DLA SMD-5962-92216 REV C-2010 MICROCIRCUIT DIGITAL FAST CMOS EIGHT INPUT UNIVERSAL SHIFT REGISTER WITH THREE-STATE OUTPUTS TTL COMPATIBLE INPUTS AND LIMITED OUTPUT VOLTAGE SWING MO.pdf

1、 REVISIONS LTR DESCRIPTION DATE (YR-MO-DA) APPROVED A Changes are in accordance with the notice of revision 5962-R228-96. - bjm 96-09-30 Monica L. Poelking B Redrawn with changes. Update the boilerplate to the current requirements of MIL-PRF-38535. - jak 08-03-12 Thomas M. Hess C Add footnote 12/ fo

2、r test condition of total power supply current (ICCT) to table I. - LTG 10-04-19 Thomas M. Hess REV SHET REV C C C C C SHEET 15 16 17 18 19 REV STATUS REV C C C C C C C C C C C C C C OF SHEETS SHEET 1 2 3 4 5 6 7 8 9 10 11 12 13 14 PMIC N/A PREPARED BY Joseph A. Kerby DEFENSE SUPPLY CENTER COLUMBUS

3、COLUMBUS, OHIO 43218-3990 http:/www.dscc.dla.mil STANDARD MICROCIRCUIT DRAWING THIS DRAWING IS AVAILABLE FOR USE BY ALL DEPARTMENTS AND AGENCIES OF THE DEPARTMENT OF DEFENSE AMSC N/A CHECKED BY Thomas J. Ricciuti APPROVED BY Monica L. Poelking MICROCIRCUIT, DIGITAL, FAST CMOS, EIGHT INPUT UNIVERSAL

4、SHIFT REGISTER WITH THREE-STATE OUTPUTS, TTL COMPATIBLE INPUTS AND LIMITED OUTPUT VOLTAGE SWING, MONOLITHIC SILICON DRAWING APPROVAL DATE 93-08-10 REVISION LEVEL C SIZE A CAGE CODE 67268 5962-92216 SHEET 1 OF 19 DSCC FORM 2233 APR 97 5962-E277-10 Provided by IHSNot for ResaleNo reproduction or netwo

5、rking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-92216 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43218-3990 REVISION LEVEL C SHEET 2 DSCC FORM 2234 APR 97 1. SCOPE 1.1 Scope. This drawing documents two product assurance class levels consisting of high reliab

6、ility (device classes Q and M) and space application (device class V). A choice of case outlines and lead finishes are available and are reflected in the Part or Identifying Number (PIN). When available, a choice of Radiation Hardness Assurance (RHA) levels is reflected in the PIN. 1.2 PIN. The PIN

7、is as shown in the following example: 5962 - 92216 01 M R A Federal stock class designator RHA designator (see 1.2.1) Device type (see 1.2.2)Device class designatorCase outline (see 1.2.4) Leadfinish (see 1.2.5) / (see 1.2.3) / Drawing number 1.2.1 RHA designator. Device classes Q and V RHA marked d

8、evices meet the MIL-PRF-38535 specified RHA levels and are marked with the appropriate RHA designator. Device class M RHA marked devices meet the MIL-PRF-38535, appendix A specified RHA levels and are marked with the appropriate RHA designator. A dash (-) indicates a non-RHA device. 1.2.2 Device typ

9、e(s). The device type(s) identify the circuit function as follows: Device type Generic number Circuit function 01, 02 54FCT299T Eight input universal shift register with three-state outputs, TTL compatible inputs and limited output voltage swing 03, 04 54FCT299AT Eight input universal shift register

10、 with three-state outputs, TTL compatible inputs and limited output voltage swing05, 06 54FCT299CT Eight input universal shift register with three-state outputs, TTL compatible inputs and limited output voltage swing 1.2.3 Device class designator. The device class designator is a single letter ident

11、ifying the product assurance level as follows: Device class Device requirements documentation M Vendor self-certification to the requirements for MIL-STD-883 compliant, non-JAN class level B microcircuits in accordance with MIL-PRF-38535, appendix A Q or V Certification and qualification to MIL-PRF-

