DLA SMD-5962-96539 REV D-2013 MICROCIRCUIT DIGITAL ADVANCED CMOS RADIATION HARDENED QUADRUPLE 2-INPUT EXCLUSIVE OR GATE TTL COMPATIBLE INPUTS MONOLITHIC SILICON.pdf

1、 REVISIONS LTR DESCRIPTION DATE (YR-MO-DA) APPROVED A Changes in accordance with NOR 5962-R119-97. 96-12-10 Monica L. Poelking B Incorporate Revision A. Update boilerplate to MIL-PRF-38535 requirements. LTG 01-09-04 Thomas M. Hess C Correct the title to accurately describe the device function. . Cha

2、nge figure 4, switching waveforms and test circuit. Update boilerplate to the latest MIL-PRF-38535 requirements. - jak 07-08-23 Thomas M. Hess D Update boilerplate paragraphs and radiation paragraphs 4.4.4.1 4.4.4.4 to the current MIL-PRF-38535 requirements. Delete class M requirement throughout.- L

3、TG 13-12-17 Thomas M. Hess REV SHEET REV SHEET REV STATUS REV D D D D D D D D D D D D D D OF SHEETS SHEET 1 2 3 4 5 6 7 8 9 10 11 12 13 14 PMIC N/A PREPARED BY Thanh V. Nguyen DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 http:/www.landandmaritime.dla.mil STANDARD MICROCIRCUIT DRAWING THIS DRAWING

4、 IS AVAILABLE FOR USE BY ALL DEPARTMENTS AND AGENCIES OF THE DEPARTMENT OF DEFENSE AMSC N/A CHECKED BY Thanh V. Nguyen APPROVED BY Monica L. Poelking MICROCIRCUIT, DIGITAL, ADVANCED CMOS, RADIATION HARDENED, QUADRUPLE 2-INPUT EXCLUSIVE OR GATE, TTL COMPATIBLE INPUTS, MONOLITHIC SILICON DRAWING APPRO

5、VAL DATE 96-04-05 REVISION LEVEL D SIZE A CAGE CODE 67268 5962-96539 SHEET 1 OF 14 DSCC FORM 2233 APR 97 5962-E083-14 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-96539 DLA LAND AND MARITIME COLUMBUS, OHIO

6、 43218-3990 REVISION LEVEL D SHEET 2 DSCC FORM 2234 APR 97 1. SCOPE 1.1 Scope. This drawing documents two product assurance class levels consisting of high reliability (device class Q) and space application (device class V). A choice of case outlines and lead finishes are available and are reflected

7、 in the Part or Identifying Number (PIN). When available, a choice of Radiation Hardness Assurance (RHA) levels is reflected in the PIN. 1.2 PIN. The PIN is as shown in the following example: 5962 H 96539 01 V X C Federal stock class designator RHA designator (see 1.2.1) Device type (see 1.2.2) Devi

8、ce class designator Case outline (see 1.2.4) Lead finish (see 1.2.5) / (see 1.2.3) / Drawing number 1.2.1 RHA designator. Device classes Q and V RHA marked devices meet the MIL-PRF-38535 specified RHA levels and are marked with the appropriate RHA designator. A dash (-) indicates a non-RHA device. 1

9、.2.2 Device type(s). The device type(s) identify the circuit function as follows: Device type Generic number Circuit function 01 54ACTS86 Radiation hardened, quadruple 2-input exclusive OR gate, TTL compatible inputs 1.2.3 Device class designator. The device class designator is a single letter ident

10、ifying the product assurance level as follows: Device class Device requirements documentation Q or V Certification and qualification to MIL-PRF-38535 1.2.4 Case outline(s). The case outline(s) are as designated in MIL-STD-1835 and as follows: Outline letter Descriptive designator Terminals Package s

11、tyle C GDIP1-T14 or CDIP2-T14 14 Dual-in-line X CDFP3-F14 14 Dual flat pack 1.2.5 Lead finish. The lead finish is as specified in MIL-PRF-38535 for device classes Q and V. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING

12、SIZE A 5962-96539 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL D SHEET 3 DSCC FORM 2234 APR 97 1.3 Absolute maximum ratings. 1/ 2/ 3/ Supply voltage range (VDD) -0.3 V dc to +7.0 V dc DC input voltage range (VIN) -0.3 V dc to VDD+ 0.3 V dc DC output voltage range (VOUT) . -0.3 V dc

13、 to VDD+ 0.3 V dc DC input current, any one input (IIN). 10 mA Latch-up immunity current (ILU) 150 mA Storage temperature range (TSTG) . -65C to +150C Lead temperature (soldering, 5 seconds) +300C Thermal resistance, junction-to-case (JC) . See MIL-STD-1835 Junction temperature (TJ) +175C Maximum pa

14、ckage power dissipation (PD) . 1.0 W 1.4 Recommended operating conditions. 2/ 3/ Supply voltage range (VDD) +4.5 V dc to +5.5 V dc Input voltage range (VIN) +0.0 V dc to VDDOutput voltage range (VOUT). +0.0 V dc to VDDCase operating temperature range (TC) . -55C to +125C Maximum input rise or fall t

15、ime at VDD= 4.5 V (tr, tf) 1 ns/V 4/ 1.5 Radiation features. 5/ Maximum total dose available (dose rate = 50 300 rads (Si)/s) 1 x 106Rads (Si) Single event phenomenon (SEP): Effective linear energy transfer (LET), no upsets (see 4.4.4.4) 80 MeV/(mg/cm2) 6/ Effective linear energy transfer (LET), no

16、latch-up (see 4.4.4.4) 120 MeV/(mg/cm2) 6/ Dose rate upset (20 ns pulse) 1 x 109Rads (Si)/s Latch-up . None Dose rate survivability . 1 x 1012Rads (Si)/s _ 1/ Stresses above the absolute maximum rating may cause permanent damage to the device. Extended operation at the maximum levels may degrade per

17、formance and affect reliability. 2/ Unless otherwise noted, all voltages are referenced to VSS. 3/ The limits for the parameters specified herein shall apply over the full specified VDDrange and case temperature range of -55C to +125C unless otherwise noted. 4/ Derate system propagation delays by di

18、fference in rise time to switch point for tror tf 1 ns/V. 5/ Radiation testing is performed on the standard evaluation circuit. 6/ Limits obtained during technology characterization/qualification, guaranteed by design or process, but not production tested unless specified by the customer through the

19、 purchase order or contract. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-96539 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL D SHEET 4 DSCC FORM 2234 APR 97 2. APPLICABLE DOCUMENTS 2.1 Go

20、vernment specification, standards, and handbooks. The following specification, standards, and handbooks form a part of this drawing to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract. DEPARTMENT OF DEFENSE SPECIFI

21、CATION MIL-PRF-38535 - Integrated Circuits, Manufacturing, General Specification for. DEPARTMENT OF DEFENSE STANDARDS MIL-STD-883 - Test Method Standard Microcircuits. MIL-STD-1835 - Interface Standard Electronic Component Case Outlines. DEPARTMENT OF DEFENSE HANDBOOKS MIL-HDBK-103 - List of Standar

22、d Microcircuit Drawings. MIL-HDBK-780 - Standard Microcircuit Drawings. (Copies of these documents are available online at http:/quicksearch.dla.mil or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094). 2.2 Non-Government publications. The fo

23、llowing document(s) form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents cited in the solicitation or contract. ASTM INTERNATIONAL (ASTM) ASTM F1192 - Standard Guide for the Measurement of Single Event Phenomena (SEP) Induced by Heavy

24、 Ion Irradiation of Semiconductor Devices. (Copies of this document is available online at http:/www.astm.org/ or from ASTM International, 100 Barr Harbor Drive, P. O. Box C700, West Conshohocken, PA 19428-2959). 2.3 Order of precedence. In the event of a conflict between the text of this drawing an

