DLA SMD-5962-96625 REV C-2003 MICROCIRCUIT DIGITAL RADIATION HARDENED CMOS COUNTER DIVIDER MONOLITHIC SILICON《抗辐射互补金属氧化物半导体计数器或分配器硅单片电路数字微电路》.pdf

1、 REVISIONS LTR DESCRIPTION DATE (YR-MO-DA) APPROVED A Changes in accordance with NOR 5962-R178-97. 97-02-24 Monica L. Poelking B Changes in accordance with NOR 5962-R399-97. 97-07-29 Raymond Monnin C Incorporate revisions A and B. Update boilerplate to MIL-PRF-38535 requirements. Editorial changes t

2、hroughout. LTG 03-11-19 Thomas M. Hess REV SHET REV C C C C C C C C C C SHEET 15 16 17 18 19 20 21 22 23 24 REV STATUS REV C C C C C C C C C C C C C C OF SHEETS SHEET 1 2 3 4 5 6 7 8 9 10 11 12 13 14 PMIC N/A PREPARED BY Rick C. Officer STANDARD MICROCIRCUIT DRAWING CHECKED BY Monica L. Poelking DEF

3、ENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43216 http:/www.dscc.dla.mil THIS DRAWING IS AVAILABLE FOR USE BY ALL DEPARTMENTS APPROVED BY Monica L. Poelking AND AGENCIES OF THE DEPARTMENT OF DEFENSE DRAWING APPROVAL DATE 95-12-15 MICROCIRCUIT, DIGITAL, RADIATION HARDENED CMOS, COUNTER/DIVIDER, MONOLI

4、THIC SILICON AMSC N/A REVISION LEVEL C SIZE A CAGE CODE 67268 5962-96625 SHEET 1 OF 24 DSCC FORM 2233 APR 97 5962-E052-04 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,

5、-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-96625 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43216-5000 REVISION LEVEL C SHEET 2 DSCC FORM 2234 APR 97 1. SCOPE 1.1 Scope. This drawing documents two product assurance class levels consisting of high reliability (device classes Q and M) and space app

6、lication (device class V). A choice of case outlines and lead finishes are available and are reflected in the Part or Identifying Number (PIN). When available, a choice of Radiation Hardness Assurance (RHA) levels are reflected in the PIN. 1.2 PIN. The PIN is as shown in the following example: 5962

7、R 96625 01 V X C Federal stock class designator RHA designator (see 1.2.1) Devicetype (see 1.2.2) Device class designator Caseoutline (see 1.2.4) Lead finish (see 1.2.5) / (see 1.2.3) / Drawing number 1.2.1 RHA designator. Device classes Q and V RHA marked devices meet the MIL-PRF-38535 specified RH

8、A levels and are marked with the appropriate RHA designator. Device class M RHA marked devices meet the MIL-PRF-38535, appendix A specified RHA levels and are marked with the appropriate RHA designator. A dash (-) indicates a non-RHA device. 1.2.2 Device type(s). The device type(s) identify the circ

9、uit function as follows: Device type Generic number Circuit function 01 4017B Radiation hardened CMOS, decade counter with 10 decoded outputs 02 4022B Radiation hardened CMOS, octal counter with 8 decoded outputs 03 4017BN Radiation hardened CMOS, decade counter with 10 decoded outputs, neutron irra

10、diated die 04 4022BN Radiation hardened CMOS, octal counter with 8 decoded outputs, neutron irradiated die 1.2.3 Device class designator. The device class designator is a single letter identifying the product assurance level as follows: Device class Device requirements documentation M Vendor self-ce

11、rtification to the requirements for MIL-STD-883 compliant, non-JAN class level B microcircuits in accordance with MIL-PRF-38535, appendix A Q or V Certification and qualification to MIL-PRF-38535 1.2.4 Case outline(s). The case outline(s) are as designated in MIL-STD-1835 and as follows: Outline let

12、ter Descriptive designator Terminals Package style E CDIP2-T16 16 Dual-in-line package X CDFP4-F16 16 Flat package 1.2.5 Lead finish. The lead finish is as specified in MIL-PRF-38535 for device classes Q and V or MIL-PRF-38535, appendix A for device class M. Provided by IHSNot for ResaleNo reproduct

