DLA SMD-5962-90881 REV E-2011 MICROCIRCUIT LINEAR HIGH SPEED LOW POWER PRECISION OPERATIONAL AMPLIFIER MONOLITHIC SILICON.pdf

1、 REVISIONS LTR DESCRIPTION DATE (YR-MO-DA) APPROVED A Make change to input offset voltage test and supply current test as specified under table I. Make change to table IIC. In accordance with N.O.R. 5962-R348-92. 92-11-25 M. A. FRYE B Delete outline letter G and case outline A-1. Make change to inpu

2、t bias current test as specified under table I. In accordance with N.O.R. 5962-R264-94. 94-08-18 M. A. FRYE C Add device types 04, 05, 06, 07, 08, and 09. Make changes to 1.3, table I, figure 1, and table II. Redrawn. 96-10-08 R. MONNIN D Drawing updated to reflect current requirements. - ro 03-01-1

3、6 R. MONNIN E Update drawing as part of 5 year review. - jt 11-10-03 C. SAFFLE THE ORIGINAL FIRST SHEET OF THIS DRAWING HAS BEEN REPLACED. REV SHEET REV E E E E E SHEET 15 16 17 18 19 REV STATUS REV E E E E E E E E E E E E E E OF SHEETS SHEET 1 2 3 4 5 6 7 8 9 10 11 12 13 14 PMIC N/A PREPARED BY RIC

4、K C. OFFICER DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 http:/www.landandmaritime.dla.mil STANDARD MICROCIRCUIT DRAWING THIS DRAWING IS AVAILABLE FOR USE BY ALL DEPARTMENTS AND AGENCIES OF THE DEPARTMENT OF DEFENSE CHECKED BY CHARLES E. BESORE APPROVED BY MICHAEL A. FRYE MICROCIRCUIT, LINEAR, H

5、IGH SPEED, LOW POWER, PRECISION, OPERATIONAL AMPLIFIER, MONOLITHIC SILICON DRAWING APPROVAL DATE 90-10-10 AMSC N/A REVISION LEVEL E SIZE A CAGE CODE 67268 5962-90881 SHEET 1 OF 19 DSCC FORM 2233 APR 97 5962-E529-11 Provided by IHSNot for ResaleNo reproduction or networking permitted without license

6、from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-90881 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL E SHEET 2 DSCC FORM 2234 APR 97 1. SCOPE 1.1 Scope. This drawing documents two product assurance class levels consisting of high reliability (device classes Q and M) and space

7、application (device class V). A choice of case outlines and lead finishes are available and are reflected in the Part or Identifying Number (PIN). When available, a choice of Radiation Hardness Assurance (RHA) levels is reflected in the PIN. 1.2 PIN. The PIN is as shown in the following example: 596

8、2 - 90881 01 M C A Federal stock class designator RHA designator (see 1.2.1) Device type (see 1.2.2) Device class designator Case outline (see 1.2.4) Lead finish (see 1.2.5) / (see 1.2.3) / Drawing number 1.2.1 RHA designator. Device classes Q and V RHA marked devices meet the MIL-PRF-38535 specifie

9、d RHA levels and are marked with the appropriate RHA designator. Device class M RHA marked devices meet the MIL-PRF-38535, appendix A specified RHA levels and are marked with the appropriate RHA designator. A dash (-) indicates a non-RHA device. 1.2.2 Device types. The device types identify the circ

10、uit function as follows: Device type Generic number Circuit function 01 TLE2021M High speed low power precision single operational amplifier 02 TLE2022M High speed low power precision dual operational amplifier 03 TLE2024M High speed low power precision quad operational amplifier 04 TLE2021AM High s

11、peed low power precision single operational amplifier 05 TLE2022AM High speed low power precision dual operational amplifier 06 TLE2024AM High speed low power precision quad operational amplifier 07 TLE2021BM High speed low power precision single operational amplifier 08 TLE2022BM High speed low pow