25、d the references cited herein, the text of this drawing takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained. 3. REQUIREMENTS 3.1 Item requirements. The individual item requirements for device classes Q and V sh

26、all be in accordance with MIL-PRF-38535 as specified herein, or as modified in the device manufacturers Quality Management (QM) plan. The modification in the QM plan shall not affect the form, fit, or function as described herein. 3.2 Design, construction, and physical dimensions. The design, constr

27、uction, and physical dimensions shall be as specified in MIL-PRF-38535 and herein for device classes Q and V. 3.2.1 Case outlines. The case outlines shall be in accordance with 1.2.4 herein. 3.2.2 Terminal connections. The terminal connections shall be as specified on figure 1. 3.2.3 Truth table. Th

28、e truth table shall be as specified on figure 2. 3.2.4 Logic diagram. The logic diagram shall be as specified on figure 3. 3.2.5 Switching waveforms and test circuit. The switching waveforms and test circuit shall be as specified on figure 4. 3.2.6 Radiation exposure circuit. The radiation exposure

29、circuit shall be maintained by the manufacturer under document revision level control and shall be made available to the preparing and acquiring activity upon request. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE

30、 A 5962-96539 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL D SHEET 5 DSCC FORM 2234 APR 97 3.3 Electrical performance characteristics and postirradiation parameter limits. Unless otherwise specified herein, the electrical performance characteristics and postirradiation parameter li

31、mits are as specified in table IA and shall apply over the full case operating temperature range. 3.4 Electrical test requirements. The electrical test requirements shall be the subgroups specified in table IIA. The electrical tests for each subgroup are defined in table IA. 3.5 Marking. The part sh

32、all be marked with the PIN listed in 1.2 herein. In addition, the manufacturers PIN may also be marked. For packages where marking of the entire SMD PIN number is not feasible due to space limitations, the manufacturer has the option of not marking the “5962-“ on the device. For RHA product using th

33、is option, the RHA designator shall still be marked. Marking for device classes Q and V shall be in accordance with MIL-PRF-38535. 3.5.1 Certification/compliance mark. The certification mark for device classes Q and V shall be a “QML“ or “Q“ as required in MIL-PRF-38535. 3.6 Certificate of complianc

34、e. For device classes Q and V, a certificate of compliance shall be required from a QML-38535 listed manufacturer in order to supply to the requirements of this drawing (see 6.6.1 herein). The certificate of compliance submitted to DLA Land and Maritime-VA prior to listing as an approved source of s

35、upply for this drawing shall affirm that the manufacturers product meets, for device classes Q and V, the requirements of MIL-PRF-38535 and herein. 3.7 Certificate of conformance. A certificate of conformance as required for device classes Q and V in MIL-PRF-38535 shall be provided with each lot of

36、microcircuits delivered to this drawing. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-96539 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL D SHEET 6 DSCC FORM 2234 APR 97 TABLE IA. Electric

37、al performance characteristics. Test Symbol Test conditions 1/ -55C TC +125C unless otherwise specified Device type VDDGroup A subgroups Limits 2/ Unit Min Max High level input voltage VIHAll 4.5 V 1, 2, 3 2.25 V M, D, P, L, R, F, G, H 3/ All 1 2.25 All 5.5 V 1, 2, 3 2.75 M, D, P, L, R, F, G, H 3/ A

38、ll 1 2.75 Low level input voltage VILAll 4.5 V 1, 2, 3 0.8 V M, D, P, L, R, F, G, H 3/ All 1 0.8 All 5.5 V 1, 2, 3 0.8 M, D, P, L, R, F, G, H 3/ All 1 0.8 High level output voltage VOHFor all inputs affecting output under test, VIN= VDDor VSSIOH= -8.0 mA All 4.5 V 1, 2, 3 3.15 V M, D, P, L, R, F, G,

