1、 REVISIONS LTR DESCRIPTION DATE (YR-MO-DA) APPROVED A Replace reference to MIL-STD-973 with reference to MIL-PRF-38535. - ro 08-10-23 R. HEBER REV SHET REV SHET REV STATUS REV A A A A A A A A A A A A A OF SHEETS SHEET 1 2 3 4 5 6 7 8 9 10 11 12 13 PMIC N/A PREPARED BY RAJESH PITHADIA CHECKED BY RAJE
2、SH PITHADIA DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43218-3990 http:/www.dscc.dla.mil APPROVED BY MICHAEL A. FRYE STANDARD MICROCIRCUIT DRAWING THIS DRAWING IS AVAILABLE FOR USE BY ALL DEPARTMENTS AND AGENCIES OF THE DEPARTMENT OF DEFENSE DRAWING APPROVAL DATE 96-01-19 MICROCIRCUIT, LINEAR, DU
3、AL, PRECISION OPERATIONAL AMPLIFIER, MONOLITHIC SILICON AMSC N/A REVISION LEVEL A SIZE A CAGE CODE 67268 5962-95665 SHEET 1 OF 13 DSCC FORM 2233 APR 97 5962-E481-08 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A
4、5962-95665 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43218-3990 REVISION LEVEL A SHEET 2 DSCC FORM 2234 APR 97 1. SCOPE 1.1 Scope. This drawing documents two product assurance class levels consisting of high reliability (device classes Q and M) and space application (device class V). A choice of
5、 case outlines and lead finishes are available and are reflected in the Part or Identifying Number (PIN). When available, a choice of Radiation Hardness Assurance (RHA) levels is reflected in the PIN. 1.2 PIN. The PIN is as shown in the following example: 5962 - 95665 01 M P A Federal stock class de
6、signator RHA designator (see 1.2.1) Device type (see 1.2.2)Device class designatorCase outline (see 1.2.4) Lead finish (see 1.2.5) / (see 1.2.3) / Drawing number 1.2.1 RHA designator. Device classes Q and V RHA marked devices meet the MIL-PRF-38535 specified RHA levels and are marked with the approp
7、riate RHA designator. Device class M RHA marked devices meet the MIL-PRF-38535, appendix A specified RHA levels and are marked with the appropriate RHA designator. A dash (-) indicates a non-RHA device. 1.2.2 Device type(s). The device type(s) identify the circuit function as follows: Device type Ge
8、neric number Circuit function 01 1213 Dual, precision, operational amplifier 1.2.3 Device class designator. The device class designator is a single letter identifying the product assurance level as follows: Device class Device requirements documentation M Vendor self-certification to the requirement
9、s for MIL-STD-883 compliant, non-JAN class level B microcircuits in accordance with MIL-PRF-38535, appendix A Q or V Certification and qualification to MIL-PRF-38535 1.2.4 Case outline(s). The case outline(s) are as designated in MIL-STD-1835 and as follows: Outline letter Descriptive designator Ter
10、minals Package style P GDIP1-T8 or CDIP2-T8 8 Dual-in-line 1.2.5 Lead finish. The lead finish is as specified in MIL-PRF-38535 for device classes Q and V or MIL-PRF-38535, appendix A for device class M. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,
11、-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-95665 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43218-3990 REVISION LEVEL A SHEET 3 DSCC FORM 2234 APR 97 1.3 Absolute maximum ratings. 1/ Total supply voltage (+VSto -VS) . 36 V Input current . 15 mA Output short circuit duration Continuous Storage tem
12、perature range (TSTG) . -65C to +150C Lead temperature (soldering, 10 seconds) . +300C Junction temperature (TJ) . +175C Maximum power dissipation (PD) 500 mW Thermal resistance, junction-to-case (JC) . See MIL-STD-1835 Thermal resistance, junction-to-ambient (JA) 100C/W 1.4 Recommended operating co
13、nditions. Supply voltages (+VS, -VS) 3.3 V, 5 V, 15 V Ambient operating temperature range (TA) -55C to +125C 2. APPLICABLE DOCUMENTS 2.1 Government specification, standards, and handbooks. The following specification, standards, and handbooks form a part of this drawing to the extent specified herei
14、n. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract. DEPARTMENT OF DEFENSE SPECIFICATION MIL-PRF-38535 - Integrated Circuits, Manufacturing, General Specification for. DEPARTMENT OF DEFENSE STANDARDS MIL-STD-883 - Test Method Standard Microcir
15、cuits. MIL-STD-1835 - Interface Standard Electronic Component Case Outlines. DEPARTMENT OF DEFENSE HANDBOOKS MIL-HDBK-103 - List of Standard Microcircuit Drawings. MIL-HDBK-780 - Standard Microcircuit Drawings. (Copies of these documents are available online at http:/assist.daps.dla.mil/quicksearch/
16、 or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.) 2.2 Order of precedence. In the event of a conflict between the text of this drawing and the references cited herein, the text of this drawing takes precedence. Nothing in this document,
