DEPARTMENTS APPROVED BY William K. Heckman MICROCIRCUIT, HYBRID, LINEAR, 12-BIT, DIGITAL TO ANALOG

5、 CONVERTER AND AGENCIES OF THE DEPARTMENT OF DEFENSE DRAWING APPROVAL DATE 90-02-28 AMSC N/A REVISION LEVEL C SIZE A CAGE CODE 67268 5962-89528 SHEET 1 OF 12 DSCC FORM 2233 APR 97 5962-E463-11 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD

6、MICROCIRCUIT DRAWING SIZE A 5962-89528 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL C SHEET 2 DSCC FORM 2234 APR 97 1. SCOPE 1.1 Scope. This drawing describes device requirements for class H hybrid microcircuits to be processed in accordance with MIL-PRF-38534 and a choice of case

7、outlines and lead finishes are available and are reflected in the Part or Identifying Number (PIN). 1.2 PIN. The PIN shall be as shown in the following example: 5962-89528 01 X X Drawing number Device type Case outline Lead finish (see 1.2.1) (see 1.2.2) (see 1.2.3) 1.2.1 Device type(s). The device

8、type(s) identify the circuit function as follows: Device type Generic number Circuit function 01 DAC-HKB D/A converter, 12-bit binary input code 02 DAC-HKB-2 D/A converter, 12-bit twos compliment 1.2.2 Case outline(s). The case outline(s) are as designated in MIL-STD-1835 and as follows: Outline let

9、ter Descriptive designator Terminals Package style X See figure 1 24 Dual-in-line 1.2.3 Lead finish. The lead finish shall be as specified in MIL-PRF-38534. 1.3 Absolute maximum ratings. 1/ Positive supply voltage (VCC) . -0.3 V to +18 V dc Negative supply voltage (VEE) +0.3 V to -18 V dc Logic supp

10、ly voltage (VDD) . -0.3 V to +7 V dc Analog output voltage VSOutput current 20 mA Digital inputs +5.5 V dc Junction temperature (TJ) +175C Storage temperature -65C to +150C Lead temperature (soldering, 10 seconds) +300C Power dissipation (PD) . 1.35 W Thermal resistance: Junction-to-case (JC) . 12C/

11、W Junction-to-ambient (JA) 49C/W 1.4 Recommended operating conditions. Positive supply voltage range (VCC) . +14.5 V dc to +15.5 V dc Negative supply voltage range (VEE) . -14.5 V dc to -15.5 V dc Logic supply voltage range (VDD) . +4.5 V dc to +5.5 V dc Write pulse width . 50 ns minimum Data setup

12、time . 50 ns minimum Data hold time . 20 ns minimum Ambient operating temperature range (TA) -55C to +125C 1/ Stresses above the absolute maximum ratings may cause permanent damage to the device. Extended operation at the maximum levels may degrade performance and affect reliability. Provided by IHS

13、Not for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-89528 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL C SHEET 3 DSCC FORM 2234 APR 97 2. APPLICABLE DOCUMENTS 2.1 Government specification, standards, and handb

14、ooks. The following specification, standards, and handbooks form a part of this drawing to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract. DEPARTMENT OF DEFENSE SPECIFICATION MIL-PRF-38534 - Hybrid Microcircuits,

15、 General Specification for. DEPARTMENT OF DEFENSE STANDARDS MIL-STD-883 - Test Method Standard Microcircuits. MIL-STD-1835 - Interface Standard for Electronic Component Case Outlines. DEPARTMENT OF DEFENSE HANDBOOKS MIL-HDBK-103 - List of Standard Microcircuit Drawings. MIL-HDBK-780 - Standard Micro

16、circuit Drawings. (Copies of these documents are available online at https:/assist.daps.dla.mil/quicksearch/ or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.) 2.2 Order of precedence. In the event of a conflict between the text of this dr

17、awing and the references cited herein, the text of this drawing takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained. 3. REQUIREMENTS 3.1 Item requirements. The individual item performance requirements for devic

18、e class H shall be in accordance with MIL-PRF-38534. Compliance with MIL-PRF-38534 may include the performance of all tests herein or as designated in the device manufacturers Quality Management (QM) plan or as designated for the applicable device class. The manufacturer may eliminate, modify or opt

19、imize the tests and inspections herein, however the performance requirements as defined in MIL-PRF-38534 shall be met for the applicable device class. In addition, the modification in the QM plan shall not affect the form, fit, or function of the device for the applicable device class. 3.2 Design, c

