DLA SMD-5962-92197 REV B-2013 MICROCIRCUIT DIGITAL ADVANCED CMOS OCTAL BIDIRECTIONAL TRANSCEIVER WITH 8-BIT PARITY GENERATOR CHECKER THREESTATE OUTPUTS TTL COMPATIBLE INPUTS MONOLI.pdf

1、 REVISIONS LTR DESCRIPTION DATE (YR-MO-DA) APPROVED A Update the boilerplate to current requirements as specified in MIL-PRF-38535. Editorial changes throughout. jak 06/10/06 Thomas M. Hess B Updated DC output current (ICC, IGND) in section 1.3, add source of supply information cage 0C7V7. Update th

2、e boilerplate paragraphs to current requirements as specified in MIL-PRF-38535. jwc 13/04/25 Thomas M. Hess REV SHEET REV B B B B B B B B B B B SHEET 15 16 17 18 19 20 21 22 23 24 25 REV STATUS REV B B B B B B B B B B B B B B OF SHEETS SHEET 1 2 3 4 5 6 7 8 9 10 11 12 13 14 PMIC N/A PREPARED BY Wand

3、a L. Meadows DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 http:/www.landandmaritime.dla.mil STANDARD MICROCIRCUIT DRAWING CHECKED BY Thomas J. Ricciuti THIS DRAWING IS AVAILABLE FOR USE BY ALL DEPARTMENTS APPROVED BY Monica L. Poelking MICROCIRCUIT, DIGITAL, ADVANCED CMOS, OCTAL BIDIRECTIONAL TRA

4、NSCEIVER WITH 8-BIT PARITY GENERATOR/CHECKER, THREE-STATE OUTPUTS, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON AND AGENCIES OF THE DEPARTMENT OF DEFENSE DRAWING APPROVAL DATE 93-04-20 AMSC N/A REVISION LEVEL B SIZE A CAGE CODE 67268 5962-92197 SHEET 1 OF 25 DSCC FORM 2233 APR 97 5962-E276-13 Provided

5、by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-92197 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL B SHEET 2 DSCC FORM 2234 APR 97 1. SCOPE 1.1 Scope. This drawing documents two product assurance cla

6、ss levels consisting of high reliability (device classes Q and M) and space application (device class V). A choice of case outlines and lead finishes are available and are reflected in the Part or Identifying Number (PIN). When available, a choice of Radiation Hardness Assurance (RHA) levels is refl

7、ected in the PIN. 1.2 PIN. The PIN is as shown in the following example: 5962 - 92197 01 M K A Federal stock class designator RHA designator (see 1.2.1) Device type (see 1.2.2) Device class designator Case outline (see 1.2.4) Lead finish (see 1.2.5) / (see 1.2.3) / Drawing number 1.2.1 RHA designato

8、r. Device classes Q and V RHA marked devices meet the MIL-PRF-38535 specified RHA levels and are marked with the appropriate RHA designator. Device class M RHA marked devices meet the MIL-PRF-38535, appendix A specified RHA levels and are marked with the appropriate RHA designator. A dash (-) indica

9、tes a non-RHA device. 1.2.2 Device type(s). The device type(s) identify the circuit function as follows: Device type Generic number Circuit function 01 54ACTQ657 Octal bi-directional transceiver with 8-bit parity generator/checker, three-state outputs, TTL compatible inputs 1.2.3 Device class design

10、ator. The device class designator is a single letter identifying the product assurance level as follows: Device class Device requirements documentation M Vendor self-certification to the requirements for MIL-STD-883 compliant, non-JAN class level B microcircuits in accordance with MIL-PRF-38535, app

11、endix A Q or V Certification and qualification to MIL-PRF-38535 1.2.4 Case outline(s). The case outline(s) are as designated in MIL-STD-1835 and as follows: Outline letter Descriptive designator Terminals Package style K GDFP2-F24 or CDFP3-F24 24 Flat pack L GDIP3-T24 or CDIP4-T24 24 Dual-in-line 3

12、CQCC1-N28 28 Square leadless chip carrier 1.2.5 Lead finish. The lead finish is as specified in MIL-PRF-38535 for device classes Q, and V or MIL-PRF-38535, appendix A for device class M. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROC

13、IRCUIT DRAWING SIZE A 5962-92197 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL B SHEET 3 DSCC FORM 2234 APR 97 1.3 Absolute maximum ratings. 1/ 2/ 3/ Supply voltage range (VCC) . -0.5 V dc to +7.0 V dc DC input voltage range (VIN) . -0.5 V dc to VCC + 0.5 V dc DC output voltage rang

14、e (VOUT) -0.5 V dc to VCC+ 0.5 V dc DC input clamp current (IIK) (VIN= -0.5 V and VCC+ 0.5 V) 20 mA DC output clamp current (IOK) (VOUT= -0.5 V and VCC+ 0.5 V) 20 mA DC output current (IOUT) (per output pin) . 50 mA DC VCCor GND current (ICC, IGND) (per pin) 50 mA 4/ Storage temperature range (TSTG)

