DLA SMD-5962-90968-1991 MICROCIRCUITS LINEAR 4TH ORDER ELLIPTIC NOTCH FILTER MONOLITHIC SILICON《硅单块 第四序列椭圆陷频滤波器 直线式微型电路》.pdf

1、SMD-5962-90968 59 999999b O005838 2 = PMIC WA THIS DRAWING IC AVAILABLE OR USE BY ALL DEPARTMENTS AND AGENCIES OF THE DESC FORM 193 SEP 87 BEENSE ELECTRONICS SUPPLY CEMVER DAYTOM, OHIO 45444 MICROCIRCUITS, LINEAR, 4TH ORDER ELLIPTIC NOTCH FILTER, MONOLITHIC SILICON SIZE CAGE CODE I 596240968 CHEET 1

2、 OF 17 euS. GOVIRMMIHT FINTIHG WKt: 1917 - 748-11p/coOIi 5962-EO24 BISTRIRUTION STATEMENT A. Approved for public rdease; dislrlbullon IS uPilimiled. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-t . -. -. 1. SCOPE 1.1 Scope. This drawing forms a pa

3、rt of a one part - one part number documentation system (see 6.6 herein). 1.1) and space application (device classes S and V), and a choice of case outlines and lead finishes are available and are reflected in the Part or Identifying Number (PIN). represent non-JAN class i microcircuits in accordanc

4、e with 1.2.1 of MIL-STD-883, “Provisions for the use of MIL-STD-883 in conjunction with compliant non-JAN devices“. hardness assurance(RHA) levels are reflected in the PIN. Two product assurance classes consisting of military high reliability (device classes 6, Q, and Device class M microcircuits Wh

5、en avai labte, a choice of radiation 1.2 PIN. The PIN shall be as shown in the following example: - X - 5962 90968 01 - n. C I I I l I I I I I I A L I I Federal RHA Devi ce Devi ce Case Lead stock class designator type class outline finish (See 1.2.2) designator (See 1.2.4) (See 1.2.5) designator (S

6、ee 1.2.1) - / (See 1.2.3) / Drawing number 1.2.1 Radiation hardness assurance (RHA) designator. Device classes M, E, and S RHA marked devices shall meet the MIL-M-38510 specified RHA levels and shall be marked with the appropriate RHA designator. Device classes Q and V RHA marked devices shall meet

7、the MIL-1-38535 specified RHA levels and shall be marked with the appropriate RIiA designator. A dash (-) indicates a non-RHA device. 1.2.2 Device typds). The device typeCs) shall identify the circuit function as follows: Device type Generic number Circuit function O1 LHF90 4th-order elliptic notch

8、filter 1.2.3 Device class desimator. product assurance level as follows: This device class designator shall be a single letter identifying the Device class Device requirements documentation M Vendor self-certification to the requirements for non-JAN class B microcircuits in accordance with 1.2.1 of

9、MIL-STD-883 B or S Certification and qualification to MIL-M-38510 Q OP V Certification and qualification to MIL-1-38535 For device classes M, B, and S, case outline(s) shall meet the requirements in 1.2.4 mouelingo. appendix 6 of HIL-EI-38510 and as listed below. the requirements of HIL-1-38535, app

10、endix C of MIL-M-J8510, and as listed below. For device classes Q and V, case outline(s) shall meet Outline letter Case,out line C D-I (IC-Lead, .785“ x .310“ x .2“), dual-in-line package The lead finish shall be as specified in MIL-M-38510 for classes M, 8, and s or 1.2.5 Lead finish. MIL-1-38535 f

11、or classes Q and V. packaging. considered acceptable and interchangeable wi thout preference. Finish letter “X“ shall not be marked on the microcircuit or its The ttXft designation is for use in specifications when lead finishes A, 6, and C are Provided by IHSNot for ResaleNo reproduction or network

12、ing permitted without license from IHS-,-,-SMD-5962-909bB 59 m 9999996 0005840 O 1.3 Absolute maximum ratings. I/ supply voltage (v+ to V-) 2/ - - - - - - - - - - - - - - Voltage at any input or output 2/- - - - - - - - - - - - Input current at any pin 3/ - - - - - - - - - - - - - - Package input cu

