DLA SMD-5962-90995 REV B-1994 MICROCIRCUIT LINEAR 12-BIT A D CONVERTER HYBRID《硅单块 12比特模数转换器 直线式微型电路》.pdf

1、I 999999b 0055355 542 PI DEFENSE LGSTlCS AGENCY DEFENSE ELECTRWCS SUPPLY CENZER 1507 W1LMWGTn)CJ PIKE DAYTON, ocf 45444-5765 DESC-ELDT (Mr. Zahn/(DSN 986) 513-296-6049/gz) I l 15 JUL. 1994 SUBJECT: Notice of Revision (NOR) 5962-R223-94 for Standardized Military Drawing(SMD) 5962-90995. MilitarylIndu

2、stry Distribution The enclosed NOR is approved for use effective as of the date of the NOR. In accordance with MIL-STD-100 SMD holders should, as a minimum, handwrite those changes described in the NOR to sheet 1 of the subject SMD. After completion, the NOR should be attached to the subject SMD for

3、 future reference. Those companies who were listed as approved sources of supply prior to this action have agreed to actions taken on devices for which they had previously provided DESC a certificate of compliance. This is evidenced by an existing active current certificate of compliance on file at

4、DESC along with a DESC record of verbal coordinarion. devices is considered concurrence with the new revision unless DESC is otherwise notified. The certificate of compliance for these If you have comments or questions, please contact Gary Zahn at (DSN)986-6049/(513)296-6049. 1 Encl IM Ahief , Elect

5、ro add “E“. Revisions description column; add “Changes in accordance with NOR 5962-R223-94“ Revisions date column; add “94-06-24“. Revision level block; change “A“ to “E“. Rev status of sheets; For sheets 1 and 6 change “A“ to “6“. Table I, + VINL, maximum limits column; delete “0.8“ and substitute

6、“0.7“. Revision level block; change “A“ to “6“. Sheet 6: 15a. ACTIVITY ACCOMPLISHING REVISION b. REVISION COMPLETED (Signature) c. DATE SIGNED (YYMMDD) DD Form 1695, APR 92 Previous editions are obsolete Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-

7、,-= b 0055357 315 I NOTICE OF REVISION (NOR) This revision described below has been authorized for the document listed. Form Approved I. DATE OM6 NO. 0704-0188 (WMMDD) 93-08-10 I 2. PROCURING ACTIVITY NO. I b. ADDRESS (Street, City, State, Zip Code) 4. ORIGINATOR a. TYPED NAME (First, Middle Initial

8、, Defense Electronics Supply Center 1507 Wi lmington Pike ayton, OH 45444-5270 -.-. -. Last) N. A. 3. DODAAC I 5. CAGE CODE 67268 7. CAGE CODE 67268 5962-90995 9. TITLE OF DOCUMENT MICROCIRCUIT, LINEAR, 12-BIT A/D CONVERTER, HYBRID. 11. ECP NO. IO. REVISION LETTER a. CURRENT b. NEW None A N. A. Shee

9、t 1: Revisions ltr column; add “A“. Revisions description column; add “Changes in accordance with NOR 5962-R209-93“. Revisions date column; add “93-08-10“. Revision level block; add “A“. Rev status of sheets; For sheet 6 add “A“. Table I, + VI“, limits column; delete “0.8“ from the maximum column an

10、d add “2.0“ to the mimimum column. Revision level block; add “A“. Sheet 6: b. ACTIVITY AUTHORIZED TO APPROVE CHANGE FOR GOVERNMENT 14. THIS SECTION FOR GOVERNMENT USE ONLY I I C. TYPED NAHE (First, Middle Initial, Last) (1) Existing document supplemented by the NOR may be used in manufacture. (2) Re

11、vised document must be received before manufacturer may incorporate this change. a. (X one) d. TITLE Chief, Electronic Components Branch 15a. ACTIVITY ACCOMPLISHING REVISION e. SIGNATURE Kendall A. Cottongim b. REVISION COMPLETED (Signature) f. DATE SIGNED (YYMMDD) 93-08-10 c. DATE SIGNED (YYMMDD) 9

12、3-08-10 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-I m 9999976 0055358 251 m LTR DESCRIPTION DATE (YR-MO-DA) APPROVED REV STATUS OF SHEETS PMIC NIA STANDARDIZED MILITARY DRAWING THIS DRAUING IS AVAILABLE FOR USE BY ALL DEPARTMENTS AND AGENCIES O

