DLA SMD-5962-96725 REV D-1999 MICROCIRCUIT DIGITAL RADIATION HARDENED ADVANCED CMOS OCTAL TRANSPARENT LATCH WITH THREE-STATE OUTPUTS TTL COMPATIBLE INPUTS MONOLITHIC SILICON《抗辐射互补金.pdf

1、REVISIONSLTR DESCRIPTION DATE (YR -MO -DA) APPROVEDA Changes IAW NOR 5962-R336-97 - cfs 97-10-22 Monica L. PoelkingB Changes IAW NOR 5962-R101-98 - thl 98-05-04 Raymond L. MonninC Add device class T criteria. Editorial changes throughout. - jak 98-12-07 Monica L. PoelkingD Correct the Total Dose Rat

2、e and update RHA levels. LTG 99-04-28 Monica L. PoelkingREVSHEETREV C C C C C C C C C C CSHEET 15 16 17 18 19 20 21 22 23 24 25REV STATUS REV D C D C C D D D D C C C C COF SHEETS SHEET 1 2 3 4 5 6 7 8 9 10 11 12 13 14PMIC N/A PREPARED BY Thanh V. NguyenDEFENSE SUPPLY CENTER COLUMBUSSTANDARDMICROCIRC

3、UITDRAWINGCHECKED BYThanh V. NguyenCOLUMBUS, OHIO 43216THIS DRAWING IS AVAILABLEFOR USE BY ALLDEPARTMENTSAPPROVED BYMonica L. PoelkingMICROCIRCUIT, DIGITAL, RADIATION HARDENED,ADVANCED CMOS, OCTAL TRANSPARENT LATCH WITH THREE-STATE OUTPUTS, TTL COMPATIBLEAND AGENCIES OF THEDEPARTMENT OF DEFENSE DRAW

4、ING APPROVAL DATE 95-12-28INPUTS, MONOLITHIC SILICONAMSC N/A REVISION LEVELDSIZEACAGE CODE67268 5962-96725SHEET 1 OF 25DSCC FORM 2233APR 97 5962 -E 232-99DISTRIBUTION STATEMENT A . Approved for public release; distribution is unlimited.Provided by IHSNot for ResaleNo reproduction or networking permi

5、tted without license from IHS-,-,-STANDARDMICROCIRCUIT DRAWINGSIZEA 5962-96725DEFENSE SUPPLY CENTER COLUMBUSCOLUMBUS, OHIO 43216-5000 REVISION LEVEL C SHEET 2DSCC FORM 2234APR 971. SCOPE1.1 Scope . This drawing documents three product assurance class levels consisting of high reliability (device cla

6、sses Q and M),space application (device class V) and for appropriate satellite and similar applications (device class T). A choice of case outlinesand lead finishes are available and are reflected in the Part or Identifying Number (PIN). When available, a choice of RadiationHardness Assurance (RHA)

7、levels are reflected in the PIN. For device class T, the user is encouraged to review the manufacturersQuality Management (QM) plan as part of their evaluation of these parts and their acceptability in the intended application.1.2 PIN . The PIN is as shown in the following example:5962 F 96725 01 V

8、X CFederal RHA Device Device Case Lead stock class designator type class outli ne finishdesignator (see 1.2.1) (see 1.2.2) designator (see 1.2.4) (see 1.2.5) / ( see 1.2.3)/ Drawing number1.2.1 RHA designator . Device classes Q, T and V RHA marked devices meet the MIL-PRF-38535 specified RHA levels

9、and aremarked with the appropriate RHA designator. Device class M RHA marked devices meet the MIL-PRF-38535, appendix Aspecified RHA levels and are marked with the appropriate RHA designator. A dash ( -) indicates a non -RHA device.1.2.2 Device type(s) . The device type(s) identify the circuit funct

10、ion as follows:Device type Generic number Circuit function01 ACTS573 Radiati on hardened, SOS, advanced CMOS,octal transparent latch with three-state outputs,TTL compatible inputs02 ACTS573- 02 1 / Radiation hardened, SOS, advanced CMOS,octal transparent latch with three-state outputs,TTL compatible

