DLA SMD-5962-89543 REV C-2012 MICROCIRCUIT LINEAR JFET-INPUT OPERATIONAL AMPLIFIER MONOLITHIC SILICON.pdf

1、 REVISIONS LTR DESCRIPTION DATE (YR-MO-DA) APPROVED A Add device type 04 for device class V and radiation hardened requirements. Delete CAGE 64155. ro 00-03-16 R. MONNIN B Drawing updated to reflect current requirements. -rrp 05-01-20 R. MONNIN C Update drawing as part of the 5 year review. - jt 12-

2、10-01 C. SAFFLE REV SHEET REV SHEET REV STATUS REV C C C C C C C C C C C C OF SHEETS SHEET 1 2 3 4 5 6 7 8 9 10 11 12 PMIC N/A PREPARED BY RICK OFFICER DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 http:/www.landandmaritime.dla.mil STANDARD MICROCIRCUIT DRAWING THIS DRAWING IS AVAILABLE FOR USE BY

3、 ALL DEPARTMENTS AND AGENCIES OF THE DEPARTMENT OF DEFENSE CHECKED BY CHARLES E. BESORE APPROVED BY MICHAEL A. FRYE MICROCIRCUIT, LINEAR, JFET-INPUT, OPERATIONAL AMPLIFIER, MONOLITHIC SILICON DRAWING APPROVAL DATE 89-10-25 AMSC N/A REVISION LEVEL C SIZE A CAGE CODE 67268 5962-89543 SHEET 1 OF 12 DSC

4、C FORM 2233 APR 97 5962-E483-12 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-89543 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL C SHEET 2 DSCC FORM 2234 APR 97 1. SCOPE 1.1 Scope. This dr

5、awing documents two product assurance class levels consisting of high reliability (device classes Q and M) and space application (device class V). A choice of case outlines and lead finishes are available and are reflected in the Part or Identifying Number (PIN). When available, a choice of Radiatio

6、n Hardness Assurance (RHA) levels is reflected in the PIN. 1.2 PIN. The PIN is as shown in the following examples. For device classes M and Q: 5962 - 89543 01 G A Federal stock class designator RHA designator (see 1.2.1) Device type (see 1.2.2) Case outline (see 1.2.4) Lead finish (see 1.2.5) / / Dr

7、awing number For device class V: 5962 R 89543 04 V G A Federal stock class designator RHA designator (see 1.2.1) Device type (see 1.2.2) Device class designator Case outline (see 1.2.4) Lead finish (see 1.2.5) / (see 1.2.3) / Drawing number 1.2.1 RHA designator. Device classes Q and V RHA marked dev

8、ices meet the MIL-PRF-38535 specified RHA levels and are marked with the appropriate RHA designator. Device class M RHA marked devices meet the MIL-PRF-38535, appendix A specified RHA levels and are marked with the appropriate RHA designator. A dash (-) indicates a non-RHA device. 1.2.2 Device types

9、. The device types identify the circuit function as follows: Device type Generic number Circuit function 01 OP-16A JFET-input, operational amplifier 02 OP-16B JFET-input, operational amplifier 03 OP-16C JFET-input, operational amplifier 04 OP-16A JFET-input, operational amplifier with radiation hard

10、ened requirements 1.2.3 Device class designator. The device class designator is a single letter identifying the product assurance level as listed below. Since the device class designator has been added after the original issuance of this drawing, device classes M and Q designators will not be includ

11、ed in the PIN and will not be marked on the device. Device class Device requirements documentation M Vendor self-certification to the requirements for MIL-STD-883 compliant, non-JAN class level B microcircuits in accordance with MIL-PRF-38535, appendix A Q or V Certification and qualification to MIL

12、-PRF-38535 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-89543 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL C SHEET 3 DSCC FORM 2234 APR 97 1.2.4 Case outlines. The case outlines are as de

13、signated in MIL-STD-1835 and as follows: Outline letter Descriptive designator Terminals Package style G MACY1-X8 8 Can P GDIP1-T8 or CDIP2-T8 8 Dual-in-line 1.2.5 Lead finish. The lead finish is as specified in MIL-PRF-38535 for device classes Q and V or MIL-PRF-38535, appendix A for device class M

14、. 1.3 Absolute maximum ratings. 1/ Supply voltage range (VS): Devices 01, 02, and 04: Positive supply voltage (V+) +22 V dc Negative supply voltage (V-) . -22 V dc Device 03: Positive supply voltage (V+) +18 V dc Negative supply voltage (V-) . -18 V dc Differential input voltage: Devices 01, 02, and

15、 04 . 40 V dc Device 03 . 30 V dc Input voltage: Devices 01, 02, and 04 . 20 V dc Device 03 . 16 V dc Maximum power dissipation (PD) . 500 mW 2/ Output short circuit duration . Indefinite Storage temperature range -65C to +150C Lead temperature (soldering, 60 seconds) +300C Junction temperature (TJ)