13、ion or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-96625 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43216-5000 REVISION LEVEL C SHEET 3 DSCC FORM 2234 APR 97 1.3 Absolute maximum ratings. 1/ 2/ 3/ Supply voltage range (VDD) -0.5 V dc to +20 V dc Inp

14、ut voltage range . -0.5 V dc to VDD+ 0.5 V dc DC input current, any one input . 10 mA Device dissipation per output transistor . 100 mW Storage temperature range (TSTG) -65C to +150C Lead temperature (soldering, 10 seconds) +265C Thermal resistance, junction-to-case (JC): Case E 24C/W Case X 29C/W T

15、hermal resistance, junction-to-ambient (JA): Case E 73C/W Case X 114C/W Junction temperature (TJ). +175C Maximum power dissipation at TA= +125C (PD): 4/ Case E 0.68 W Case X 0.44 W 1.4 Recommended operating conditions. Supply voltage range (VDD) 3.0 V dc to +18 V dc Case operating temperature range

16、(TC). -55C to +125C Input voltage (VIN) 0 V to VDDOutput voltage (VOUT). 0 V to VDDRadiation features: Total dose . 1 x 105Rads (Si) Single event phenomenon (SEP) effective linear energy threshold, no upsets or latchup (see 4.4.4.5) 75 MeV/(cm2/mg) 5/ Dose rate upset (20 ns pulse) . 5 x 108 Rads(Si)

17、/s 5/ Dose rate latch-up 2 x 108Rads(Si)/s 5/ Dose rate survivability 5 x 1011Rads(Si)/s 5/ Neutron irradiated 1 x 1014neutrons/cm26/ 2. APPLICABLE DOCUMENTS 2.1 Government specification, standards, and handbooks. The following specification, standards, and handbooks form a part of this drawing to t

18、he extent specified herein. Unless otherwise specified, the issues of these documents are those listed in the issue of the Department of Defense Index of Specifications and Standards (DoDISS) and supplement thereto, cited in the solicitation. SPECIFICATION DEPARTMENT OF DEFENSE MIL-PRF-38535 - Integ

19、rated Circuits, Manufacturing, General Specification for. 1/ Stresses above the absolute maximum rating may cause permanent damage to the device. Extended operation at the maximum levels may degrade performance and affect reliability. 2/ Unless otherwise specified, all voltages are referenced to VSS

20、. 3/ The limits for the parameters specified herein shall apply over the full specified VDDrange and case temperature range of -55C to +125C unless otherwise noted. 4/ If device power exceeds package dissipation capability, provide heat sinking or derate linearly (the derating is based on JA) at the

21、 following rate: Case E. 13.7 mW/C Case X. 8.8 mW/C 5/ Guaranteed by design or process but not tested. 6/ Device types 03 and 04 only. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-96625 DEFENSE SUPPLY CENT

22、ER COLUMBUS COLUMBUS, OHIO 43216-5000 REVISION LEVEL C SHEET 4 DSCC FORM 2234 APR 97 STANDARDS DEPARTMENT OF DEFENSE MIL-STD-883 - Test Method Standard Microcircuits. MIL-STD-1835 - Interface Standard Electronic Component Case Outlines. HANDBOOKS DEPARTMENT OF DEFENSE MIL-HDBK-103 - List of Standard

23、 Microcircuit Drawings. MIL-HDBK-780 - Standard Microcircuit Drawings. (Unless otherwise indicated, copies of the specification, standards, and handbooks are available from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.) 2.2 Order of precedence

24、. In the event of a conflict between the text of this drawing and the references cited herein, the text of this drawing takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained. 3. REQUIREMENTS 3.1 Item requirements

25、. The individual item requirements for device classes Q and V shall be in accordance with MIL-PRF-38535 and as specified herein or as modified in the device manufacturers Quality Management (QM) plan. The modification in the QM plan shall not affect the form, fit, or function as described herein. Th