11、 inputs1.2.3 Device class designator . The device class designator is a single letter identifying the product assurance level as follows:Device class Device requirements documentationM Vendor self -certification to the requirements for MIL-STD-883 compliant, non -JANclass level B microcircuits in ac

12、cordance with MIL-PRF-38535, appendix AQ, V Certification and qualification to MIL-PRF-38535T Certification and qualification to MIL-PRF-38535 with performance as specifiedin the device manufacturers approved quality management plan.1.2.4 Case outline(s) . The case outline(s) are as designated in MI

13、L-STD-1835 and as follows:Outline letter Descriptive designator Terminals Package styleR CDIP2-T20 20 Dual-in-lineX CDFP4-F20 20 Flat pack1 / Device type -02 is the same as device type -01 except that the device type -02 products are manufactured at an overseaswafer foundry. Device type -02 is used

14、to positively identify, by marketing part number and by brand of the actual device,material that is supplied by an overseas foundry.Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARDMICROCIRCUIT DRAWINGSIZEA 5962-96725DEFENSE SUPPLY CENTER COLU

15、MBUSCOLUMBUS, OHIO 43216-5000 REVISION LEVEL D SHEET 3DSCC FORM 2234APR 971.2.5 Lead finish . The lead finish is as specified in MIL-PRF-38535 for device classes Q, T and V or MIL-PRF-38535,appendix A for device class M.1.3 Absolute maximum ratings . 1 / 2 / 3 /Supply voltage range (V CC ) . -0.5 V

16、dc to +7.0 V dcDC input voltage range (V IN ) . -0.5 V dc to V CC + 0.5 V dcDC output voltage range (V OUT ) -0.5 V dc to V CC + 0.5 V dcDC input current, any one input (I IN ) . 10 mADC output current, any one output (I OUT ) . 50 mAStorage temperature range (T STG ) -65 C to +150 CLead temperature

17、 (soldering, 10 seconds) +265 CThermal resistance, junction -to -case ( JC ):Case outline R . 24 C/WCase outline X . 28 C/WThermal resistance, junction -to -ambient ( JA ):Case outline R . 72 C/WCase outline X . 107 C/WJunction temperature (T J ) . +175 CMaximum package power dissipation at T A = +1

18、25 C (P D ) : 4 /Case outline R . 0.69 WCase outline X . 0.47 W1.4 Recommended operating conditions . 2 / 3 /Supply voltage range (V CC ) . +4.5 V dc to +5.5 V dcInput voltage range (V IN ) . +0.0 V dc to V CCOutput voltage range (V OUT ) . +0.0 V dc to V CCMaximum low level input voltage (V IL ) .

19、0.8 VMinimum high level input voltage (V IH ) V CC /2Case operating temperature range (T C ) . -55 C to +125 CMaximum input rise and fall time at V CC = 4.5 V ( t r , t f ) 10 ns/V1.5 Radiation features :Maximum total dose available (dose rate = 50 300 rad ( Si)/s)(Device classes M ,Q, or V) . 3 x 1

20、0 5 Rads (Si)(Device class T) 1 x 10 5 Rads (Si)Single event phenomenon (SEP) effectivelinear energy threshold (LET) no upsets (see 4.4.4.4) 100 MeV/(cm 2 /mg) 5 /Dose rate upset (20 ns pulse) 1 x 10 11 Rads (Si)/ s 5 /Latch-up None 5 /Dose rate survivability . 1 x 10 12 Rads (Si)/ s 5 /1 / Stresses

21、 above the absolute maximum rating may cause permanent damage to the device. Extended operation at themaximum levels may degrade performance and affect reliability.2 / Unless otherwise noted, all voltages are referenced to GND.3 / The limits for the parameters specified herein shall apply over the f

22、ull specified V CC range and case temperature range of-55 C to +125 C unless otherwise noted.4 / If device power exceed s package dissipation capability, provide heat sinking or derate linearly (the derating is based on JA ) atthe following rate:Case outline R 13.9 mW/ CCase outline X . 9.3 mW/ C5 /