15、 -65C to +150C Maximum power dissipation (PD) . 500 mW Lead temperature (soldering, 10 seconds) . +300C Thermal resistance, junction-to-case (JC) See MIL-STD-1835 Junction temperature (TJ) . +175C 1.4 Recommended operating conditions. 2/ 3/ Supply voltage range (VCC) . +4.5 V dc to +5.5 V dc Input v

16、oltage range (VIN) . +0.0 V dc to VCC Output voltage range (VOUT) +0.0 V dc to VCCMaximum low level input voltage (VIL ) 0.8 V Minimum high level input voltage (VIH ) . 2.0 V Case operating temperature range (TC) -55C to +125C Minimum input edge rate (V/t): (VINfrom 0.8 V to 2.0 V or from 2.0 V to 0

17、.8 V) 125 mV/ns Maximum high level output current (IOH) -24 mA Maximum low level output current (IOL) . +24 mA 1/ Stresses above the absolute maximum rating may cause permanent damage to the device. Extended operation at the maximum levels may degrade performance and affect reliability. The maximum

18、junction temperature may be exceeded for allowable short duration burn-in screening conditions in accordance with method 5004 of MIL-STD-883. 2/ Unless otherwise noted, all voltages are referenced to GND. 3/ The limits for the parameters specified herein shall apply over the full specified VCCrange

19、and case temperature range of -55C to +125C. 4/ For packages with multiple VCCor GND pins, this value represents the maximum total current flowing into or out of all VCCor GND pins. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUI

20、T DRAWING SIZE A 5962-92197 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL B SHEET 4 DSCC FORM 2234 APR 97 2. APPLICABLE DOCUMENTS 2.1 Government specification, standards, and handbooks. The following specification, standards, and handbooks form a part of this drawing to the extent s

21、pecified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract. DEPARTMENT OF DEFENSE SPECIFICATION MIL-PRF-38535 - Integrated Circuits, Manufacturing, General Specification for. DEPARTMENT OF DEFENSE STANDARDS MIL-STD-883 - Test Method Sta

22、ndard Microcircuits. MIL-STD-1835 - Interface Standard Electronic Component Case Outlines. DEPARTMENT OF DEFENSE HANDBOOKS MIL-HDBK-103 - List of Standard Microcircuit Drawings. MIL-HDBK-780 - Standard Microcircuit Drawings. (Copies of these documents are available online at https:/assist.dla.mil/qu

23、icksearch/ or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.) 2.2 Non-Government publications. The following document(s) form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents

24、 are those cited in the solicitation or contract. JEDEC SOLID STATE TECHNOLOGY ASSOCIATION (JEDEC) JESD78 - IC Latch-Up Test. JESD20 - Standard for Description of 54/74ACXXXX and 54/74ACTXXXX Advanced High-Speed CMOS Devices. (Copies of these documents are available online at http:/www.jedec.org or

25、from JEDEC Solid State Technology Association, 3103 North 10th Street, Suite 240S, Arlington, VA 22201-2701.) 2.3 Order of precedence. In the event of a conflict between the text of this drawing and the references cited herein, the text of this drawing takes precedence. Nothing in this document, how

26、ever, supersedes applicable laws and regulations unless a specific exemption has been obtained. 3. REQUIREMENTS 3.1 Item requirements. The individual item requirements for device classes Q and V shall be in accordance with MIL-PRF-38535 and as specified herein or as modified in the device manufactur

27、ers Quality Management (QM) plan. The modification in the QM plan shall not affect the form, fit, or function as described herein. The individual item requirements for device class M shall be in accordance with MIL-PRF-38535, appendix A for non-JAN class level B devices and as specified herein. 3.2

28、Design, construction, and physical dimensions. The design, construction, and physical dimensions shall be as specified in MIL-PRF-38535 and herein for device classes Q and V or MIL-PRF-38535, appendix A and herein for device class M. 3.2.1 Case outlines. The case outlines shall be in accordance with

29、 1.2.4 herein. 3.2.2 Terminal connections. The terminal connections shall be as specified on figure 1. 3.2.3 Truth table. The truth table shall be as specified on figure 2. 3.2.4 Logic diagram. The logic diagram shall be as specified on figure 3. Provided by IHSNot for ResaleNo reproduction or netwo

30、rking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-92197 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL B SHEET 5 DSCC FORM 2234 APR 97 3.2.5 Ground bounce waveforms and test circuit. The ground bounce waveforms and test circuit shall be as specifi

31、ed on figure 4. 3.2.6 Switching waveforms and test circuit. The switching waveforms and test circuit shall be as specified on figure 5. 3.3 Electrical performance characteristics and postirradiation parameter limits. Unless otherwise specified herein, the electrical performance characteristics and p

32、ostirradiation parameter limits are as specified in table I and shall apply over the full case operating temperature range. 3.4 Electrical test requirements. The electrical test requirements shall be the subgroups specified in table II. The electrical tests for each subgroup are defined in table I.

33、3.5 Marking. The part shall be marked with the PIN listed in 1.2 herein. In addition, the manufacturers PIN may also be marked. For packages where marking of the entire SMD PIN number is not feasible due to space limitations, the manufacturer has the option of not marking the “5962-“ on the device.