13、F THE DEPARTMENT OF DEFENSE AMSC N/A DEFENSE ELECTRONICS SUPPLY CENTER MICROCIRCUIT, LINEAR, 12-BIT A/D CONVERTER, HYBRID I DESC FORM 193 JUL 91 DISTR!u?J_!=TJ. Approved for public release; distribution is uni irnitcd, 5962-286 Provided by IHSNot for ResaleNo reproduction or networking permitted wit

14、hout license from IHS-,-,-= 9999b 0055359 I198 SIZE STANDARDIZED A MILITARY DRAWING DEFENSE ELECTRONICS SUPPLY CENTER DAYTON, OHIO 45444 ,- - . L :E i 1 Th!s d-auing describes device requirements for hybrid microcircuits to be processed in accordance with MIL-H-38534. 1. Lz. Ths drawing forms a part

15、 of a one part - one part number documentation system (see 6.6 herein). T:*,o praauc: assurance classes, military high reliability (device class H) and space application (device class K) and choice of case outlines and lead finishes are available and are reflected in the Part or Identifying Number (

16、PIN). Uhen adai iable, a choice of radiation hardness assurance levels are reflected in the PIN. 1.2 M. The PIN shall be as shown in the following example: - X X H - - 5 962 90995 - o1 - I l I I I I l l l I I t I I I I ! I 1 0 I I 1 * - 1 L Federal RHA Case Lead designator (See 1.2.1) (See 1.2.2) de

17、signator (See 1.2.4) (See 1.2.5) stock class designator type c lass outline finish f (See 1.2.3) / Drawing number 1.2.1 Radiation hardness assurance (RHA) designator. Device classes ti and K RHA marked devices shall meet the A dash (-1 indicates a MIL-H-38534 specified RHA levels and shall be marked

18、 with the appropriate RHA designator. non-RHA device. 1.2.2 Device type(s). The device type($) shall identify the circuit function as follows: Device type Generic number Circuit function o1 CLC9258 12-bit AID converter 1.2.3 Device class designator. This device class designator shall be a single let

19、ter identifying the product assurance level as follows: Device class Device requirements documentation H or K 1.2.4 Case outline(s1. Certi f i cation and qualification to MIL-H-38534 The case outline(s) shall be as designated in appendix C of MIL-M-38510, and s follows: Outline letter Case outline X

20、 See figure 1, (40-lead, 2.115“ x 1.100“ x .252“), dual-in-line package 1.2.5 Lead finish. The lead finish shall be as specified in MIL-H-38534 for classes H and K. Finish letter “XI shall not be marked on the microcircuit or its packaging. lead finishes A, 8, and C are considered acceptable and int

21、erchangeable without preference. The “X“ designation is for use in specifications when 5962-90995 REVISION LEVEL SHEET 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-W 99b 0055360 90T SIZE A STANDARDIZED 1.3 absolute maximum ratinas. Supply voltag

22、es: 5962-90995 -VET-“- Analog input voltage range - - - - - - - - - - - Gain and off-t adjust voltage range - - - - - - CONVERT and OE input voltage range - - - - - - - Output short circuit duration (one pin to GND) - Differential voltage between any 2 GNDs - - - - VREF output current - - - - - - -

23、- - - - - - - Power dissipation (PD) - - - - - - - - - - - - - Thermal resistance (case to ambient): (ocA, 500 LFPM air flow) - - - - - - - - - - - Junction temperature (TJ) - - - - - - - - - - - - Junction-case temperature rise - - - - - - - - - Storage temperature - - - - - - - - - - - - - - - Lea

24、d temperature (soldering, 10 seconds) - - - - (oCA, still air) - - - - - - - - - - - - l.L Recommended operatinq conditions. Supply voltages: +“L-_- -yEE :- Analog input voltage - - - - - - - - - - - - - - Digital input voltage range - - - - - - - - - - Differential input voltage between any 2 GNDs

25、- VREF output current - - - - - - - - - - - - - - Minimum CONVERT pulse width high (tpwy) - - - - Minimum CONVERT pulse width low (t - - - - - Case operating temperature range (7:) - - - - - 2. APPLICABLE DOCUMENTS t7.0 V dc +18.0 V dc -7.0 V dc ;:EE to +vcc to tVct Infinite 2M1 mV 20 mA 4.2 W 16OC/

