DLA SMD-5962-94622 REV A-2011 MICROCIRCUIT LINEAR LAMP DRIVER FLUORESCENT MONOLITHIC SILICON.pdf

1、 REVISIONS LTR DESCRIPTION DATE (YR-MO-DA) APPROVED A Redraw. Update drawing to current requirements. - drw 11-12-12 Charles F. Saffle REV SHET REV SHET REV STATUS REV A A A A A A A A A A A A OF SHEETS SHEET 1 2 3 4 5 6 7 8 9 10 11 12 PMIC N/A PREPARED BY Dan Wonnell DLA LAND AND MARITIME COLUMBUS,

2、OHIO 43218-3990 http:/www.landandmaritime.dla.mil STANDARD MICROCIRCUIT DRAWING THIS DRAWING IS AVAILABLE FOR USE BY ALL DEPARTMENTS AND AGENCIES OF THE DEPARTMENT OF DEFENSE CHECKED BY Sandra Rooney APPROVED BY Michael A. Frye MICROCIRCUIT, LINEAR, LAMP DRIVER, FLUORESCENT, MONOLITHIC SILICON DRAWI

3、NG APPROVAL DATE 94-12-01 AMSC N/A REVISION LEVEL A SIZE A CAGE CODE 67268 5962-94622 SHEET 1 OF 12 DSCC FORM 2233 APR 97 5962-E025-12 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-94622 DLA LAND AND MARITI

4、ME COLUMBUS, OHIO 43218-3990 REVISION LEVEL A SHEET 2 DSCC FORM 2234 APR 97 1. SCOPE 1.1 Scope. This drawing documents two product assurance class levels consisting of high reliability (device classes Q and M) and space application (device class V). A choice of case outlines and lead finishes are av

5、ailable and are reflected in the Part or Identifying Number (PIN). When available, a choice of Radiation Hardness Assurance (RHA) levels is reflected in the PIN. 1.2 PIN. The PIN is as shown in the following example: 5962 - 94622 01 Q V A Federal stock class designator RHA designator (see 1.2.1) Dev

6、ice type (see 1.2.2)Device class designatorCase outline (see 1.2.4) Leadfinish (see 1.2.5) / (see 1.2.3) / Drawing number 1.2.1 RHA designator. Device classes Q and V RHA marked devices meet the MIL-PRF-38535 specified RHA levels and are marked with the appropriate RHA designator. Device class M RHA

7、 marked devices meet the MIL-PRF-38535, appendix A specified RHA levels and are marked with the appropriate RHA designator. A dash (-) indicates a non-RHA device. 1.2.2 Device type. The device type identifies the circuit function as follows: Device type Generic number Circuit function 01 UC1871 Reso

8、nant fluorescent lamp driver 1.2.3 Device class designator. The device class designator is a single letter identifying the product assurance level as follows: Device class Device requirements documentation M Vendor self-certification to the requirements for MIL-STD-883 compliant, non-JAN class level

9、 B microcircuits in accordance with MIL-PRF-38535, appendix A Q or V Certification and qualification to MIL-PRF-38535 1.2.4 Case outlines. The case outlines are as designated in MIL-STD-1835 as follows: Outline letter Descriptive designator Terminals Package style V GDIP1-T18 or CDIP-T18 18 Dual-in-

10、line 2 CQCC1-N20 20 Square leadless chip carrier 1.2.5 Lead finish. The lead finish is as specified in MIL-PRF-38535 for device classes Q and V or MIL-PRF-38535, appendix A for device class M. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD

11、MICROCIRCUIT DRAWING SIZE A 5962-94622 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL A SHEET 3 DSCC FORM 2234 APR 97 1.3 Absolute maximum ratings. 1/ Analog inputs . +10 V dc Zero detect . +20 V dc Power dissipation (PD), TA= +25C . 1 W Storage temperature range -65C to +150C Lead t