17、however, supersedes applicable laws and regulations unless a specific exemption has been obtained. _ 1/ Stresses above the absolute maximum rating may cause permanent damage to the device. Extended operation at the maximum levels may degrade performance and affect reliability. Provided by IHSNot for
18、 ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-95665 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43218-3990 REVISION LEVEL A SHEET 4 DSCC FORM 2234 APR 97 3. REQUIREMENTS 3.1 Item requirements. The individual item requirements
19、for device classes Q and V shall be in accordance with MIL-PRF-38535 and as specified herein or as modified in the device manufacturers Quality Management (QM) plan. The modification in the QM plan shall not affect the form, fit, or function as described herein. The individual item requirements for
20、device class M shall be in accordance with MIL-PRF-38535, appendix A for non-JAN class level B devices and as specified herein. 3.2 Design, construction, and physical dimensions. The design, construction, and physical dimensions shall be as specified in MIL-PRF-38535 and herein for device classes Q
21、and V or MIL-PRF-38535, appendix A and herein for device class M. 3.2.1 Case outline. The case outline shall be in accordance with 1.2.4 herein. 3.2.2 Terminal connections. The terminal connections shall be as specified on figure 1. 3.3 Electrical performance characteristics and postirradiation para
22、meter limits. Unless otherwise specified herein, the electrical performance characteristics and postirradiation parameter limits are as specified in table I and shall apply over the full ambient operating temperature range. 3.4 Electrical test requirements. The electrical test requirements shall be
23、the subgroups specified in table II. The electrical tests for each subgroup are defined in table I. 3.5 Marking. The part shall be marked with the PIN listed in 1.2 herein. In addition, the manufacturers PIN may also be marked. For packages where marking of the entire SMD PIN number is not feasible
24、due to space limitations, the manufacturer has the option of not marking the “5962-“ on the device. For RHA product using this option, the RHA designator shall still be marked. Marking for device classes Q and V shall be in accordance with MIL-PRF-38535. Marking for device class M shall be in accord
25、ance with MIL-PRF-38535, appendix A. 3.5.1 Certification/compliance mark. The certification mark for device classes Q and V shall be a “QML“ or “Q“ as required in MIL-PRF-38535. The compliance mark for device class M shall be a “C“ as required in MIL-PRF-38535, appendix A. 3.6 Certificate of complia
26、nce. For device classes Q and V, a certificate of compliance shall be required from a QML-38535 listed manufacturer in order to supply to the requirements of this drawing (see 6.6.1 herein). For device class M, a certificate of compliance shall be required from a manufacturer in order to be listed a
27、s an approved source of supply in MIL-HDBK-103 (see 6.6.2 herein). The certificate of compliance submitted to DSCC-VA prior to listing as an approved source of supply for this drawing shall affirm that the manufacturers product meets, for device classes Q and V, the requirements of MIL-PRF-38535 and
28、 herein or for device class M, the requirements of MIL-PRF-38535, appendix A and herein. 3.7 Certificate of conformance. A certificate of conformance as required for device classes Q and V in MIL-PRF-38535 or for device class M in MIL-PRF-38535, appendix A shall be provided with each lot of microcir
29、cuits delivered to this drawing. 3.8 Notification of change for device class M. For device class M, notification to DSCC-VA of change of product (see 6.2 herein) involving devices acquired to this drawing is required for any change that affects this drawing. 3.9 Verification and review for device cl
30、ass M. For device class M, DSCC, DSCCs agent, and the acquiring activity retain the option to review the manufacturers facility and applicable required documentation. Offshore documentation shall be made available onshore at the option of the reviewer. 3.10 Microcircuit group assignment for device c
31、lass M. Device class M devices covered by this drawing shall be in microcircuit group number 52 (see MIL-PRF-38535, appendix A). Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-95665 DEFENSE SUPPLY CENTER COL
32、UMBUS COLUMBUS, OHIO 43218-3990 REVISION LEVEL A SHEET 5 DSCC FORM 2234 APR 97 TABLE I. Electrical performance characteristics. Test Symbol Conditions -55C TA +125C unless otherwise specified Group A subgroups Device type Limits Unit Min Max VS= 5 V 1/ Input offset voltage VOS1 01 275 V 2,3 500 Inpu