23、 Guaranteed by design or process but not tested.Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARDMICROCIRCUIT DRAWINGSIZEA 5962-96725DEFENSE SUPPLY CENTER COLUMBUSCOLUMBUS, OHIO 43216-5000 REVISION LEVEL C SHEET 4DSCC FORM 2234APR 972. APPLICA

24、BLE DOCUMEN TS2.1 Government specification, standards, and handbooks . The following specification, standards, and handbooks form a part ofthis drawing to the extent specified herein. Unless otherwise specified, the issues of these documents are those listed in the issueof the Department of Defense

25、Index of Specifications and Standards ( DoDISS) and supplement thereto, cited in the solicitation.SPECIFICATIONDEPARTMENT OF DEFENSEMIL-PRF-38535 - Integrated Circuits, Manufacturing, General Specification for.STANDARDSDEPARTMENT OF DEFENSEMIL -STD -883 - Test Method Standard Microcircuits.MIL-STD-9

26、73 - Configuration Management.MIL-STD-1835 - Interface Standard For Microcircuit Case Outlines.HANDBOOKSDEPARTMENT OF DEFENSEMIL-HDBK-103 - List of Standard Microcircuit Drawings ( SMDs ).MIL -HDBK -780 - Standard Microcircuit Drawings.(Unless otherwise indicated, copies of the specification, standa

27、rds, and handbooks are available from the StandardizationDocument Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.)2.2 Order of precedence . In the event of a conflict between the text of this drawing and the references cited herein, the text ofthis drawing takes precedence.

28、 Nothing in this document, however, supersedes applicable laws and regulations unless a specificexemption has been obtained.3. REQUIREMENTS3.1 Item requirements . The individual item requirements for device classes Q, T and V shall be in accordance withMIL-PRF-38535 and as specified herein or as mod

29、ified in the device manufacturers Quality Management (QM) plan. Themodification in the QM plan shall not affect the form, fit, or function as described herein. The individual item requirements for deviceclass M shall be in accordance with MIL-PRF-38535 , appendix A and as specified herein.3.1.1 Micr

30、ocircuit die . For the requirements for microcircuit die, see appendix A to this document.3.2 Design, construction, and physical dimensions . The design, construction, and physical dimensions shall be as specified inMIL-PRF-38535 and herein for device classes Q, T and V or MIL-PRF-38535, appendix A

31、and herein for device class M.3.2.1 Case outlines . The case outlines shall be in accordance with 1.2.4 herein.3.2.2 Terminal connections . The terminal connections shall be as specified on figure 1.3.2.3 Truth table . The truth table shall be as specified on figure 2.3.2.4 Logic diagram . A represe

32、ntative logic diagram shall be as specified on figure 3.3.2.5 Switching waveforms and test circuit . The switching waveforms and test circuit shall be as specified on figure 4.3.2.6 Irradiation test connections . The irradiation test connections shall be as specified in table III.Provided by IHSNot

33、for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARDMICROCIRCUIT DRAWINGSIZEA 5962-96725DEFENSE SUPPLY CENTER COLUMBUSCOLUMBUS, OHIO 43216-5000 REVISION LEVEL C SHEET 5DSCC FORM 2234APR 973.3 Electrical performance characteristics and postirradiation parameter limi

34、ts . Unless otherwise specified herein, the electricalperformance characteristics and postirradiation parameter limits are as specified in table I and shall apply over the full case operatingtemperature range.3.4 Electrical test requirements . The electrical test requirements shall be the subgroups

35、specified in table IIA. The electrical testsfor each subgroup are defined in table I.3.5 Marking . The part shall be marked with the PIN listed in 1.2 herein. In addition, the manufacturers PIN may also be markedas listed in MIL-HDBK-103. For packages where marking of the entire SMD PIN number is no

36、t feasible due to space limitations, themanufacturer has the option of not marking the “5962-“ on the device. For RHA product using this option, the RHA designatorshall still be marked. Marking for device classes Q, T and V shall be in accordance with MIL-PRF-38535. Marking for device classM shall b

37、e in accordance with MIL-PRF-38535, appendix A.3.5.1 Certification/compliance mark . The certification mark for device classes Q, T and V shall be a “QML“ or “Q“ as required inMIL-PRF-38535. The compliance mark for device class M shall be a “C“ as required in MIL-PRF-38535, appendix A.3.6 Certificat