20、onstruction, and physical dimensions. The design, construction, and physical dimensions shall be as specified in MIL-PRF-38534 and herein. 3.2.1 Case outline(s). The case outline(s) shall be in accordance with 1.2.2 herein and figure 1. 3.2.2 Terminal connections. The terminal connections shall be a

21、s specified on figure 2. 3.2.3 Functional diagram. The functional diagram data shall be as specified on figure 3. 3.2.4 Truth tables. The truth tables data shall be as specified on figure 4. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MI

22、CROCIRCUIT DRAWING SIZE A 5962-89528 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL C SHEET 4 DSCC FORM 2234 APR 97 3.3 Electrical performance characteristics. Unless otherwise specified herein, the electrical performance characteristics are as specified in table I and shall apply ov

23、er the full specified operating temperature range. 3.4 Electrical test requirements. The electrical test requirements shall be the subgroups specified in table II. The electrical tests for each subgroup are defined in table I. 3.5 Marking of device(s). Marking of device(s) shall be in accordance wit

24、h MIL-PRF-38534. The device shall be marked with the PIN listed in 1.2 herein. In addition, the manufacturers vendor similar PIN may also be marked. 3.6 Data. In addition to the general performance requirements of MIL-PRF-38534, the manufacturer of the device described herein shall maintain the elec

25、trical test data (variables format) from the initial quality conformance inspection group A lot sample, for each device type listed herein. Also, the data should include a summary of all parameters manually tested, and for those which, if any, are guaranteed. This data shall be maintained under docu

26、ment revision level control by the manufacturer and be made available to the preparing activity (DLA Land and Maritime -VA) upon request. 3.7 Certificate of compliance. A certificate of compliance shall be required from a manufacturer in order to supply to this drawing. The certificate of compliance

27、 (original copy) submitted to DLA Land and Maritime -VA shall affirm that the manufacturers product meets the performance requirements of MIL-PRF-38534 and herein. 3.8 Certificate of conformance. A certificate of conformance as required in MIL-PRF-38534 shall be provided with each lot of microcircui

28、ts delivered to this drawing. 4. VERIFICATION 4.1 Sampling and inspection. Sampling and inspection procedures shall be in accordance with MIL-PRF-38534 or as modified in the device manufacturers Quality Management (QM) plan. The modification in the QM plan shall not affect the form, fit, or function

29、 as described herein. 4.2 Screening. Screening shall be in accordance with MIL-PRF-38534. The following additional criteria shall apply: a. Burn-in test, method 1015 of MIL-STD-883. (1) Test condition A, B, C, or D. The test circuit shall be maintained by the manufacturer under document revision lev

30、el control and shall be made available to either DLA Land and Maritime -VA or the acquiring activity upon request. Also, the test circuit shall specify the inputs, outputs, biases, and power dissipation, as applicable, in accordance with the intent specified in method 1015 of MIL-STD-883. (2) TAas s

31、pecified in accordance with table I of method 1015 of MIL-STD-883. b. Interim and final electrical test parameters shall be as specified in table II herein, except interim electrical parameter tests prior to burn-in are optional at the discretion of the manufacturer. Provided by IHSNot for ResaleNo

32、reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-89528 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL C SHEET 5 DSCC FORM 2234 APR 97 TABLE I. Electrical performance characteristics. Test Symbol Conditions 1/ -55C TA+125C unl

33、ess otherwise specified Group A subgroups Device type Limits Unit Min Max Resolution RES Binary input code 1, 2, 3 01 12 Bits Twos complement input code 02 12 Linearity error LE Major sums, carries 4 All 0.5 LSB 5, 6 0.75 Differential linearity error DLE Monotonic over temperature 4 All 0.75 LSB 5,

34、6 1.0 Gain error GE VO= +FS, +10 V and 10 V FSR 4 All 0.1 %FSR 5, 6 0.2 Unipolar offset error UOE VO= 0 V , 10 V range 4 All 0.05 %FSR 5, 6 0.1 Bipolar offset error BOE VO= -10 V, 10 V range 4 All 0.1 %FSR 5, 6 0.2 Reference error VERRVREF= -6.300 V 4 All 6.23 6.37 V 5, 6 6.218 6.382 Reference curre