12、38535 1.2.4 Case outline(s). The case outline(s) are as designated in MIL-STD-1835 and as follows: Outline letter Descriptive designator Terminals Package style R GDIP1-T20 or CDIP2-T20 20 Dual-in-line S GDFP2-F20 or CDFP3-T20 20 Flat pack 2 CQCC1-N20 20 Leadless-chip-carrier 1.2.5 Lead finish. The

13、lead finish is as specified in MIL-PRF-38535 for device classes Q and V or MIL-PRF-38535, appendix A for device class M. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-92216 DEFENSE SUPPLY CENTER COLUMBUS CO

14、LUMBUS, OHIO 43218-3990 REVISION LEVEL C SHEET 3 DSCC FORM 2234 APR 97 1.3 Absolute maximum ratings. 1/ 2/ 3/ Supply voltage range (VCC) . -0.5 V dc to +7.0 V dc DC input voltage range (VIN) -0.5 V dc to VCC+ 0.5 V dc 4/ DC output voltage range (VOUT) -0.5 V dc to VCC+ 0.5 V dc 4/ DC input clamp cur

15、rent (IIK) (VIN= -0.5 V) . -20 mA DC output clamp current (IOK) (VOUT-0.5 V and +7.0 V) . +50 mA DC output source current (IOH) (per output) -30 mA DC output sink current (IOL) (per output) . +70 mA DC VCCcurrent (ICC) . 316 mA Ground current (IGND) +716 mA Storage temperature range (TSTG) -65C to +

16、150C Case temperature under bias (TBIAS) -65C to +135C Maximum power dissipation (PD) 500 mW Lead temperature (soldering, 10 seconds) . +300C Thermal resistance, junction-to-case (JC) See MIL-STD-1835 Junction temperature (TJ) . +175C 1.4 Recommended operating conditions. 2/ 3/ Supply voltage range

17、(VCC) +4.5 V dc to +5.5 V dc Input voltage range (VIN) +0.0 V dc to VCCOutput voltage range (VOUT) . +0.0 V dc to VCCMaximum low level input voltage (VIL) . 0.8 V Minimum high level input voltage (VIH) . 2.0 V Case operating temperature range (TC) . -55C to +125C Maximum input rise or fall rate (t/V

18、): (from VIN= 0.3 V to 2.7 V, 2.7 V to 0.3 V) 5 ns/V Maximum high level output current (IOH): Device types 01, 03, and 05 . -12 mA Device types 02, 04, and 06 . -6 mA Maximum low level output current (IOL) 32 mA 1/ Stresses above the absolute maximum rating may cause permanent damage to the device.

19、Extended operation at the maximum levels may degrade performance and affect reliability. 2/ Unless otherwise noted, all voltages are referenced to GND. 3/ The limits for the parameters specified herein shall apply over the full specified VCCrange and case temperature range of -55C to +125C. 4/ For V

20、CC 6.5 V, the upper limit on the range is limited to 7.0 V. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-92216 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43218-3990 REVISION LEVEL C SHEET 4 DSCC FORM 22

21、34 APR 97 2. APPLICABLE DOCUMENTS 2.1 Government specification, standards, and handbooks. The following specification, standards, and handbooks form a part of this drawing to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or

22、 contract. DEPARTMENT OF DEFENSE SPECIFICATION MIL-PRF-38535 - Integrated Circuits, Manufacturing, General Specification for. DEPARTMENT OF DEFENSE STANDARDS MIL-STD-883 - Test Method Standard Microcircuits. MIL-STD-1835 - Interface Standard Electronic Component Case Outlines. DEPARTMENT OF DEFENSE

23、HANDBOOKS MIL-HDBK-103 - List of Standard Microcircuit Drawings. MIL-HDBK-780 - Standard Microcircuit Drawings. (Copies of these documents are available online at https:/assist.daps.dla.mil/quicksearch/ or www.dodssp.daps.mil or from the Standardization Document Order Desk, 700 Robbins Avenue, Build

24、ing 4D, Philadelphia, PA 19111-5094.) 2.2 Order of precedence. In the event of a conflict between the text of this drawing and the references cited herein, the text of this drawing takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a specific exemp