12、emperature . +300C 1.4 Recommended operating conditions. VCC. +5 V dc VC. +15 V dc VENABLE. +5 V dc Ambient operating temperature range (TA) -55C to +125C 2. APPLICABLE DOCUMENTS 2.1 Government specification, standards, and handbooks. The following specification, standards, and handbooks form a part

13、 of this drawing to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract. DEPARTMENT OF DEFENSE SPECIFICATION MIL-PRF-38535 - Integrated Circuits, Manufacturing, General Specification for. DEPARTMENT OF DEFENSE STANDAR

14、DS MIL-STD-883 - Test Method Standard Microcircuits. MIL-STD-1835 - Interface Standard Electronic Component Case Outlines. DEPARTMENT OF DEFENSE HANDBOOKS MIL-HDBK-103 - List of Standard Microcircuit Drawings. MIL-HDBK-780 - Standard Microcircuit Drawings. (Copies of these documents are available on

15、line at https:/assist.daps.dla.mil/quicksearch/ or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.) 2.2 Order of precedence. In the event of a conflict between the text of this drawing and the references cited herein, the text of this drawi

16、ng takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained. _ 1/ Stresses above the absolute maximum rating may cause permanent damage to the device. Extended operation at the maximum levels may degrade performance

17、 and affect reliability. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-94622 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL A SHEET 4 DSCC FORM 2234 APR 97 3. REQUIREMENTS 3.1 Item requireme

18、nts. The individual item requirements for device classes Q and V shall be in accordance with MIL-PRF-38535 as specified herein, or as modified in the device manufacturers Quality Management (QM) plan. The modification in the QM plan shall not affect the form, fit, or function as described herein. Th

19、e individual item requirements for device class M shall be in accordance with MIL-PRF-38535, appendix A for non-JAN class level B devices and as specified herein. 3.2 Design, construction, and physical dimensions. The design, construction, and physical dimensions shall be as specified in MIL-PRF-385

20、35 and herein for device classes Q and V or MIL-PRF-38535, appendix A and herein for device class M. 3.2.1 Case outlines. The case outlines shall be in accordance with 1.2.4 herein. 3.2.2 Terminal connections. The terminal connections shall be as specified on figure 1. 3.3 Electrical performance cha

21、racteristics and postirradiation parameter limits. Unless otherwise specified herein, the electrical performance characteristics and postirradiation parameter limits are as specified in table I and shall apply over the full ambient operating temperature range. 3.4 Electrical test requirements. The e

22、lectrical test requirements shall be the subgroups specified in table II. The electrical tests for each subgroup are defined in table I. 3.5 Marking. The part shall be marked with the PIN listed in 1.2 herein. In addition, the manufacturers PIN may also be marked. For packages where marking of the e

23、ntire SMD PIN number is not feasible due to space limitations, the manufacturer has the option of not marking the “5962-“ on the device. For RHA product using this option, the RHA designator shall still be marked. Marking for device classes Q and V shall be in accordance with MIL-PRF-38535. Marking

24、for device class M shall be in accordance with MIL-PRF-38535, appendix A. 3.5.1 Certification/compliance mark. The certification mark for device classes Q and V shall be a “QML“ or “Q“ as required in MIL-PRF-38535. The compliance mark for device class M shall be a “C“ as required in MIL-PRF-38535, a

25、ppendix A. 3.6 Certificate of compliance. For device classes Q and V, a certificate of compliance shall be required from a QML-38535 listed manufacturer in order to supply to the requirements of this drawing (see 6.6.1 herein). For device class M, a certificate of compliance shall be required from a

26、 manufacturer in order to be listed as an approved source of supply in MIL-HDBK-103 (see 6.6.2 herein). The certificate of compliance submitted to DLA Land and Maritime-VA prior to listing as an approved source of supply for this drawing shall affirm that the manufacturers product meets, for device

27、classes Q and V, the requirements of MIL-PRF-38535 and herein or for device class M, the requirements of MIL-PRF-38535, appendix A and herein. 3.7 Certificate of conformance. A certificate of conformance as required for device classes Q and V in MIL-PRF-38535 or for device class M in MIL-PRF-38535,