35、nt 2/ 3/ IREFFor external use, TA= +25C 7 All 2 mA Slew rate 3/ SL 10 V step, TA= +25C 9 All 10 V/s Settling time 3/ tS20 V step to 0.01% FSR 10 V step to 0.01% FSR 5 V step to 0.01% FSR 1 LSB step to 0.01% FSR TA= +25C 9 All 4 3 3 800 s DC feedthrough error FTE Latch at +FS change 4, 5, 6 All 1 mV

36、Functional test See 4.3.1.c, TA= +25C 7 All See footnotes at end of table. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-89528 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL C SHEET 6 DSCC F

37、ORM 2234 APR 97 TABLE I. Electrical performance characteristics - Continued. Test Symbol Conditions 1/ -55C TA+125C unless otherwise specified Group A subgroups Device type Limits Unit Min Max Output current IOUT10 V FSR, RL= 1.9 k 4, 5, 6 All 5 mA Power supply rejection ratio PSRR Worst case, VS= 5

38、 V 4, 5, 6 All 0.006 %FSR/ %VS Power supply current ICCVCC= +15.5 V 1, 2, 3 All +17 mA IEEVEE= -15.5 V -25 IDDVDD= +5.5 V +50 Power dissipation PDVS= 15.5 V, +5.5 V 1, 2, 3 All 926 mW Digital input voltage high VIHIIH= -40 A 1, 2, 3 All 2.0 V Digital input voltage low VILIIL= +2.4 mA 1, 2, 3 All 0.8

39、 V Digital input current high IIHVIH= +2.0 V 1, 2, 3 All -40 A Digital input current low IILVIL= +0.8 V 1, 2, 3 All 2.4 mA Strobe input current high ISIHVSIH= 2.0 V 1, 2, 3 All -120 A Strobe input current low ISILVSIL= 0.8 V 1, 2, 3 All 4.8 mA 1/ Unless otherwise specified, the following conditions

40、apply: VCC= +15 V, VEE= -15 V, VDD= +5 V dc. Logic “0“ = +0.8 V dc, logic “1“ = 2.0 V dc. VFSR = 20 V Bipolar operation, no load applied, using internal reference. 2/ If more than 10 A is drawn externally, the reference temperature coefficient will increase resulting in a proportional change in the

41、gain and bipolar offset performance. 3/ Parameters shall be tested as part of device initial characterization and after design and process changes. Parameter shall be guaranteed to the limits specified in table I for all lots not specifically tested Provided by IHSNot for ResaleNo reproduction or ne

42、tworking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-89528 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL C SHEET 7 DSCC FORM 2234 APR 97 Case outline X. Symbol Millimeters Inches Min. Max. Min. Max. A - 5.99 - .236 A1 3.05 4.32 .120 .170 b 0.41 0

43、.56 .016 .022 b2 0.89 1.14 .035 .045 c 0.23 0.38 .009 .015 D 32.38 35.18 1.275 1.385 E 19.56 21.09 .770 .830 eA 14.99 15.49 .590 .610 e 2.54 BSC .100 BSC L 4.06 5.46 .160 .215 L1 4.70 6.35 .185 .250 Q 0.38 1.14 .015 .045 S1 2.16 3.18 .085 .125 NOTES: 1. The U.S. preferred system of measurement is th

44、e metric SI. This item was designed using inch-pound units of measurement. In case of problems involving conflicts between the metric and inch-pound units, the inch-pound units shall rule. 2. Pin numbers are for reference only. FIGURE 1. Case outline(s). Provided by IHSNot for ResaleNo reproduction

45、or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-89528 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL C SHEET 8 DSCC FORM 2234 APR 97 Device types All Case outline X Terminal number Terminal symbol Terminal number Terminal symbol 1 Bit 1

46、(MSB) 13 VDD 2 Bit 2 14 VEE 3 Bit 3 15 Output 4 Bit 4 16 Load 5 Bit 5 17 Bipolar offset 6 Bit 6 18 10 V range 7 Bit 7 19 20 V range 8 Bit 8 20 Sum junction 9 Bit 9 21 Ground 10 Bit 10 22 VCC 11 Bit 11 23 Gain 12 Bit 12 (LSB) 24 Reference output FIGURE 2. Terminal connections. Provided by IHSNot for

47、ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-89528 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL C SHEET 9 DSCC FORM 2234 APR 97 FIGURE 3. Functional diagram. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-89528 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL C SHEET 10 DSCC FORM 2234 APR 97 Bipolar operation Device type 01 Device type 02 Output ranges MSB LSB MSB LSB 10 V 5 V 2.5 V 1111 1111 1111 1