16、 +150C Thermal resistance, junction-to-case (JC) See MIL-STD-1835 Thermal resistance, junction-to-ambient (JA): Case G . 150C/W Case P 119C/W 1.4 Recommended operating conditions. Supply voltage (VS) . 15 V Ambient operating temperature (TA) -55C to +125C 1.5 Radiation features. Maximum total dose a

17、vailable (dose rate = 50 300 rads(Si)/s) 100 krads 3/ 1/ Stresses above the absolute maximum rating may cause permanent damage to the device. Extended operation at the maximum levels may degrade performance and affect reliability. 2/ Derate linearly 6.7 mW/C above TA= +75C for P package; Derate line

18、arly 7.1 mW/C above TA= +80C for G package. 3/ These parts may be dose rate sensitive in a space environment and may demonstrate enhanced low dose rate effects. Radiation end point limits for the noted parameters are guaranteed only for the conditions specified in MIL-STD-883, method 1019, condition

19、 A. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-89543 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL C SHEET 4 DSCC FORM 2234 APR 97 2. APPLICABLE DOCUMENTS 2.1 Government specification, s

20、tandards, and handbooks. The following specification, standards, and handbooks form a part of this drawing to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract. DEPARTMENT OF DEFENSE SPECIFICATION MIL-PRF-38535 - In

21、tegrated Circuits, Manufacturing, General Specification for. DEPARTMENT OF DEFENSE STANDARDS MIL-STD-883 - Test Method Standard Microcircuits. MIL-STD-1835 - Interface Standard Electronic Component Case Outlines. DEPARTMENT OF DEFENSE HANDBOOKS MIL-HDBK-103 - List of Standard Microcircuit Drawings.

22、MIL-HDBK-780 - Standard Microcircuit Drawings. (Copies of these documents are available online at https:/assist.dla.mil/quicksearch/ or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.) 2.2 Order of precedence. In the event of a conflict bet

23、ween the text of this drawing and the references cited herein, the text of this drawing takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained. 3. REQUIREMENTS 3.1 Item requirements. The individual item requiremen

24、ts for device classes Q and V shall be in accordance with MIL-PRF-38535 and as specified herein or as modified in the device manufacturers Quality Management (QM) plan. The modification in the QM plan shall not affect the form, fit, or function as described herein. The individual item requirements f

25、or device class M shall be in accordance with MIL-PRF-38535, appendix A for non-JAN class level B devices and as specified herein. 3.2 Design, construction, and physical dimensions. The design, construction, and physical dimensions shall be as specified in MIL-PRF-38535 and herein for device classes

26、 Q and V or MIL-PRF-38535, appendix A and herein for device class M. 3.2.1 Case outlines. The case outlines shall be in accordance with 1.2.4 herein. 3.2.2 Terminal connections. The terminal connections shall be as specified on figure 1. 3.2.3 Radiation exposure circuit. The radiation exposure circu

27、it shall be as specified on figure 2. 3.3 Electrical performance characteristics and postirradiation parameter limits. Unless otherwise specified herein, the electrical performance characteristics and postirradiation parameter limits are as specified in table I and shall apply over the full ambient

28、operating temperature range. 3.4 Electrical test requirements. The electrical test requirements shall be the subgroups specified in table IIA. The electrical tests for each subgroup are defined in table I. 3.5 Marking. The part shall be marked with the PIN listed in 1.2 herein. In addition, the manu

29、facturers PIN may also be marked. For packages where marking of the entire SMD PIN number is not feasible due to space limitations, the manufacturer has the option of not marking the “5962-“ on the device. For RHA product using this option, the RHA designator shall still be marked. Marking for devic

30、e classes Q and V shall be in accordance with MIL-PRF-38535. Marking for device class M shall be in accordance with MIL-PRF-38535, appendix A. 3.5.1 Certification/compliance mark. The certification mark for device classes Q and V shall be a “QML“ or “Q“ as required in MIL-PRF-38535. The compliance m

31、ark for device class M shall be a “C“ as required in MIL-PRF-38535, appendix A. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-89543 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL C SHEET 5 D

32、SCC FORM 2234 APR 97 TABLE I. Electrical performance characteristics. Test Symbol Conditions 1/ 2/ 3/ -55C TA +125C unless otherwise specified Group A subgroups Device type Limits Unit Min Max Input offset voltage VOSVCM= 0 V 1 01,04 0.5 mV 2,3 0.9 M,D,P,L,R 1 04 2.0 1 02 1.0 2,3 2.0 1 03 3.0 2,3 4.

