DLA SMD-5962-94703 REV B-2002 MICROCIRCUIT LINEAR ANALOG-TO-DIGITAL CONVERTER DUAL 8-BIT 50 MSPS MONOLITHIC SILICON《双8-BIT 50 MSPS的数字到类似体转换器硅单片电路线型微电路》.pdf

1、 REVISIONS LTR DESCRIPTION DATE (YR-MO-DA) APPROVED A Add case outline Z. Changes to table I. Drawing updated to reflect current requirements. - drw 02-02-26 Raymond Monnin B Delete case outline Z. Sheet 2, 1.2.4, add MIL-STD-1835 descriptive designator for case outline Y. - drw 02-06-27 Raymond Mon

2、nin REV SHET REV SHET REV STATUS REV B B B B B B B B B B B OF SHEETS SHEET 1 2 3 4 5 6 7 8 9 10 11 PMIC N/A PREPARED BY Dan Wonnell DEFENSE SUPPLY CENTER COLUMBUS STANDARD MICROCIRCUIT DRAWING CHECKED BY Sandra Rooney COLUMBUS, OHIO 43216 http:/www.dscc.dla.mil THIS DRAWING IS AVAILABLE FOR USE BY A

3、LL DEPARTMENTS APPROVED BY Michael A. Frye MICROCIRCUIT, LINEAR, ANALOG-TO-DIGITAL CONVERTER, DUAL 8-BIT, 50 MSPS, AND AGENCIES OF THE DEPARTMENT OF DEFENSE DRAWING APPROVAL DATE 94-11-04 MONOLITHIC SILICON AMSC N/A REVISION LEVEL B SIZE A CAGE CODE 67268 5962-94703 SHEET 1 OF 11 DSCC FORM 2233 APR

4、97 5962-E434-02 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-94703 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43216-5000

5、REVISION LEVEL B SHEET 2 DSCC FORM 2234 APR 97 1. SCOPE 1.1 Scope. This drawing documents two product assurance class levels consisting of high reliability (device classes Q and M) and space application (device class V). A choice of case outlines and lead finishes are available and are reflected in

6、the Part or Identifying Number (PIN). When available, a choice of Radiation Hardness Assurance (RHA) levels are reflected in the PIN. 1.2 PIN. The PIN is as shown in the following example: 5962 - 94703 01 M X A Federal stock class designator RHA designator (see 1.2.1) Devicetype (see 1.2.2) Device c

7、lass designator Caseoutline (see 1.2.4) Lead finish (see 1.2.5) / (see 1.2.3) / Drawing number 1.2.1 RHA designator. Device classes Q and V RHA marked devices meet the MIL-PRF-38535 specified RHA levels and are marked with the appropriate RHA designator. Device class M RHA marked devices meet the MI

8、L-PRF-38535, appendix A specified RHA levels and are marked with the appropriate RHA designator. A dash (-) indicates a non-RHA device. 1.2.2 Device type. The device type identify the circuit function as follows: Device type Generic number Circuit function 01 AD9058T Dual 8-bit analog-to-digital con

9、verter 1.2.3 Device class designator. The device class designator is a single letter identifying the product assurance level as follows: Device class Device requirements documentation M Vendor self-certification to the requirements for MIL-STD-883 compliant, non-JAN class level B microcircuits in ac

10、cordance with MIL-PRF-38535, appendix A Q or V Certification and qualification to MIL-PRF-38535 1.2.4 Case outlines. The case outlines are as designated in MIL-STD-1835 and as follows: Outline letter Descriptive designator Terminals Package style X GDIP1-T48 or CDIP2-T48 48 Dual-in-line Y CQCC2-J44

11、44 “J” lead chip carrier 1.2.5 Lead finish. The lead finish is as specified in MIL-PRF-38535 for device classes Q and V or MIL-PRF-38535, appendix A for device class M. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZ

12、E A 5962-94703 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43216-5000 REVISION LEVEL B SHEET 3 DSCC FORM 2234 APR 97 1.3 Absolute maximum ratings. 1/ Positive supply voltage (+VS) +6 V dc Negative supply voltage (-VS) . +0.8 V dc to -6 V dc Analog input . -1.5 V dc to +2.5 V dc Digital inputs . -0

13、.5 V dc to +VS Digital output current 20 mA Voltage reference current . 53 mA Positive voltage reference (+VREF) . +2.5 V dc Negative voltage reference (-VREF) . -1.5 V dc Junction temperature (TJ) +175C Case storage temperature range . -65C to +150C Lead temperature (soldering, 10 seconds) +300C Th

14、ermal resistance, junction-to-ambient (JA): Case outline X . 40C/W Case outline Y . 86.4C/W Thermal resistance, junction-to-ambient (JC): Case outline X . 12C/W Case outline Y . 24.9C/W 1.4 Recommended operating conditions. Supply voltage (VS) . 5 V dc Analog input voltage range (AIN) 0 V dc to 2 V

15、dc Case operating temperature range (TC) . -55C to +125C 2. APPLICABLE DOCUMENTS 2.1 Government specification, standards, and handbooks. The following specification, standards, and handbooks form a part of this drawing to the extent specified herein. Unless otherwise specified, the issues of these d

16、ocuments are those listed in the issue of the Department of Defense Index of Specifications and Standards (DoDISS) and supplement thereto, cited in the solicitation. SPECIFICATION DEPARTMENT OF DEFENSE MIL-PRF-38535 - Integrated Circuits, Manufacturing, General Specification for. STANDARDS DEPARTMEN

17、T OF DEFENSE MIL-STD-883 - Test Method Standard Microcircuits. MIL-STD-1835 - Interface Standard Electronic Component Case Outlines. HANDBOOKS DEPARTMENT OF DEFENSE MIL-HDBK-103 - List of Standard Microcircuit Drawings. MIL-HDBK-780 - Standard Microcircuit Drawings. _ 1/ Stresses above the absolute

18、maximum rating may cause permanent damage to the device. Extended operation at the maximum levels may degrade performance and affect reliability. For application in which +VS may be applied before VS, or +VS current is not limited to 500 mA, a reverse-biased clamping diode should be inserted between

19、 ground and VS to prevent destructive latch up. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-94703 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43216-5000 REVISION LEVEL B SHEET 4 DSCC FORM 2234 APR 97 (U

20、nless otherwise indicated, copies of the specification, standards, and handbooks are available from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.) 2.2 Order of precedence. In the event of a conflict between the text of this drawing and the ref

21、erences cited herein, the text of this drawing takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained. 3. REQUIREMENTS 3.1 Item requirements. The individual item requirements for device classes Q and V shall be in

22、 accordance with MIL-PRF-38535 and as specified herein or as modified in the device manufacturers Quality Management (QM) plan. The modification in the QM plan shall not affect the form, fit, or function as described herein. The individual item requirements for device class M shall be in accordance

23、with MIL-PRF-38535, appendix A for non-JAN class level B devices and as specified herein. 3.2 Design, construction, and physical dimensions. The design, construction, and physical dimensions shall be as specified in MIL-PRF-38535 and herein for device classes Q and V or MIL-PRF-38535, appendix A and

24、 herein for device class M. 3.2.1 Case outlines. The case outlines shall be in accordance with 1.2.4 herein. 3.2.2 Terminal connections. The terminal connections shall be as specified on figure 1. 3.3 Electrical performance characteristics and post irradiation parameter limits. Unless otherwise spec

25、ified herein, the electrical performance characteristics and post irradiation parameter limits are as specified in table I and shall apply over the full case operating temperature range. 3.4 Electrical test requirements. The electrical test requirements shall be the subgroups specified in table II.