39、 H 3/ All 1 3.15 Low level output voltage VOLFor all inputs affecting output under test, VIN= VDDor VSSIOL= 8.0 mA All 4.5 V 1, 2, 3 0.4 V M, D, P, L, R, F, G, H 3/ All 1 0.4 Input current high IIHFor input under test, VIN= 5.5 V For all other inputs VIN= VDDor VSSAll 5.5 V 1, 2, 3 +1.0 A M, D, P, L

40、, R, F, G, H 3/ All 1 +1.0 Input current low IILFor input under test, VIN= VSSFor all other inputs VIN= VDDor VSSAll 5.5 V 1, 2, 3 -1.0 A M, D, P, L, R, F, G, H 3/ All 1 -1.0 Quiescent supply current delta, TTL input levels IDD4/ For input under test VIN= VDD2.1 V For all other inputs VIN= VDDor VSS

41、All 5.5 V 1, 2, 3 1.6 mA M, D, P, L, R, F, G, H 3/ All 1 1.6 Quiescent supply current IDDQVIN= VDDor VSSAll 5.5 V 1, 2, 3 10.0 A M, D, P, L, R, F, G, H 3/ All 1 10.0 Output current (Sink) IOL5/ VIN= VDDor VSS, VOL= 0.4 V All 4.5 V and 5.5 V 1, 2, 3 8.0 mA Output current (Source) IOH5/ VIN= VDDor VSS

42、, VOH= VDD -0.4 V All 4.5 V and 5.5 V 1, 2, 3 -8.0 mA Short circuit output current IOS6/ 7/ VOUT= VDDand VSSAll 5.5 V 1, 2, 3 -200 200 mA See footnotes at end of table. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZ

43、E A 5962-96539 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL D SHEET 7 DSCC FORM 2234 APR 97 TABLE IA. Electrical performance characteristics Continued. Test Symbol Test conditions 1/ -55C TC +125C unless otherwise specified Device type VDDGroup A subgroups Limits 2/ Unit Min Max In

44、put capacitance CINf = 1 MHz, see 4.4.1c All 0.0 V 4 15.0 pF Output capacitance COUTf = 1 MHz, see 4.4.1c All 0.0 V 4 15.0 pF Switching power dissipation PSW8/ CL= 50 pF, per switching output All 4.5 V and 5.5 V 4, 5, 6 1.8 mW/MHz Functional test 9/ VIH= 0.5 VDD, VIL= 0.8 V See 4.4.1b All 4.5 V and

45、5.5 V 7, 8 L H M, D, P, L, R, F, G, H 3/ All 7 L H Propagation delay time, An or Bn to Yn tPLH10/ CL= 50 pF, see figure 4 All 4.5 V and 4.5 V 9, 10, 11 1.0 13.0 ns M, D, P, L, R, F, G, H 3/ All 9 1.0 13.0 tPHL10/ CL= 50 pF, see figure 4 All 4.5 V and 5.5 V 9, 10, 11 1.0 14.0 M, D, P, L, R, F, G, H 3

46、/ All 9 1.0 14.0 1/ Each input/output, as applicable, shall be tested at the specified temperature, for the specified limits, to the tests in table IA herein. Output terminals not designated shall be high level logic, low level logic, or open, except for the IDDQand IDDtests, the output terminals sh

47、all be open. When performing the IDDQand IDDtests, the current meter shall be placed in the circuit such that all current flows through the meter. 2/ For negative and positive voltage and current values, the sign designates the potential difference in reference to VSSand the direction of current flo

48、w respectively; and the absolute value of the magnitude, not the sign, is relative to the minimum and maximum limits, as applicable, listed herein. 3/ RHA parts supplied to this drawing have been characterized through all levels M, D, P, L, R, F, G, and H of irradiation. However, this device is only tested at the H level. Pre and Post irradiation values are identical unless otherwise specified in table IA. When performing post irradiation electrical measurements for any RHA level, TA= +25C. 4/ This test may be performed either one input at a time (preferred method) or