26、e individual item requirements for device class M shall be in accordance with MIL-PRF-38535, appendix A for non-JAN class level B devices and as specified herein. 3.1.1 Microcircuit die. For the requirements for microcircuit die, see appendix A to this document. 3.2 Design, construction, and physica

27、l dimensions. The design, construction, and physical dimensions shall be as specified in MIL-PRF-38535 and herein for device classes Q and V or MIL-PRF-38535, appendix A and herein for device class M. 3.2.1 Case outlines. The case outlines shall be in accordance with 1.2.4 herein. 3.2.2 Terminal con

28、nections. The terminal connections shall be as specified on figure 1. 3.2.3 Radiation test connections. The radiation test connections shall be as specified in table III herein. 3.3 Electrical performance characteristics and postirradiation parameter limits. Unless otherwise specified herein, the el

29、ectrical performance characteristics and postirradiation parameter limits are as specified in table I and shall apply over the full case operating temperature range. 3.4 Electrical test requirements. The electrical test requirements shall be the subgroups specified in table IIA. The electrical tests

30、 for each subgroup are defined in table I. 3.5 Marking. The part shall be marked with the PIN listed in 1.2 herein. In addition, the manufacturers PIN may also be marked as listed in MIL-HDBK-103. For packages where marking of the entire SMD PIN number is not feasible due to space limitations, the m

31、anufacturer has the option of not marking the “5962-“ on the device. For RHA product using this option, the RHA designator shall still be marked. Marking for device classes Q and V shall be in accordance with MIL-PRF-38535. Marking for device class M shall be in accordance with MIL-PRF-38535, append

32、ix A. 3.5.1 Certification/compliance mark. The certification mark for device classes Q and V shall be a “QML“ or “Q“ as required in MIL-PRF-38535. The compliance mark for device class M shall be a “C“ as required in MIL-PRF-38535, appendix A. Provided by IHSNot for ResaleNo reproduction or networkin

33、g permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-96625 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43216-5000 REVISION LEVEL C SHEET 5 DSCC FORM 2234 APR 97 3.6 Certificate of compliance. For device classes Q and V, a certificate of compliance shall be required fr

34、om a QML-38535 listed manufacturer in order to supply to the requirements of this drawing (see 6.6.1 herein). For device class M, a certificate of compliance shall be required from a manufacturer in order to be listed as an approved source of supply in MIL-HDBK-103 (see 6.6.2 herein). The certificat

35、e of compliance submitted to DSCC-VA prior to listing as an approved source of supply for this drawing shall affirm that the manufacturers product meets, for device classes Q and V, the requirements of MIL-PRF-38535 and herein or for device class M, the requirements of MIL-PRF-38535, appendix A and

36、herein. 3.7 Certificate of conformance. A certificate of conformance as required for device classes Q and V in MIL-PRF-38535 or for device class M in MIL-PRF-38535, appendix A shall be provided with each lot of microcircuits delivered to this drawing. 3.8 Notification of change for device class M. F

37、or device class M, notification to DSCC-VA of change of product (see 6.2 herein) involving devices acquired to this drawing is required for any change as defined in MIL-PRF-38535, appendix A. 3.9 Verification and review for device class M. For device class M, DSCC, DSCCs agent, and the acquiring act

38、ivity retain the option to review the manufacturers facility and applicable required documentation. Offshore documentation shall be made available onshore at the option of the reviewer. 3.10 Microcircuit group assignment for device class M. Device class M devices covered by this drawing shall be in

39、microcircuit group number 40 (see MIL-PRF-38535, appendix A). Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-96625 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43216-5000 REVISION LEVEL C SHEET 6 DSCC FORM

40、2234 APR 97 TABLE I. Electrical performance characteristics. Limits Test Symbol Conditions -55C TC +125C unless otherwise specified Device type Group A subgroups Min Max Units 1, 3 1/ 5.0 VDD= 5 V VIN= 0.0 V or VDDAll 2 1/ 150 1, 3 1/ 10 VDD= 10 V VIN= 0.0 V or VDDAll 2 1/ 300 1, 3 1/ 10 VDD= 15 V V