28、appendix A shall be provided with each lot of microcircuits delivered to this drawing. 3.8 Notification of change for device class M. For device class M, notification to DLA Land and Maritime -VA of change of product (see 6.2 herein) involving devices acquired to this drawing is required for any cha

29、nge that affects this drawing. 3.9 Verification and review for device class M. For device class M, DLA Land and Maritime, DLA Land and Maritimes agent, and the acquiring activity retain the option to review the manufacturers facility and applicable required documentation. Offshore documentation shal

30、l be made available onshore at the option of the reviewer. 3.10 Microcircuit group assignment for device class M. Device class M devices covered by this drawing shall be in microcircuit group number 89 (see MIL-PRF-38535, appendix A). Provided by IHSNot for ResaleNo reproduction or networking permit

31、ted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-94622 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL A SHEET 5 DSCC FORM 2234 APR 97 TABLE I. Electrical performance characteristics. Test Symbol Conditions 1/ -55C TA+125C VCC= +5 V, VC= +15 V, CT= 1 nF, VENA

32、BLE= +5 V, Zero Det = +1 V Group A subgroupsDevice type Limits Unit unless otherwise specified Min Max Reference section Output voltage VO1, 2, 3 01 2.940 3.060 V Line regulation VRLNVCC= 4.75 V to 18 V 1, 2, 3 01 10 mV Load regulation VRLDIO= 0 to -5 mA 1, 2, 3 01 10 mV Oscillator section Free runn

33、ing frequency fFRTA= +25C 4 01 57 78 kHz Max sync frequency fMSTA= +25C 4 01 160 240 kHz Charge current ICHVCT= 1.5 V 1, 2, 3 01 180 220 A Voltage stability VSTAB1, 2, 3 01 2 % Temperature stability TSTAB1, 2, 3 01 8 % Zero defect threshold VTHZD1, 2, 3 01 0.46 0.56 V Error amp 1 section Input volta

34、ge VINVO= 2 V 1, 2, 3 01 1.445 1.505 V Input bias current IIB1, 2, 3 01 -2 A Open loop gain AOLVO= 0.5 to 3 V 1, 2, 3 01 65 dB Output high voltage VOHVEA(-)= 1.3 V 1, 2, 3 01 3.1 3.9 V Output low voltage VOLVEA(-)= 1.7 V 1, 2, 3 01 0.2 V Common mode range CMR 1, 2, 3 01 0 VIN- 1 V See footnotes at e

35、nd of table. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-94622 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL A SHEET 6 DSCC FORM 2234 APR 97 TABLE I. Electrical performance characteristic

36、s - continued. Test Symbol Conditions 1/ -55C TA+125C VCC= +5 V, VC= +15 V, CT= 1 nF, VENABLE= +5 V, Zero Det = +1 V Group A subgroupsDevice type Limits Unit unless otherwise specified Min Max Error amp 1 section - continued Output source current ISOURCEVEA(-)= 1.3 V, VO= 2 V 1, 2, 3 01 -350 A Outpu

37、t sink current ISINKVEA(-)= 1.7 V, VO= 2 V 1, 2, 3 01 10 mA Open lamp detect section Soft start threshold VTHSSVEA(-)= 0 V 1, 2, 3 01 2.9 3.8 V Error amp threshold VTHEAVSS= 4.2 V 1, 2, 3 01 0.3 0.7 V Soft start current ISTVSS= 2 V 1, 2, 3 01 10 40 A Error amp 2 section Input offset voltage VIOVO= 2

38、 V 1, 2, 3 01 10 mV Input bias current IIB1, 2, 3 01 -1 A Input offset current IIO1, 2, 3 01 0.5 A Open loop gain AOLVO= 0,5 to 3 V 1, 2, 3 01 65 dB Output high voltage VOHVID= 100 mV, VO= 2 V 1, 2, 3 01 3.6 4.4 V Output low voltage VOLVID= -100 mV, VO= 2 V 1, 2, 3 01 0.2 V Output source current ISO