26、The electrical tests for each subgroup are defined in table I. 3.5 Marking. The part shall be marked with the PIN listed in 1.2 herein. In addition, the manufacturers PIN may also be marked as listed in MIL-HDBK-103. For packages where marking of the entire SMD PIN number is not feasible due to spac

27、e limitations, the manufacturer has the option of not marking the “5962-“ on the device. For RHA product using this option, the RHA designator shall still be marked. Marking for device classes Q and V shall be in accordance with MIL-PRF-38535. Marking for device class M shall be in accordance with M

28、IL-PRF-38535, appendix A. 3.5.1 Certification/compliance mark. The certification mark for device classes Q and V shall be a “QML“ or “Q“ as required in MIL-PRF-38535. The compliance mark for device class M shall be a “C“ as required in MIL-PRF-38535, appendix A. 3.6 Certificate of compliance. For de

29、vice classes Q and V, a certificate of compliance shall be required from a QML-38535 listed manufacturer in order to supply to the requirements of this drawing (see 6.6.1 herein). For device class M, a certificate of compliance shall be required from a manufacturer in order to be listed as an approv

30、ed source of supply in MIL-HDBK-103 (see 6.6.2 herein). The certificate of compliance submitted to DSCC-VA prior to listing as an approved source of supply for this drawing shall affirm that the manufacturers product meets, for device classes Q and V, the requirements of MIL-PRF-38535 and herein or

31、for device class M, the requirements of MIL-PRF-38535, appendix A and herein. 3.7 Certificate of conformance. A certificate of conformance as required for device classes Q and V in MIL-PRF-38535 or for device class M in MIL-PRF-38535, appendix A shall be provided with each lot of microcircuits deliv

32、ered to this drawing. 3.8 Notification of change for device class M. For device class M, notification to DSCC-VA of change of product (see 6.2 herein) involving devices acquired to this drawing is required for any change as defined in MIL-PRF-38535, appendix A. 3.9 Verification and review for device

33、 class M. For device class M, DSCC, DSCCs agent, and the acquiring activity retain the option to review the manufacturers facility and applicable required documentation. Offshore documentation shall be made available onshore at the option of the reviewer. 3.10 Microcircuit group assignment for devic

34、e class M. Device class M devices covered by this drawing shall be in microcircuit group number 57 (see MIL-PRF-38535, appendix A). Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-94703 DEFENSE SUPPLY CENTER

35、COLUMBUS COLUMBUS, OHIO 43216-5000 REVISION LEVEL B SHEET 5 DSCC FORM 2234 APR 97 TABLE I. Electrical performance characteristics. Test Symbol Conditions 1/ -55C TC +125C unless otherwise specified Group A subgroups Device type Limits Unit Min MaxDifferential nonlinearity DNL 7 01 0.5 LSB 8 1.0 Inte

36、gral nonlinearity INL 7 01 1.0 LSB 8 1.25 Input bias current IB1 01 170 A 2, 3 340 Input resistance RI1 01 12 k Input capacitance 2/ CIAIN= 0 V, see 4.4.1c 4 01 15 pF Reference ladder resistance RRL1 01 120 220 2, 3 80 270 Reference ladder offset (top) ORLT1 01 16 mV2, 3 24 Reference ladder offset (

37、bottom) ORLB1 01 23 mV2, 3 33 Reference voltage VREF1 01 1.95 2.2 V 2, 3 1.90 2.25 Power supply rejection ratio PSRR 1 01 25 mV/V Maximum conversion rate CONV 4 01 50 Msps Output delay (valid) tV2 k pulldowns 9 01 5 ns Aperture delay 2/ tA9 01 0.1 1.5 nsAperture delay matching 2/ tAM01 0. nsPropagat

38、ion delay tPD2 k pulldowns 9 01 19 ns See footnotes at end of table. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-94703 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43216-5000 REVISION LEVEL B SHEET 6 DSC

39、C FORM 2234 APR 97 TABLE I. Electrical performance characteristics - continued. Test Symbol Conditions 1/ -55C TC +125C unless otherwise specified Group A subgroups Device type Limits Unit Min MaxEncode pulse voltage (high) VEH2/ 1 01 2.0 V Encode pulse voltage (low) VEL2/ 01 0.8 Encode pulse curren