26、W 7OC/U +175OC 16OC -65OC to +150C +3moc o Fto tVCC t4.75 V dc to +5.25 V dc t14.25 V dc to +15.75 V dc 2 VP+ (within i2 V) 10 mV 2niA 30 ns 40 ns -4.94 V dc to -5.46 V dc o v to +vcc -55OC to +125OC 2.1 Government specifications, standards, and handbook. Unless otherwise specific-, the specificatio

27、ns, standards, and handbook of the issue listed in that issue of the Department Specifications and Standards specified in the solicitation, form a part of this drawing to t ! herein. SPECIFICATIONS MILITARY MIL-M-38510 MIL-H-38534 STANDARDS MILITARY MIL-STD-480 MIL-STD-883 - Microcircuits, General S

28、pecification for. - Hybrid Microcircuits, General Specification for. wing Defense Index of extent specified - - Test Methods and Procedures for Microelectronics. Configuration Control-Engineering Changes, Deviations and Waivers. DEFENSE ELECTRONICS SUPPLY CENTER DAYTON, OHIO 45444 I REVISION LEVEL I

29、 SHEET I I 3 I I I ESC FOFN 193.4, Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-fi;- : W;i-HDBK-780 - Standardized Military Drawings (Copies of the specifications, standards, and handbook required by manufacturers in connection with specific acqui

30、sition functions should be obtained from the contracting activity or as directed by the contracting activity.) 2.2 Order of precedence. In the event of a conflict between the text of this drawing and the reference? cited herein, the text of this drawing shall take precedence. 3. RE3UIREMENTS 3.1 Ite

31、m requirements. The individual item requirements shall be in accordance with MIL-H-38534 and as specified herein. 3.2 Design, construction, and phvsical dimensions. The design, construction, and physical dimensions shall be as specified in MIL-H-38534 and herein. 3.2.1 3.2.2 Terminal connections. 3.

32、2.3 Timing diaqram. 3.3 Electrical performance characteristics. Unless otherwise specified herein, the electrical Case outline(s1. The case outline(s1 shall be in accordance with 1.2.4 htrein and figure 1. The terminal connections shall be as specified on figure 2. The timing diagram shall be as spe

33、cified on figure 3. performance characteristics are as specified in table I and shall apply over the full specified operating temperature range. 3.4 Electrical test requirements. The electrical test requirements shall be the subgroups specified in table II. The electrical tests for each subgroup are

34、 described in table I. 3.5 Marking. Marking shall be in accordance with MIL-H-38534. The part shall be marked with the PIN listed in 1.2 herein. In addition, the manufacturers PIN may also be marked as listed in QML-38534. 3.6 Manufacturer eliaibility. In addition to the general requirements of MIL-

35、H-38534, the manufacturer of the part described herein shall submit for DESC-ECT review and approval, electrical test data (variables format) on 22 devices, from the initial quality conformance inspection group A lot sample, produced on a certified line, for each device type listed herein. The data

36、should also include a summary of all parameters manually tested, and for those which, if any, are guaranteed. 3.7 Certificate of compliance. in order to supply to this drawing. manufacturers product meets the requirements of MIL-H-38534 and the requirements herein. 3.8 Certificate of conformance. ea

37、ch lot of microcircuits delivered to this drawing. A certificate of compliance shall be required from a manufacturer The certificate of compliance submitted to DESC-ECT shall affirm that the A certificate of conformance as required in MIL-H-38534 shall be provided with STANDARD1 ZED MILITARY DRAWING

38、 DEFENSE ELECTRONICS SUPPLY CENTER DAYTON, OHIO 45444 SIZE 5962-90995 A REVISION LEVEL SHEET 1, JUL 91 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-9999996 0055362 782 SIZE STANDARDIZED A MILITARY DRAWING TABLE I. Electrical performance characteri

39、stics. I I I I 5962-90995 Test I REVISION LEVEL Supply currents SHEET 5 Symbol 1 Conditions 11 ;Group A 1 Limits I Unit I -55C s TC,s t125“C I subgroups I I I I I unless otherwise specified I 1 Min 1 Max 1 I I I I 1 I I , 1385 I mA = +5 V, no load, III , , I I I I I 12; 1360 I I 131 1410 1 IC ;+$6 M