12、er precision dual operational amplifier 09 TLE2024BM High speed low power precision quad operational amplifier 1.2.3 Device class designator. The device class designator is a single letter identifying the product assurance level as follows: Device class Device requirements documentation M Vendor sel

13、f-certification to the requirements for MIL-STD-883 compliant, non-JAN class level B microcircuits in accordance with MIL-PRF-38535, appendix A Q or V Certification and qualification to MIL-PRF-38535 1.2.4 Case outlines. The case outlines are as designated in MIL-STD-1835 and as follows: Outline let

14、ter Descriptive designator Terminals Package style C GDIP1-T14 or CDIP2-T14 14 Dual-in-line G MACY1-X8 8 Can P GDIP1-T8 or CDIP2-T8 8 Dual-in-line 2 CQCC1-N20 20 Square leadless chip carrier 1.2.5 Lead finish. The lead finish is as specified in MIL-PRF-38535 for device classes Q and V or MIL-PRF-385

15、35, appendix A for device class M. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-90881 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL E SHEET 3 DSCC FORM 2234 APR 97 1.3 Absolute maximum rat

16、ings. 1/ 2/ Supply voltage (+VCC) +20 V dc Supply voltage (-VCC) . -20 V dc Differential input voltage . 0.6 V dc 3/ Input voltage range (VI) (any input) . VCCInput current (II) (each input) . 1 mA Output current (IO): Device types 01, 04, 07 . 20 mA Device types 02, 05, 08 . 30 mA Device types 03,

17、06, 09 . 40 mA Total current into +VCCterminal: Device types 01, 04, 07 . 20 mA Device types 02, 03, 05, 06, 08, 09 . 80 mA Total current into -VCCterminal: Device types 01, 04, 07 . 20 mA Device types 02, 03, 05, 06, 08, 09 . 80 mA Duration of short circuit current at ( or below) +25C Unlimited 4/

18、Storage temperature range . -65C to +150C Terminal temperature for 60 seconds: Case 2 . +260C Lead temperature, soldering 6 mm (1/16 inch) from case for 60 seconds: Cases C, G, and P . +300C Junction temperature (TJ) . +150C Power dissipation (PD) Cases 2 and C 1375 mW 5/ Case G . 650 mW 5/ Case P 1

19、050 mW 5/ Thermal resistance, junction-to-case (JC) . See MIL-STD-1835 1.4 Recommended operating conditions. Supply voltage (VCC) 2 V dc minimum, 20 V dc maximum Common-mode input voltage (VIC) (+VCC= 5 V) -0 V dc minimum, 3.2 V dc maximum Common-mode input voltage (VIC) (+VCC= 15 V) -15 V dc minimu

20、m, 13.2 V dc maximum Ambient operating free-air temperature (TA) . -55C to +125C Source resistance from ground to input terminals (RS) . 50 _ 1/ Stresses above the absolute maximum rating may cause permanent damage to the device. Extended operation at the maximum levels may degrade performance and a

21、ffect reliability. 2/ All voltage values, except differential voltages, are with respect to the midpoint between +VCCand -VCC. 3/ Differential voltages are at the noninverting input with respect to the inverting input. Excessive current will flow if a differential input voltage in excess of approxim

22、ately 600 mV is applied between the inputs unless some limiting resistance is used. 4/ The output may be shorted to either supply. Temperature and supply voltage must be limited to ensure that the maximum dissipation rating is not exceeded. 5/ Above +25C derate at a factor of 11.0 mW/C for cases C a

23、nd 2, 5.2 mW/C for case G, and 8.4 mW/C for case P. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-90881 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL E SHEET 4 DSCC FORM 2234 APR 97 2. APPL

24、ICABLE DOCUMENTS 2.1 Government specification, standards, and handbooks. The following specification, standards, and handbooks form a part of this drawing to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract. DEPART

25、MENT OF DEFENSE SPECIFICATION MIL-PRF-38535 - Integrated Circuits, Manufacturing, General Specification for. DEPARTMENT OF DEFENSE STANDARDS MIL-STD-883 - Test Method Standard Microcircuits. MIL-STD-1835 - Interface Standard Electronic Component Case Outlines. DEPARTMENT OF DEFENSE HANDBOOKS MIL-HDB

26、K-103 - List of Standard Microcircuit Drawings. MIL-HDBK-780 - Standard Microcircuit Drawings. (Copies of these documents are available online at https:/assist.daps.dla.mil/quicksearch/ or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.) 2.