13、rrent (IIN) 3/ - - - - - - - - - - - - - Pouer dissipation (PD) - - - - - - - - - - - - - - - - - Storage temperature range - - - - - - - - - - - - - - - Lead temperature (soldering, 10 seconds) - - - - - - - Junction temperature (TJ) - - - - - - - - - - - - - - - Thermal resistance, junction-to-amb

14、ient hJA) - - - - - * Thermal resistance, junction-to-case (OJ ) - - - - - - - 1. -0.3 V to +I6 y V- -0.3 V to V 5mA 20 mA 500 mW -65C to +150C +300 C +I5OoC See MIL-M-38510, appendix C 59OC/W board mounted +0.3 V 1.4 Recommended operatinq conditions. supply voltage (v to LO- - - - - - - - - - - - -

15、 - - - 4.0 V to 15.0 V Ambient operating temperature range (TA) - - - - - - - - -55C to +125“C 2. APPLICABLE DOCUI.IENTS 2.1 xds, bulletin, and handbook. Unless otherwise specified, the following specifications, standards, bulletin, and handbook of the issue listed in that issue of the Department of

16、 Defense Index of Specifications and Standards specified in the solicitation, form a part of this drawing to the extent specified herein. SPECIFICATIONS MILITARY MIL-M-38510 - 1-iicrocircuits, General Specification for. MIL-1-38535 - Integrated Circuits, Manufacturing, General Specification for. STA

17、NDARDS MILITARY I4IL-STB-480 - Configuration Control-Engineering Changes, Deviations and Waivers. I-lIL-STD-883 - Test !,lethods and Procedures for I.licroelectronics. BULLETIN MILITARY MIL-BUL-103 - List of Standardized Military Drawings (SMDs). HANDBOOK MILITARY II I L-HDBK-780 (Copjes of the spec

18、ifications,. standards, bulletin, and handbook required by manufacturers in connection with specific acquisition functions s.iould be obtained from the contracting activity or as directed by the contracting activity.) DESC FORM 193A SEP a7 Provided by IHSNot for ResaleNo reproduction or networking p

19、ermitted without license from IHS-,-,-2.2 Order of precedence. In the event of a conflict between the text of this drawing and the references cited herein, the text of this drawing shall take precedence. 3. REQUPREf.1ENTS 3.1 Item requirements. The individual item requirements for device class M sha

20、ll be in accordance uith 1.2.1 of MIL-STD-883, lProvisions for the use of MIL-STD-883 in conjunction with compliant non-JAN devices“ and as specified herein. The individual item requirements for device classes 8 and S shall be in accordarice with HIL-M-38510 and as specified herein. characterization

21、 table for each device type shall be included in this SMD. requirements for device classes Q and V shall be in accordance with MIL-1-38535, the device manufacturers Quality Management (Qii) plan, and as specified herein. For device classes Ei and S, a full electrical The individual item 3.2 Design,

22、construction, and physical dimensions. The design, construction, and physical dimensions shall be as specified in MIL-1.1-38510 for device classes M, 8, and S and MIL-1-38535 for device classes Q and V and herein. 3.2.1 Case outline(s). The case outline(s) shall be in accordance with 1.2.4 herein. 3

23、.2.2 Terminal connections. 3.2.3 Block diagram. The block diagram shall be as specified on figure 2. 3.3 Electrical performance character isti cs and postirradiation parameter li mi ts. Unless otherwise specified herein, the electrical performance characteristics and postirradiation parameter limits

24、 are as Specified in table I and shall apply over the full ambient operating temperature range. The terminal connections shall be as specified on figure 1. 3.4 Electrical test requirements. The electrical test requirements shall be the subgroups specified in table IIA. The electrical tests for each

25、subgroup are defined in table I. The part shall be marked with the PIN listed in 1.2 herein. 3.5 I-arking. Marking for device class M shall be in accordance with NIL-STD-883 (see 3.1 herein). be marked as listed in MIL-BUL-103. 1711L-1-1-38510. Marking for device classes Q and V shall be in accordan