41、IN= 0.0 V or VDDAll 2 1/ 600 1 10 VDD= 20 V, VIN= 0.0 V or VDDAll 2 1000 M, D, P, L, R 2/ All 1 25 Supply current IDDVDD= 18 V, VIN= 0.0 V or VDDAll 3 10 A 1 0.53 2 1/ 0.36 VDD= 5 V VO= 0.4 V VIN= 0.0 V or VDDAll 3 1/ 0.64 1 1.4 2 1/ 0.9 VDD= 10 V VO= 0.5 V VIN= 0.0 V or VDDAll 3 1/ 1.6 1 3.5 2 1/ 2

42、.4 Low level output current (sink) IOLVDD= 15 V VO= 1.5 V VIN= 0.0 V or VDDAll 3 1/ 4.2 mA See footnotes at end of table. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-96625 DEFENSE SUPPLY CENTER COLUMBUS C

43、OLUMBUS, OHIO 43216-5000 REVISION LEVEL C SHEET 7 DSCC FORM 2234 APR 97 TABLE I. Electrical performance characteristics Continued. Limits Test Symbol Conditions -55C TC +125C unless otherwise specified Device type Group A subgroups Min Max Units 1 -0.53 2 1/ -0.36 VDD= 5 V VO= 4.6 V VIN= 0.0 V or VD

44、DAll 3 1/ -0.64 1 -1.8 2 1/ -1.15 VDD= 5 V VO= 2.5 V VIN= 0.0 V or VDDAll 3 1/ -2.0 1 -1.4 2 1/ -0.9 VDD= 10 V VO= 9.5 V VIN= 0.0 V or VDDAll 3 1/ -1.6 1 -3.5 2 1/ -2.4 High level output current (source) IOHVDD= 15 V VO= 13.5 V VIN= 0.0 V or VDDAll 3 1/ -4.2 mA VDD= 5 V, no load 1/ 1, 2, 3 4.95 VDD=

45、 10 V, no load 1/ 1, 2, 3 9.95 Output voltage, high VOHVDD= 15 V, no load 3/ All 1, 2, 3 14.95 V VDD= 5 V, no load 1/ 1, 2, 3 0.05 VDD= 10 V, no load 1/ 1, 2, 3 0.05 Output voltage, low VOLVDD= 15 V, no load All 1, 2, 3 0.05 V VDD= 5 V VOH 4.5 V, VOL9.0 V, VOL13.5 V, VOL4.5 V, VOL9.0 V, VOL13.5 V, V

46、OLVDD/2 VOL VDD/2 V 9 200 VDD= 5.0 V, VIN= VDDor GND 10, 11 270 VDD= 10 V, VIN= VDDor GND 9 1/ 100 Transition time 4/ tTLH, tTHLVDD= 15 V, VIN= VDDor GND All 9 1/ 80 ns See footnotes at end of table. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-ST

47、ANDARD MICROCIRCUIT DRAWING SIZE A 5962-96625 DEFENSE SUPPLY CENTER COLUMBUS COLUMBUS, OHIO 43216-5000 REVISION LEVEL C SHEET 9 DSCC FORM 2234 APR 97 TABLE I. Electrical performance characteristics Continued. Limits Test Symbol Conditions -55C TC +125C unless otherwise specified Device type Group A

48、subgroups Min Max Units 9 650 VDD= 5.0 V, VIN= VDDor GND All 10, 11 878 M, D, P, L, R 2/ All 9 878 VDD= 10 V, VIN= VDDor GND 9 1/ 270 Propagation delay time, CLOCK to DECODE OUT 4/ tPHL1, tPLH1VDD= 15 V, VIN= VDDor GND All 9 1/ 170 ns 9 600 VDD= 5.0 V, VIN= VDDor GND All 10, 11 810 M, D, P, L, R 2/ All 9 810 VDD= 10 V, VIN= VDDor GND 9 1/ 250 Propagation delay time, CLOCK to CARRY OUT 4/ tPHL2, tPLH2VDD= 15 V, VIN= VDDor GND All 9 1/ 160 ns 9 530 VDD= 5.0 V, VIN= VDDor GND All 10, 11 716 M, D, P, L, R 2/ All 9 716 VDD= 10 V, VIN= V