27、2 Order of precedence. In the event of a conflict between the text of this drawing and the references cited herein, the text of this drawing takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained. 3. REQUIREMENTS

28、3.1 Item requirements. The individual item requirements for device classes Q and V shall be in accordance with MIL-PRF-38535 as specified herein, or as modified in the device manufacturers Quality Management (QM) plan. The modification in the QM plan shall not affect the form, fit, or function as de

29、scribed herein. The individual item requirements for device class M shall be in accordance with MIL-PRF-38535, appendix A for non-JAN class level B devices and as specified herein. 3.2 Design, construction, and physical dimensions. The design, construction, and physical dimensions shall be as specif

30、ied in MIL-PRF-38535 and herein for device classes Q and V or MIL-PRF-38535, appendix A and herein for device class M. 3.2.1 Case outlines. The case outlines shall be in accordance with 1.2.4 herein. 3.2.2 Terminal connections. The terminal connections shall be as specified on figure 1. 3.2.3 Test c

31、ircuits. The test circuits shall be as specified on figure 2. 3.3 Electrical performance characteristics and postirradiation parameter limits. Unless otherwise specified herein, the electrical performance characteristics and postirradiation parameter limits are as specified in table I and shall appl

32、y over the full ambient operating temperature range. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-90881 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL E SHEET 5 DSCC FORM 2234 APR 97 TABLE

33、I. Electrical performance characteristics. Test Symbol Conditions -55C TA +125C unless otherwise specified Group A subgroups Device type Limits Unit Min Max Input offset voltage VIOVCC= 2.5 V, VIC= 0 V, 1 01 600 V VO= 0 V, RS= 50 2,3 1100 VCC= 15 V, VIC= 0 V, 1 500 VO= 0 V, RS= 50 2,3 1000 VCC= 2.5

34、V, VIC= 0 V, 1 02 600 VO= 0 V, RS= 50 2,3 800 VCC= 15 V, VIC= 0 V, 1 500 VO= 0 V, RS= 50 2,3 700 VCC= 2.5 V, VIC= 0 V, 1 03 1100 VO= 0 V, RS= 50 2,3 1300 VCC= 15 V, VIC= 0 V, 1 1000 VO= 0 V, RS= 50 2,3 1200 VCC= 2.5 V, VIC= 0 V, 1 04 300 VO= 0 V, RS= 50 2,3 600 VCC= 15 V, VIC= 0 V, 1 200 VO= 0 V, RS

35、= 50 2,3 500 See footnotes at end of table. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-90881 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL E SHEET 6 DSCC FORM 2234 APR 97 TABLE I. Electr

36、ical performance characteristics Continued. Test Symbol Conditions -55C TA +125C unless otherwise specified Group A subgroups Device type Limits Unit Min Max Input offset voltage VIOVCC= 2.5 V, VIC= 0 V, 1 05 400 V VO= 0 V, RS= 50 2,3 550 VCC= 15 V, VIC= 0 V, 1 300 VO= 0 V, RS= 50 2,3 450 VCC= 2.5 V

37、, VIC= 0 V, 1 06 850 VO= 0 V, RS= 50 2,3 1050 VCC= 15 V, VIC= 0 V, 1 750 VO= 0 V, RS= 50 2,3 950 VCC= 2.5 V, VIC= 0 V, 1 07 200 VO= 0 V, RS= 50 2,3 300 VCC= 15 V, VIC= 0 V, 1 100 VO= 0 V, RS= 50 2,3 200 VCC= 2.5 V, VIC= 0 V, 1 08 250 VO= 0 V, RS= 50 2,3 400 VCC= 15 V, VIC= 0 V, 1 150 VO= 0 V, RS= 50