26、ce with MIL-1-38535. In addition, the manufacturers PIN may also Marking for device classes B ar,d S shall be in accordance with 3.5.1 Certificetion/complionc mark. The compliance mark for ,jevice Glass M shall be a llC1l as The certification mark for device classes Q and V shall be a required in MI

27、L-STD-883 (see 3.1 herein). “J1 or “JAN1 us required in MIL-M-38510. tlQML1 as required in MIL-1-38535. 3.6 Certificate OP compliance. The certification mark for device classes Ei and S shall be a For device class M, a certificate of compliance shall be required from a manufacturer in order to be li

28、sted as an approved source of supply in MIL-BUL-103 (see 6.7.3 herein). For device classes Q and V, a certificate of compliance shall be required from a QML-38535 listed manufacturer in order to supply to the requirements of this drawing (see 6.7.2 herein). of compliance submitted to DESC-ECS prior

29、to listing as an approved source of supply for this drawing shall affirm that the manufacturers product meets, for device class M the requirements of MIL-STD-883 (see 3.1 herein), or for device classes Q and V, the requirements of MIL-1-38535 and the requirements herein. The certificate 3.7 Certific

30、ate of conformance. A certificate of conformance as required for device class M in MIL-STB-883 (see 3.1 herein) or device classes B and S in MIL-M-38510 or for device classes Q and V in 1.1Ib-1-38535 shall be provided with each lot of microkircuits delivered to this drawing. 3.8 Notification of chan

31、ge for device class II. For device class El, notification to DESC-ECS of change of product (see 6.2 herein) involving devices acquired to this drawing is required for any change as defined in MIL-STD-480. 3.9 Verification and review for device class M. For device class M, DESC, DESCs agent and the a

32、cquiring activity retain the option to review the manufacturers facility and applicable required docunientation. Offshore documentation shall be made avai table onshore at the option of the reviewer. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-4

33、SMD-5962-90768 59 9999996 0005842 4 E. i 1, 2, 3 i voltage, pin 6 I I XLS = Y- or v = 15 v, I I I J V- = O V, XLS = +2.5 V I/ !.I I 1.1 I I I I I L I I . I I I I I I I I V- = O V, XLS = +2.5 V i/ I I I I Logical I input I vIH i Y+ - V- = IO y, voltage, pin 6 I I XLS Y- or v = +5 V, I I I I I I I VOL

34、 i I Logical O output I XLS V , jIoUTI = 4 mA voltage, pin 6 I I I I L I I I I + I Logical 1 output I VOH I XLS = V I IIOUTI = 4 mA voltage, pin 6 I I I I I L I I I I center frequency I fo i c 2/ range I I I I I I L I I I I I Clock i Pin 6 i fCLK i i 4, 5, 6 i I I J I I I 14 I I I I I I ; I I freque

35、ncyJ , L I I Pins 4 I I I and 5 I I I I I I i I I frequency ratio 1 I fcLK = 167 kHz U Clock to center IfCLK/foll W = D = Y-, R = V , I I I5f6 I I I I I u I I I I I I I5f6 I I 1, I I 141 I fCLK = 500 kHz -1 I “ I I I5,6 1 I IfcLK/fozIW = D = R = GND, fCLK = 250 kHz1 4 1 I I IfcLK/fo3 W = V , D = GND

36、, R =Wbl I I I I 01 I I I I I 2.0 I I I I I I I 4.0 I I I I I I I I I I I I I 33 I I 49.75 I I 49.5 I I 99.59 I 199 I 33.17 I I I I I See footnotes at end of table. s. . i Unit I Max i I 0.81 V I I I I I I -4.c I l I I I 30 I kHz - 1.5 4. c MHz i I 33.843 I I 34 I I I 50.75 I - 51 - 101.51 I I 102 I