33、5 Input offset voltage 4/ temperature coefficient TCVOS-55C and +125C 2,3 04 5 V/C Input offset voltage 4/ adjust VIOADJ+ 1,2,3 04 0.5 mV VIOADJ- -0.5 Input offset current IOSVS= 20 V, VCM= 0 V 5/ 1,3 01,04 10.0 pA 2 4.0 nA M,D,P,L,R 1 04 0.3 nA 1,3 02 20.0 pA 2 6.0 nA 1,3 03 50.0 pA 2 9.0 nA Input

34、bias current IIBVS= 20 V, VCM= 0 V 5/ 1,3 01,04 50.0 pA 2 5.0 nA M,D,P,L,R 1 04 3.0 nA 1,3 02 100.0 pA 2 7.5 nA 1,3 03 200.0 pA 2 10.0 nA See footnotes at end of table. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZ

35、E A 5962-89543 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL C SHEET 6 DSCC FORM 2234 APR 97 TABLE I. Electrical performance characteristics Continued. Test Symbol Conditions 1/ 2/ 3/ -55C TA +125C unless otherwise specified Group A subgroups Device type Limits Unit Min Max Common-m

36、ode 4/ rejection ratio CMRR VCM= IVR = 10.5 V 1 01,02, 04 86 dB VCM= IVR = 10.4 V 2,3 85 VCM= IVR = 10.3 V 1 03 82 VCM= IVR = 10.25 V 2,3 80 Output voltage swing 4/ VORL 2 k 4 All 11.0 V RL 10 k 5,6 12.0 Large-signal voltage gain AVOVO= 10 V, RL 2 k 4 01,04 100.0 V/mV 5,6 35.0 M,D,P,L,R 4 04 50.0 4

37、02 75.0 5,6 30.0 4 03 50.0 5,6 25.0 Supply current ISVO= 0 V 1 01,02, 04 7.0 mA 2,3 11.0 M,D,P,L,R 1 04 7.0 1 03 8.0 2,3 12.0 Power supply rejection ratio PSRR VS= 10 V to 18 V 1 01,02 86 dB 2,3 85 VS= 10 V to 15 V 1 03 82 2,3 80 See footnotes at end of table. Provided by IHSNot for ResaleNo reprodu

38、ction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-89543 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL C SHEET 7 DSCC FORM 2234 APR 97 TABLE I. Electrical performance characteristics Continued. Test Symbol Conditions 1/ 2/ 3/ -55C TA

39、 +125C unless otherwise specified Group A subgroups Device type Limits Unit Min Max Power supply rejection 4/ ratio PSRR+ V+ = +10 V to +18 V, 1 04 86 dB V- = -15 V 2,3 85 PSRR- V- = -10 V to -18 V, 1 86 V+ = +15 V 2,3 85 Output short circuit 4/ current ISC+ 1 04 -42 -2 mA ISC- 2 42 Slew rate 4/ SR

40、AVCL = +1 V 7 01,04 18.0 V/s 8a 10.0 7 02 12.0 8a 7.0 7 03 9.0 8a 5.0 Gain bandwidth product 4/ GBW TA= +25C, fO= 100 kHz 7 01,04 5.5 MHz 02 4.0 03 3.0 Power dissipation 4/ PDVO= 0 V, TA= +25C 1 01,02, 04 210 mW 03 240 Settling time tS6/ 9,10 All 4 s 1/ Unless otherwise specified VS= 15 V, RS= 50 .

41、2/ Devices supplied to this drawing meet all levels M, D, P, L, and R of irradiation however this device is only tested at the R level. Pre and post irradiation values are identical unless otherwise specified in table I. When performing post irradiation electrical measurements for any RHA level, TA=

42、 +25C. 3/ These parts may be dose rate sensitive in a space environment and demonstrate enhanced low dose rate effect. Radiation end point limits for the noted parameters are guaranteed only for the conditions as specified in MIL-STD-883, method 1019. 4/ This parameter not tested post irradiation. 5

43、/ Subgroup 3 is guaranteed if not tested. 6/ Subgroup 10 is guaranteed if not tested. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-89543 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL C SHE

44、ET 8 DSCC FORM 2234 APR 97 Device types 01, 02, 03, 04 Case outlines G and P Terminal number Terminal symbol 1 BAL 2 -IN 3 +IN 4 V- 5 BAL 6 OUT 7 V+ 8 NC FIGURE 1. Terminal connections. FIGURE 2. Radiation exposure circuit. Provided by IHSNot for ResaleNo reproduction or networking permitted without

45、 license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-89543 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL C SHEET 9 DSCC FORM 2234 APR 97 3.6 Certificate of compliance. For device classes Q and V, a certificate of compliance shall be required from a QML-38535 listed manufa

46、cturer in order to supply to the requirements of this drawing (see 6.6.1 herein). For device class M, a certificate of compliance shall be required from a manufacturer in order to be listed as an approved source of supply in MIL-HDBK-103 (see 6.6.2 herein). The certificate of compliance submitted to

47、 DLA Land and Maritime-VA prior to listing as an approved source of supply for this drawing shall affirm that the manufacturers product meets, for device classes Q and V, the requirements of MIL-PRF-38535 and herein or for device class M, the requirements of MIL-PRF-38535, appendix A and herein. 3.7

48、 Certificate of conformance. A certificate of conformance as required for device classes Q and V in MIL-PRF-38535 or for device class M in MIL-PRF-38535, appendix A shall be provided with each lot of microcircuits delivered to this drawing. 3.8 Notification of change for device class M. For device class M, notification to DLA Land and Maritime-VA of change of product (see 6.2 herein