34、For RHA product using this option, the RHA designator shall still be marked. Marking for device classes Q and V shall be in accordance with MIL-PRF-38535. Marking for device class M shall be in accordance with MIL-PRF-38535, appendix A. 3.5.1 Certification/compliance mark. The certification mark for

35、 device classes Q and V shall be a “QML“ or “Q“ as required in MIL-PRF-38535. The compliance mark for device class M shall be a “C“ as required in MIL-PRF-38535, appendix A. 3.6 Certificate of compliance. For device classes Q and V, a certificate of compliance shall be required from a QML-38535 list

36、ed manufacturer in order to supply to the requirements of this drawing (see 6.6.1 herein). For device class M, a certificate of compliance shall be required from a manufacturer in order to be listed as an approved source of supply in MIL-HDBK-103 (see 6.6.2 herein). The certificate of compliance sub

37、mitted to DLA Land and Maritime -VA prior to listing as an approved source of supply for this drawing shall affirm that the manufacturers product meets, for device classes Q and V, the requirements of MIL-PRF-38535 and herein or for device class M, the requirements of MIL-PRF-38535, appendix A and h

38、erein. 3.7 Certificate of conformance. A certificate of conformance as required for device classes Q and V in MIL-PRF-38535 or for device class M in MIL-PRF-38535, appendix A shall be provided with each lot of microcircuits delivered to this drawing. 3.8 Notification of change for device class M. Fo

39、r device class M, notification to DLA Land and Maritime -VA of change of product (see 6.2 herein) involving devices acquired to this drawing is required for any change that affects this drawing. 3.9 Verification and review for device class M. For device class M, DLA Land and Maritime, DLA Land and M

40、aritime s agent, and the acquiring activity retain the option to review the manufacturers facility and applicable required documentation. Offshore documentation shall be made available onshore at the option of the reviewer. 3.10 Microcircuit group assignment for device class M. Device class M device

41、s covered by this drawing shall be in microcircuit group number 37 (see MIL-PRF-38535, appendix A). Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-92197 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISI

42、ON LEVEL B SHEET 6 DSCC FORM 2234 APR 97 TABLE I. Electrical performance characteristics. Test and MIL-STD-883 test method 1/ Symbol Test conditions 2/ -55C TC +125C +4.5 V TC +5.5 V unless otherwise specified Device type and device class 3/ VCCGroup A subgroups Limits 4/ Unit Min Max High level out

43、put voltage 3006 VOH1For all inputs affecting output under test, VIN= VIHor VILVIH= 2.0 V, VIL= 0.8 V For all other inputs, VIN= VCCor GND IOH= -50 A All All 4.5 V 1, 2, 3 4.40 V VOH2For all inputs affecting output under test, VIN= VIHor VILVIH= 2.0 V, VIL= 0.8 V For all other inputs, VIN= VCCor GND

44、 IOH= -50 A All All 5.5 V 1, 2, 3 5.40 VOH3For all inputs affecting output under test, VIN= VIHor VILVIH= 2.0 V, VIL= 0.8 V For all other inputs, VIN= VCCor GND IOH= -24 mA All All 4.5 V 1 3.86 2, 3 3.70 VOH4For all inputs affecting output under test, VIN= VIHor VILVIH= 2.0 V, VIL= 0.8 V For all oth

45、er inputs, VIN= VCCor GND IOH= -24 mA All All 5.5 V 1 4.86 2, 3 4.70 VOH55/ For all inputs affecting output under test, VIN= VIHor VILVIH= 2.0 V, VIL= 0.8 V For all other inputs, VIN= VCCor GND IOH= -50 mA All All 5.5 V 1, 2, 3 3.85 See footnotes at end of table. Provided by IHSNot for ResaleNo repr

46、oduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-92197 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL B SHEET 7 DSCC FORM 2234 APR 97 TABLE I. Electrical performance characteristics Continued. Test and MIL-STD-883 test method 1/

47、Symbol Test conditions 2/ -55C TC +125C +4.5 V TC +5.5 V unless otherwise specified Device type and device class 3/ VCCGroup A subgroups Limits 4/ Unit Min Max Low level output voltage 3007 VOL1For all inputs affecting output under test, VIN= VIHor VILVIH= 2.0 V, VIL= 0.8 V For all other inputs, VIN

48、= VCCor GND IOL= 50 A All All 4.5 V 1, 2, 3 0.10 V VOL2For all inputs affecting output under test, VIN= VIHor VILVIH= 2.0 V, VIL= 0.8 V For all other inputs, VIN= VCCor GND IOL= 50 A All All 5.5 V 1, 2, 3 0.10 VOL3For all inputs affecting output under test, VIN= VIHor VILVIH= 2.0 V, VIL= 0.8 V For all other inputs, VIN= VCCor GND IOL= 24 mA All All 4.5 V 1 0.36 2, 3 0.50 VOL4For all inputs affecting output under test, VIN= VIHor VILVIH= 2.0 V, VIL= 0.8 V IOL= 24 mA All All 5.5 V 1 0.36 2, 3 0.50 VOL55/ For all inputs affecting outp