38、e of compliance . For device classes Q, T and V, a certificate of compliance shall be required from a QML -38535listed manufacturer in order to supply to the requirements of this drawing (see 6.6.1 herein). For device class M, a certificate ofcompliance shall be required from a manufacturer in order

39、 to be listed as an approved source of supply in MIL-HDBK-103 (see6.6.2 herein). The certificate of compliance submitted to DSCC -VA prior to listing as an approved source of supply for this drawingshall affirm that the manufacturers product meets, for device classes Q, T and V, the requirements of

40、MIL-PRF-38535 and hereinor for device class M, the requirements of MIL-PRF-38535, appendix A and herein.3.7 Certificate of conformance . A certificate of conformance as required for device classes Q, T and V inMIL-PRF-38535 or for device class M in MIL-PRF-38535, appendix A shall be provided with ea

41、ch lot of microcircuits delivered tothis drawing.3.8 Notification of change for device class M . For device class M, notification to DSCC -VA of change of product (see 6.2 herein)involving devices acquired to this drawing is required for any change as defined in MIL-STD-973.3.9 Verification and revi

42、ew for device class M . For device class M, DSCC, DSCCs agent, and the acquiring activity retain theoption to review the manufacturers facility and applicable required documentation. Offshore documentation shall be made availableonshore at the option of the reviewer.3.10 Microcircuit group assignmen

43、t for device class M . Device class M devices covered by this drawing shall be in microcircuitgroup number 38 (see MIL-PRF-38535, appendix A).Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARDMICROCIRCUIT DRAWINGSIZEA 5962-96725DEFENSE SUPPLY C

44、ENTER COLUMBUSCOLUMBUS, OHIO 43216-5000 REVISION LEVEL D SHEET 6DSCC FORM 2234APR 97TABLE I. Electrical performance characteristics .Test Symbol Test conditions 1 /-55 C T C +125 Cunless otherwise specifiedDevicetypeV CC Group AsubgroupsLimits 2 / UnitMin MaxHigh level outputvoltageV OH3 /For all in

45、puts affectingOutput under testV IN = 2.25 V or 0.8 VFor all other inputsAll 4.5 V 1, 2, 3 4.40 VV IN = V CC or GNDI OH = -50 A M, D, P, L, R, F 4 / All 1 4.40For all inputs affectingOutput under testV IN = 2.75 V or 0.8 VFor all other inputsAll 5.5 V 1, 2, 3 5.40V IN = V CC or GNDI OH = -50 A M, D,

46、 P, L, R, F 4 / All 1 5.40Low level outputvoltageV OL3 /For all inputs affectingOutput under testV IN = 2.25 V or 0.8 VFor all other inputsAll 4.5 V 1, 2, 3 0.1 VV IN = V CC or GNDI OL = 50 A M, D, P, L, R, F 4 / All 1 0.1For all inputs affectingOutput under testV IN = 2.75 V or 0.8 VFor all other i

47、nputsAll 5.5 V 1, 2, 3 0.1V IN = V CC or GNDI OL = 50 A M, D, P, L, R, F 4 / All 1 0.1Input current highI IH For input under test, V IN = 5.5 VFor all other inputsV IN = V CC or GNDAll 5.5 V 1 +0.5 A2, 3 +1.0M, D, P, L, R, F4 /All 1 +1.0Input current lowI IL For input under test, V IN = GNDFor all o

48、ther inputsV IN = V C C or GNDAll 5.5 V 1 -0.5 A2, 3 -1.0M, D, P, L, R, F4 /All 1 -1.0See footnotes at end of table.Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARDMICROCIRCUIT DRAWINGSIZEA 5962-96725DEFENSE SUPPLY CENTER COLUMBUSCOLUMBUS, OHIO 43216-5000 REVISION LEVEL D SHEET 7DSCC FORM 2234APR 97TABLE I. Electrical performance characteristics - Continued.Test Symbol Test conditions 1 /-55 C T C +125 Cunless otherwise specifiedDevicetypeV CC Group AsubgroupsLimits