40、t (high) IEH1, 2, 3 01 300 A Encode pulse current (low) IEL1, 2, 3 01 500 A Effective number of bits ENOB AIN= 2.3 MHz case X 4 01 6.9 Bits 3/ case Y 7.2 IN= 10.3 MHz case X 6.8 / case Y 7.1 Signal-to-noise ratio SNR AIN= 2.3 MHz case X 4 01 44 dB 3/ case Y 45 IN= 10.3 MHz case X 43 / case Y 44 AIN=

41、 2.3 MHz case X 41 50 Msps 3/ encode Case Y 42 IN= 2.3 MHz case X 44 8 ns HIGH 3/ encode Case Y 45 AIN= 2.3 MHz case X 44 8 ns LOW 3/ encode Case Y 45 2 nd harmonic distortion HD2AIN= 2.3 MHz, 10.3 MHz 4 01 48 dBc 3 rd harmonic distortion HD3AIN= 2.3 MHz, 10.3 MHz 4 01 50 dBc Crosstalk rejection 2/

42、CR AIN= 2.3, 3.5 MHz, 40 Msps 4 01 48 dBc See footnotes at end of table. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-94703 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43216-5000 REVISION LEVEL B SHEET 7

43、 DSCC FORM 2234 APR 97 TABLE I. Electrical performance characteristics - continued. Test Symbol Conditions 1/ -55C TC +125C unless otherwise specified Group A subgroups Device type Limits Unit Min MaxHigh level output voltage VOH1, 2, 3 01 2.4 V Low level output voltage VOL1, 2, 3 01 0.4 V Positive

44、supply current +IS1, 2, 3 01 167 mA Negative supply current -IS1, 2, 3 01 41 mA Power dissipation 4/ PD1, 2, 3 01 1040 mW 1/ VS= 5 V; +VREF= +2 V (internal); -VREF= GROUND; ENCODE = 40 Msps; AIN= 0 V to +2 V. 2/ Test limit is characterized and is guaranteed at TC= +25C but not tested. 3/ Measured wi

45、th analog input signal 1 dB below full scale at specified frequency. 4/ Test limit applies to both A/Ds and includes ladder dissipation. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-94703 DEFENSE SUPPLY CE

46、NTER COLUMBUS COLUMBUS, OHIO 43216-5000 REVISION LEVEL B SHEET 8 DSCC FORM 2234 APR 97 Device type 01 Device type 01 Case outlines X Y Case outlines X Y Terminal number Terminal symbol Terminal number Terminal symbol 1 GROUND COMPENSATION 25 D7(MSB) GROUND 2 ENCODE +VINT26 D6-VS3 +VS+VREF27 D5GROUND

47、 4 GROUND GROUND 28 D4D0(LSB) 5 -VREF+VS29 D3 16 -VSAIN30 D2D27 NC -VS31 D1 38 AIN-VREF32 D0(LSB) D49 +VS+VS33 GROUND D510 GROUND ENCODE 34 -VSD611 +VREFD7(MSB) 35 GROUND D7(MSB) 12 COMP D636 +VSENCODE 13 +VINTD537 +VS+VS14 +VREF 438 GROUND -VREF15 GROUND D339 -VS-VS16 +VSD240 GROUND AIN17 AIN 141 D

48、0(LSB) +VS18 NC D0(LSB) 42 D1GROUND 19 -VSGROUND 43 D2+VREF20 -VREF-VS44 D3NC 21 GROUND GROUND 45 D4- 22 +VS+VS46 D5- 23 ENCODE NC 47 D6- 24 GROUND +VS48 D7(MSB) - NC = No connection FIGURE 1. Terminal connections. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-94703 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43216-5000 REVISION LEVEL B SHEET 9 DSCC FORM 2234 APR 97 4. QUALITY ASSURANCE PROVISIONS 4.1 Sampling and inspection. For device classes