37、 MILRAW DRAWING BWENSE UECiRONICC SUPPLY CEHIU( ESC FORM 193A SEP 07 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- SMD-5962-90768 59 m 9999996 0005844 m 1 _=_ . - I. TABLE I. Electrical performance characteristics - Continued. l i I Unit I Max I L

38、 I I I I I I I I I Test !Symbol I Conditions ;Group A ;Device: Limi 1 -55C S T S +125“C !subgroups I type I I unless otherwise specified 1 I I I l v = 95 9, v- = -5 v f I I Min I I I I 0.2 1 dB Passband gain HON IDC an$ 20 kHn, 1.1 = D = V-, IR = V , fCLK = 167 kHz I 4, 5, 6 I O1 I l I 1 I I l I J L

39、 I ,I I I . 1. IW = D = R = GND, fCLK = 250 kHZl I I I I I I I I I _t 0.1451 I I I L I 0.2901 I - 0.6001 I I - -30 I I i. I I l jW = V, D = GND, R = V-, ifCLK = 500 kHz 1 I I I 1 I 0.11 I Ratio of passband width to center frequency I l I I 4, 5, 6 + PBt, :i4 = D = V-, R = V , jfCLK = 167 IcHz I I i

40、I 0.24 l I $- I 0.5C I I - r I I I I I (1.J = D = I? = GNB, fCLK = 250 kHZl I l I9 Il,! = V , D = GND, R = V-, ifCL, VouT (pin 9) D (pin 10) VINS (pin 11) VIN1 (pin 12) GND (pin, 13) Vt (pin. 14.) This is a three-Level logic pin. and frequency divider are enabled and CLK (pin 6) is an output. to GND

41、 (pin 13), the crystal oscillator and frequenfy divider are disabled and pin 6 is an input Par a clock swtnqing between V and- V . When XLS is tied to V-, the crystal osciltator and frequency divider are disabled andpin 6 is a TTL level clock input for a clock signal swinging between GND and V or be

42、tween V- and GNO. When XLC is tied to V, the crystal oscillator When XLS is tied This the negative power supply pin. capacitor. This is the filter output. This two-tevet logic input is used to set thedepth of the natch (the attenuation at fD). respectively. Note, however, that the notch depth is als

43、o dependent om the width setting (pin I. It should be bypassed with at least a 0.1 pF For single-suppty operation, connect this pin to system ground. When I is tied to GND or V-, the typical notch depth is 48 dB OF 39 d6, See the electricat characteristics for tested limits. This is the input tcr th

44、e difference amplifier section of the natch filter. This is the input to the internal bandpasc filter. to pin 11. inserted between pin 71 and pTn 12. This is the analog ground reference for the LMFSO. GNF should be connected ta the system ground. single positive power supply voltage, pin 13 should b

45、e connected to a “clean“ reference voLtagc midway between V and V- This ia the positive power suppby pin. It should be bypassed with at least a 0.7 pF capacitar, This pin is normaLly connected For wide bandwidth applications, an- anti-aliastng filter can be In split supply applications, When operati

46、ng the LMF9O from a = SIZE A P. 5962-90968 STANDARDIZED MltEAW DRAWING BU: ENSE UECTRONICS SUPPLY CENTER I SHEET DAN, onto 45344 DESC FORM 193A SEP 89 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-e SMD-5962-70968 59 W 999999b 0005854 O W 6.6 One p

47、art - one part number system. The one part - one part number system described below has been developed to allow for transitions between identical generic devices covered by the four major microcircuit requirements documents (MIL-M-38510, MIL-H-38534, MIL-1-38535, and 1.2.1 of MIL-STD-883) without th

48、e necessity for the generation of unique PINS. represent different class levels, and previously when a device manufacturer upgraded military product from one class level to another, the benefits of the upgraded product were unavailable to the Original Equipment Manufacturer (OEM), that was contractu

49、ally locked into the original unique PIN. establishing a one part number system covering all four documents, the OEM can acquire to the highest class level available for a given generic device to meet system needs without modifying the original contract parts selection criteria. The four military requirements documents By Example PIN Manufacturing Document Mi litarv documentation format under new system source listing