33、t offset voltage drift 2/ VOS/ T 2,3 01 3.0 V/C Input offset current IOS1 01 40 nA 2,3 100 Input bias current IB1 01 200 nA 2,3 275 Input resistance 2/ RINDifferential mode 4 01 10 M Input voltage range VIR1 01 3.5 to 0 V 2,3 3.1 to 0.4 CMRR VCM= 0 V to 3.5 V 1 01 86 dB Common mode rejection ratio V
34、CM= 0.4 V to 3.1 V 2,3 83 PSRR VS= 2.5 V to 12.5 V 1 01 90 dB Power supply rejection ratio 2,3 87 Large signal voltage gain AVOLVO= 0.05 V to 3.7 V, 4 01 250 V/mV RL= 500 5,6 150 See footnotes at end of table. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from
35、IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-95665 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43218-3990 REVISION LEVEL A SHEET 6 DSCC FORM 2234 APR 97 TABLE I. Electrical performance characteristics - Continued. Test Symbol Conditions -55C TA +125C unless otherwise specified Group A subgrou
36、ps Device type Limits Unit Min Max VS= 5 V - Continued 1/ Maximum output voltage 3/ VOSOutput high, no load 1 01 4.30 V gain Output high, ISOURCE= 1 mA 4.20 Output high, ISOURCE= 20 mA 3.80 Output low, no load 0.007 Output low, ISINK= 1 mA 0.050 Output low, ISINK= 20 mA 0.620 Output high, no load 2,
37、3 4.05 Output high, ISOURCE= 1 mA 3.90 Output high, ISOURCE= 15 mA 3.60 Output low, no load 0.012 Output low, ISINK= 1 mA 0.070 Output low, ISINK= 15 mA 0.750 Maximum output current 4/ IO1 01 30 mA IS01 2.0 3.8 mA Supply current per amplifier 2,3 1.3 4.2 Minimum supply voltage VSSingle supply, VCM=
38、0 V 1 01 2.5 V See footnotes at end of table. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-95665 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43218-3990 REVISION LEVEL A SHEET 7 DSCC FORM 2234 APR 97 TABL
39、E I. Electrical performance characteristics - Continued. Test Symbol Conditions -55C TA +125C unless otherwise specified Group A subgroups Device type Limits Unit Min Max VS= 15 V 5/ Input offset voltage VOS1 01 550 V 2,3 800 Input offset voltage drift 2/ VOS/ T 2,3 01 3 V/C Input offset current IOS
40、1 01 40 nA 2,3 90 Input bias current IB1 01 190 nA 2,3 250 Input voltage range VIR1 01 13.5 to -15.0 V 2,3 13.1 to -14.6 CMRR VCM= -15 V to 13.5 V 1 01 86 dB Common mode rejection mode VCM= -14.6 V to 13.1 2,3 83 PSRR VS= 2 V to 18 V 1 01 90 dB Power supply rejection ratio VS= 2 V to 15 V 2,3 87 Lar
41、ge signal voltage gain AVOLVO= 0 V to 10 V, 4 01 1200 V/mV RL= 2 k 5,6 800 See footnotes at end table. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-95665 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43218
42、-3990 REVISION LEVEL A SHEET 8 DSCC FORM 2234 APR 97 TABLE I. Electrical performance characteristics - Continued. Test Symbol Conditions -55C TA +125C unless otherwise specified Group A subgroups Device type Limits Unit Min Max VS= 15 V - Continued 5/ Maximum output voltage swing VOSOutput high, ISO
43、URCE= 20 mA 1 01 13.7 V Output low, ISINK= 20 mA -14.3 Output high, ISOURCE= 15 mA 2,3 13.6 Output low, ISINK= 15 mA -14.2 Maximum output 4/ current IO1 01 30 mA Slew rate 6/ SR AV= -2 V 4 01 10 V/s Gain bandwidth product GBW f = 100 kHz 4 01 15 MHz IS1 01 2.0 4.7 mA Supply current per amplifier 2,3
44、 1.3 5.4 Channel separation - VO= 10 V, RL= 2 k 4 01 128 dB Minimum supply voltage VSEqual split supplies 1 01 2.0 V VS= 3.3 V 1/ 7/ Input offset voltage VOS1 01 275 V 2,3 500 Input voltage range 8/ VIR1 01 1.8 to 0 V 2,3 1.4 to 0.4 See footnotes at end of table. Provided by IHSNot for ResaleNo repr
45、oduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-95665 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43218-3990 REVISION LEVEL A SHEET 9 DSCC FORM 2234 APR 97 TABLE I. Electrical performance characteristics - Continued. Test Symbol Conditions -5
46、5C TA +125C unless otherwise specified Group A subgroups Device type Limits Unit Min Max VS= 3.3 V - Continued 1/ 7/ Maximum output voltage swing VOSOutput high, no load 1 01 2.60 V Output high, ISOURCE= 1 mA 2.50 Output high, ISOURCE= 20 mA 2.10 Output low, no load 0.007 Output low, ISINK= 1 mA 0.0
47、50 Output low, ISINK= 20 mA 0.620 Output high, no load 2,3 2.35 Output high, ISOURCE= 1 mA 2.20 Output high, ISOURCE= 15 mA 1.90 Output low, no load 0.012 Output low, ISINK= 1 mA 0.070 Output low, ISINK= 15 mA 0.750 Maximum output current IO1 01 30 mA 1/ VCM= 0.5 V, VOUT= 0.5 V, unless otherwise spe
48、cified. 2/ If not tested, shall be guaranteed to the limits specified in table I herein. 3/ Guaranteed by correlation to 3.3 V and 15 V tests. 4/ Guaranteed by correlation to 3.3 V tests. 5/ VCM= 0 V, VOUT= 0 V, unless otherwise specified. 6/ Slew rate is measured between 8.5 V on an output swing of 10 V on 15 V supplies. 7/ Most electrical characteristics change very little with supply voltage. See the 5 V section in table I herein for characteristics
copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
备案/许可证编号:苏ICP备17064731号-1