25、tion has been obtained. 3. REQUIREMENTS 3.1 Item requirements. The individual item requirements for device classes Q and V shall be in accordance with MIL-PRF-38535 and as specified herein or as modified in the device manufacturers Quality Management (QM) plan. The modification in the QM plan shall

26、not affect the form, fit, or function as described herein. The individual item requirements for device class M shall be in accordance with MIL-PRF-38535, appendix A for non-JAN class level B devices and as specified herein. 3.2 Design, construction, and physical dimensions. The design, construction,

27、 and physical dimensions shall be as specified in MIL-PRF-38535 and herein for device classes Q and V or MIL-PRF-38535, appendix A and herein for device class M. 3.2.1 Case outlines. The case outlines shall be in accordance with 1.2.4 herein. 3.2.2 Terminal connections. The terminal connections shal

28、l be as specified on figure 1. 3.2.3 Truth tables. The truth tables shall be as specified on figure 2. 3.2.4 Logic diagram. The logic diagram shall be as specified on figure 3. 3.2.5 Ground bounce load circuit and waveforms. The ground bounce load circuit and waveforms shall be as specified on figur

29、e 4. 3.2.6 Switching waveforms and test circuit. The switching waveforms and test circuit shall be as specified on figure 5. 3.3 Electrical performance characteristics and postirradiation parameter limits. Unless otherwise specified herein, the electrical performance characteristics and postirradiat

30、ion parameter limits are as specified in table I and shall apply over the full case operating temperature range. 3.4 Electrical test requirements. The electrical test requirements shall be the subgroups specified in table II. The electrical tests for each subgroup are defined in table I. Provided by

31、 IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-92216 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43218-3990 REVISION LEVEL C SHEET 5 DSCC FORM 2234 APR 97 3.5 Marking. The part shall be marked with the PIN listed in

32、1.2 herein. In addition, the manufacturers PIN may also be marked. For packages where marking of the entire SMD PIN number is not feasible due to space limitations, the manufacturer has the option of not marking the “5962-“ on the device. For RHA product using this option, the RHA designator shall s

33、till be marked. Marking for device classes Q and V shall be in accordance with MIL-PRF-38535. Marking for device class M shall be in accordance with MIL-PRF-38535, appendix A. 3.5.1 Certification/compliance mark. The certification mark for device classes Q and V shall be a “QML“ or “Q“ as required i

34、n MIL-PRF-38535. The compliance mark for device class M shall be a “C“ as required in MIL-PRF-38535, appendix A. 3.6 Certificate of compliance. For device classes Q and V, a certificate of compliance shall be required from a QML-38535 listed manufacturer in order to supply to the requirements of thi

35、s drawing (see 6.6.1 herein). For device class M, a certificate of compliance shall be required from a manufacturer in order to be listed as an approved source of supply in MIL-HDBK-103 (see 6.6.2 herein). The certificate of compliance submitted to DSCC-VA prior to listing as an approved source of s

36、upply for this drawing shall affirm that the manufacturers product meets, for device classes Q and V, the requirements of MIL-PRF-38535 and herein or for device class M, the requirements of MIL-PRF-38535, appendix A and herein. 3.7 Certificate of conformance. A certificate of conformance as required

37、 for device classes Q and V in MIL-PRF-38535 or for device class M in MIL-PRF-38535, appendix A shall be provided with each lot of microcircuits delivered to this drawing. 3.8 Notification of change for device class M. For device class M, notification to DSCC-VA of change of product (see 6.2 herein)

38、 involving devices acquired to this drawing is required for any change that affects this drawing. 3.9 Verification and review for device class M. For device class M, DSCC, DSCCs agent, and the acquiring activity retain the option to review the manufacturers facility and applicable required documenta

39、tion. Offshore documentation shall be made available onshore at the option of the reviewer. 3.10 Microcircuit group assignment for device class M. Device class M devices covered by this drawing shall be in microcircuit group number 40 (see MIL-PRF-38535, appendix A). Provided by IHSNot for ResaleNo