39、URCEVID= 100 mV, VO= 2 V 1, 2, 3 01 -350 A Output sink current ISINKVID= -100 mV, VO= 2 V 1, 2, 3 01 10 mA Common mode range CMR 1, 2, 3 01 0 VIN- 2 V See footnotes at end of table. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUI

40、T DRAWING SIZE A 5962-94622 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL A SHEET 7 DSCC FORM 2234 APR 97 TABLE I. Electrical performance characteristics - continued. Test Symbol Conditions 1/ -55C TA+125C VCC= +5 V, VC= +15 V, CT= 1 nF, VENABLE= +5 V, Zero Det = +1 V Group A subgro

41、upsDevice type Limits Unit unless otherwise specified Min Max ISENSEsection Threshold voltage VTH1, 2, 3 01 0.475 0.575 V Output section Output low level voltage VOLIOUT= 0, outputs A and B 1, 2, 3 01 0.2 V IOUT= 10 mA 0.4 OUT= 100 mA 2.2 Output high level voltage VOHIOUT= 0, outputs C and D 1, 2, 3

42、 01 14.7 V IOUT= -10 mA 13.5 OUT= -100 mA 12.5 Rise time 2/ tRCL= 1 nF, TA= 25C 9 01 80 ns Fall time 2/ tFCL= 1 nF, TA= 25C 9 01 80 ns Output dynamics Out A and B duty cycle OAB4, 5, 6 01 48 50 % Out C max duty cycle OCMAXVEA1(-)= 1 V 4, 5, 6 01 100 % Out C min duty cycle OCMINVEA1(-)= 2 V 4, 5, 6 0

43、1 0 % Out D max duty cycle ODMAXVEA2(+ )- VEA2(-)= 100 mV 4, 5, 6 01 96 % Out D min duty cycle ODMINVEA2(+ )- VEA2(-)= -100 mV 4, 5, 6 01 0 % See footnotes at end of table. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING

44、 SIZE A 5962-94622 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL A SHEET 8 DSCC FORM 2234 APR 97 TABLE I. Electrical performance characteristics - continued. Test Symbol Conditions 1/ -55C TA+125C VCC= +5 V, VC= +15 V, CT= 1 nF, VENABLE= +5 V, Zero Det = +1 V Group A subgroupsDevice

45、 type Limits Unit unless otherwise specified Min Max Under voltage lockout section Start-up threshold VTHSU1, 2, 3 01 3.7 4.5 V Hysteresis VHYS1, 2, 3 01 120 280 mV Enable section Input high threshold VTHIH1, 2, 3 01 2 V Input low threshold VTHIL1, 2, 3 01 0.8 V Input current IINVENABLE= 5 V 1, 2, 3

46、 01 400 A Supply current section VCCsupply current ICCVCC= 20 V 1, 2, 3 01 14 mA VCsupply current ICVC= 20 V 1, 2, 3 01 12 mA ICCdisabled ICCDISVCC= 20 V, VENABLE= 0 V 1, 2, 3 01 10 A 1/ Unless otherwise specified, all voltages are with respect to ground. Currents are positive into, and negative out

47、 of the specified terminal. 2/ This parameter is guaranteed by design but not tested. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-94622 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL A SHE

48、ET 9 DSCC FORM 2234 APR 97 Device type 01 Case outline V 2 Terminal number Terminal symbol 1 Enable GND 2 Flyback ISENSEB Out 3 D Out A Out 4 C Out VC5 GND EA1 Out 6 B Out Soft Start 7 A Out EA1(-) 8 VCN/C 9 EA1 Out CT10 Soft Start Zero Detect 11 EA1(-) N/C 12 CTVREF13 Zero Detect EA2(+) 14 VREFEA2(-) 15 EA2(+) EA2 Out 16 EA2(-) VIN17 EA2 Out Enable 18 VINFlyback ISENSE19 - - - D Out 20 - - - C Out N/C = no connect FIGURE 1. Terminal connections. Provided by IHSNot for