38、 2,3 300 See footnotes at end of table. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-90881 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL E SHEET 7 DSCC FORM 2234 APR 97 TABLE I. Electrical

39、 performance characteristics Continued. Test Symbol Conditions -55C TA +125C unless otherwise specified Group A subgroups Device type Limits Unit Min Max Input offset voltage VIOVCC= 2.5 V, VIC= 0 V, 1 09 600 V VO= 0 V, RS= 50 2,3 800 VCC= 15 V, VIC= 0 V, 1 500 VO= 0 V, RS= 50 2,3 700 Input offset c

40、urrent IIOVCC= 5 V or 15 V, 1 01,04,07 3 nA VIC= 0 V, RS= 50 2,3 5 1,2,3 02 5 1 03 6 2,3 10 1 05 4 2,3 5 1 06 5 2,3 9 1 08 3 2,3 5 1 09 4 2,3 8 See footnotes at end of table. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWI

41、NG SIZE A 5962-90881 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL E SHEET 8 DSCC FORM 2234 APR 97 TABLE I. Electrical performance characteristics Continued. Test Symbol Conditions -55C TA +125C unless otherwise specified Group A subgroups Device type Limits Unit Min Max Input bias

42、current IIBVCC= 5 V or 15 V, 1,2,3 01 70 nA VIC= 0 V, RS= 50 1,2,3 02 70 1 03 70 2,3 90 1,2,3 04 65 1 05 65 2,3 70 1 06 65 2,3 85 1,2,3 07 60 1 08 60 2,3 70 1 09 60 2,3 80 Common mode input voltage range VICRVCC= 15 V, RS= 50 1,2,3 All -15 to 13.2 V VCC= 5 V, RS= 50 0 to 3.2 See footnotes at end of

43、table. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-90881 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL E SHEET 9 DSCC FORM 2234 APR 97 TABLE I. Electrical performance characteristics Cont

44、inued. Test Symbol Conditions -55C TA +125C unless otherwise specified Group A subgroups Device type Limits Unit Min Max Maximum positive peak output voltage swing +VOMVCC= 15 V, RL= 10 k 4 01,04,07 14.0 V 5,6 13.8 4 02,05,08 14.0 5,6 13.9 4 03 13.8 5,6 13.7 4 06 13.9 5,6 13.7 4 09 14 5,6 13.8 Maxim

45、um negative peak output voltage swing -VOMVCC= 15 V, RL= 10 k 4 All -13.7 V 5,6 -13.6 High level output voltage VOHVCC= 5 V, RL= 10 k 1 01,02,04,05, 4.0 V 2,3 07,08 3.8 1 03,06 3.9 2,3 3.7 1 09 4 2,3 3.8 See footnotes at end of table. Provided by IHSNot for ResaleNo reproduction or networking permit

46、ted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-90881 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL E SHEET 10 DSCC FORM 2234 APR 97 TABLE I. Electrical performance characteristics Continued. Test Symbol Conditions -55C TA +125C unless otherwise specified

47、Group A subgroups Device type Limits Unit Min Max Low level output voltage VOLVCC= 5 V, RL= 10 k 1 All 0.8 V 2,3 0.95 Large signal differential voltage amplification AVDVCC= 5 V, RL= 10 k, 4 01,02,04,07 0.3 V/V VO= 1.4 V to 4 V 5,6 0.1 4 03 0.2 5,6 0.1 4 05 0.4 5,6 0.1 4 06 0.3 5,6 0.1 4 08 0.5 5,6 0.1 4 09 0.4 5,6 0.1 VCC= 15 V, RL= 10 k, 4 01,04,07 1.0 VO= 10 V 5,6 0.5 4,5,6 02 0.8 03 0.4 05 1.0 See footnotes at end of table. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-9088