40、reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-92216 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43218-3990 REVISION LEVEL C SHEET 6 DSCC FORM 2234 APR 97 TABLE I. Electrical performance characteristics. Test and MIL-STD-883 test method

41、1/ Symbol Test conditions 2/ -55C TC +125C +4.5 V VCC +5.5 V unless otherwise specified Device type VCCGroup A subgroups Limits 3/ Unit Min Max High level output voltage 3006 VOH14/ For all inputs affecting output under test VIN= VIH= 2.0 V or VIL= 0.8 V For all other inputs VIN= VCCor GND IOH= -300

42、 A 01, 03, 05 4.5 V 1, 2, 3 3.0 VCC-0.5 V 02, 04, 06 2.7 VCC-0.5VOH2For all inputs affecting output under test VIN= VIH= 2.0 V or VIL=0.8 VFor all other inputs VIN= VCCor GND IOH= -12 mA 01, 03, 05 4.5 V 1, 2, 3 2.4 VCC-0.5 V IOH= -6 mA 02, 04, 06 2.4 VCC-0.5IOH= -12 mA 2.0 VCC-0.5Low level output v

43、oltage 3007 VOL14/ For all inputs affecting output under test VIN= VIH= 2.0 V or VIL= 0.8 V For all other inputs VIN= VCCor GND IOL= 300 A All 4.5 V 1, 2, 3 0.20 V VOL2For all inputs affecting output under test VINVIH= 2.0 V or VIL= 0.8 V For all other inputs VIN= VCCor GND IOL= 32 mA All 4.5 V 1, 2

44、, 3 0.55 V Three-state output leakage current high 3021 IOZH5/ 6/ OEn = VIHor VILVIH= 2.0 V VIL= 0.8 V For all other inputs VIN= VCCor GND VOUT= VCC01, 03, 05 5.5 V 1, 2 0.1 A 3 2.0 02, 04, 06 1, 2 1.0 3 10.0 Three-state output leakage current low 3020 IOZL5/ 6/ OEn = VIHor VILVIH= 2.0 V VIL= 0.8 V

45、For all other inputs VIN= VCCor GND VOUT= GND 01, 03, 05 5.5 V 1, 2 -0.1 A 3 -2.0 02, 04, 06 1, 2 -1.0 3 -10.0 Negative input clamp voltage 3022 VIC-For input under test, IIN= -15 mA 01, 03, 05 4.5 V 1, 2, 3 -1.2 V For input under test, IIN= -18 mA 02, 04, 06 -1.3 Input current high 3010 IIHFor inpu

46、t under test, VIN= VCCFor all other inputs, VIN= VCCor GND 01, 03, 05 5.5 V 1, 2 0.1 A 3 1.0 02, 04, 06 1, 2 1.0 3 5.0 Input current low 3009 IILFor input under test, VIN= GND For all other inputs, VIN= VCCor GND 01, 03, 05 5.5 V 1, 2 -0.1 A 3 -1.0 02, 04, 06 1, 2 -1.0 3 -5.0 Input capacitance 3012

47、CIN7/ See 4.4.1c TC= +25C All GND 4 10 pF Output capacitance 3012 COUT7/ See 4.4.1c TC= +25C All GND 4 12 pF See footnotes at end of table. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-92216 DEFENSE SUPPLY

48、 CENTER COLUMBUS COLUMBUS, OHIO 43218-3990 REVISION LEVEL C SHEET 7 DSCC FORM 2234 APR 97 TABLE I. Electrical performance characteristics - Continued. Test and MIL-STD-883 test method 1/ Symbol Test conditions 2/ -55C TC +125C +4.5 V VCC +5.5 V unless otherwise specified Devicetype VCCGroup A subgroups Limits 3/ Unit Min Max Short circuit output current 3005 IOS8/ For all inputs, VIN= VCCor GND VOUT= GND All 5.5 V 1, 2, 3 -60 -225 mA Dynamic power supply current ICCD4/ 9/ Outputs open All 5.5 V 4, 5, 6 0.25 mA/ MHzBitQuiescent supply current delta, TTL input level 3005 ICC10/ For inp