40、SPS 2/ . I l I I I I , I , I I , I I I l = -5.2 V, no load, IEE i-“$IIH Output voltage logic low :VOL Output voltage logic highlVoH /IoL = 1 mA I 1,2,3 I 2.4 I I I l , I I I l l I , I l I I I I I I I I VIN = +2.7 V, +Vcc is at maximum I I I I I I I I , I I I I I , I I /IoL = 4 mA I ! I I 1,2,3 I I 0

41、.5 1 V I I I , I L I I 4 I I 1 I I I l I I I I I I I I I , I I I I , I I I I 1 I I I I I I 61 I dBc I I l I 31 distortion 1 10 MSPS z/ I I 161 I 59 I Signal-to-noise and ISNDI I404 kH, FS - 1 dB, I 45 I I I I I Signal-to-noise and ISND2 14.996 MH, FS - 1 dB, distortion I 10 MSPS z/ I I I I I I 1 I 6

42、 157 I I I I I I , I I I I I , I l I 1 I I , L I I I 1 I I ! 1 I Differential linearity IDLE IDC, FS 1 4,5,6 1 I 1 LSB error Integral Linearity error IINL IDC, FS 1 4,5,6 I 14 I I 1 Offset error magnitude :VIO i I I I I I I I I See footnotes at end of table. DEFENSE ELECTRONICS SUPPLY CENTER DAYTON,

43、 OHIO 45444 I I I ESC FORM 193A Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-9999996 0055363 bL9 = SIZE STANDARDIZED A TABLE I. Electrical performance characterlstics - Continued. 1- 1 1 I Test I Syrnbo 1 I Conditions I/ :Group A I Limits I Unit I

44、 I -55C 5 TC.s +125C ; subgroups I I I I I unless otherwise specified I I Min 1 Max : I I , I 4 Gain error 14; i1 I%FS 5962-90995 , I I 8 1 I 161 1 2.7 1 I I , I I I Signal-to-noise ratio ISNRI If = 404 kHz, FS - 1 dB, 10 MSPS 2/ I 4,s 1 65 1 I dB I I I I l 1 1 4 I I 4 1 I J I i 6 164.5 1 I i 6 I 63

45、.5 I I I I t I I I I 1 I I l I I I I I I I I ISNR2 If = 4.996 MHZ, FS - 1 dB, 10 MSPS 21 I 4,s ; 65 I I I l I , I l In-band harmonics IIBHI If = 404 kH, FS - 1 d, 10 MSPS 21 I 4,f; 1-64 1 dEc I ! ! I I I l I I 4 I I I 161 :-60.5 I y I I I I I I I IIEH2 If = 4.996 MH, FS - I dB, 10 MSPS 2/ 1 4 1 1-61

46、.5 I I I I , I I I I I 4 , I I I 1 I I 151 1-60 I I I 161 1-59 I I l I I I I I I I I l , I I 1-63 I dBC Total harmonic dictortionlTHD1 If 404 kHz, FS - 1 dB, 10 MSPS 2/ I 4,s I I I I ! 1 I 1 l 1 I I I I I 4 I J I L 31 16: 1-60 ITHD2 if = 4.996 MH, FS - 1 dB, 10 MSPS 2/ I 4 I 1-60 I 4 15: 1-57 I I 16

47、1 1-58 I I I I I 6 I , I I I I I , I I I , I l , I 4 I I l I l I l , I Spurious free signal ISFSRI If = 404 kMz, FS - 1 dB, 10 MSPS 21 I 4,s I 1-64 i dB I 1 I I I I l 1 I I I l range I I I , 161 i-60.5 I I , ISFSRZ If = 4.996 MHz, FS - 1 dB, 10 MSPS 21 1 4 1 :-61.5 I 151 1-40 I , I l I I I I I I I I

48、 4 I I I I 4 , I , , I 161 1-59 I I 1 I I Missinq codes IMC I l 4,5,6 I 1 O codes + Input voltage +!IINL !Logic low I 1,2,3 1 f 0.8 I V I I , I l I I I I J I l I I I I I I L I I I I l 4 ;+VIN, :Logic high I 1,2,3 I I 0.8 I I , I I , I 4 MILITARY DRAWING I DEFENSE ELECTRONICS SUPPLY CENTER DAYTON, OH

49、IO 45444 I 1 REVISION LEVEL SHEET 6 JUL 91 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-9999996 00553b4 555 SIZE A STANDARDIZED MILITARY DRAWING DEFENSE ELECTRONICS SUPPLY CENTER DAYTON, OHIO 45444 I- 5962-90995 SHEET REVISION LEVEL 7 TABLE I. Electric