DLA SMD-5962-96729 REV B-2011 MICROCIRCUIT LINEAR 9-CHANNEL DIFFERENTIAL TRANSCEIVER MONOLITHIC SILICON.pdf

1、 REVISIONS LTR DESCRIPTION DATE (YR-MO-DA) APPROVED A Drawing updated to reflect current requirements. Editorial changes occur throughout. -les. 00-09-06 Raymond Monnin B Redraw. Update drawing to current requirements. - drw 11-01-11 Charles F. Saffle REV SHET REV B SHET 15 REV STATUS REV B B B B B

2、B B B B B B B B B OF SHEETS SHEET 1 2 3 4 5 6 7 8 9 10 11 12 13 14 PMIC N/A PREPARED BY Dan Wonnell DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 http:/www.dscc.dla.mil STANDARD MICROCIRCUIT DRAWING THIS DRAWING IS AVAILABLE FOR USE BY ALL DEPARTMENTS AND AGENCIES OF THE DEPARTMENT OF DEFENSE CHEC

3、KED BY Sandra Rooney APPROVED BY Michael A. Frye MICROCIRCUIT, LINEAR, 9-CHANNEL DIFFERENTIAL TRANSCEIVER, MONOLITHIC SILICON DRAWING APPROVAL DATE 96-01-02 AMSC N/A REVISION LEVEL B SIZE A CAGE CODE 67268 5962-96729 SHEET 1 OF 15 DSCC FORM 2233 APR 97 5962-E091-11 Provided by IHSNot for ResaleNo re

4、production or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-96729 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL B SHEET 2 DSCC FORM 2234 APR 97 1. SCOPE 1.1 Scope. This drawing documents two product assurance class levels consisting of h

5、igh reliability (device classes Q and M) and space application (device class V). A choice of case outlines and lead finishes are available and are reflected in the Part or Identifying Number (PIN). When available, a choice of Radiation Hardness Assurance (RHA) levels is reflected in the PIN. 1.2 PIN

6、. The PIN is as shown in the following example: 5962 - 96729 01 Q X A Federal stock class designator RHA designator (see 1.2.1) Device type (see 1.2.2)Device class designatorCase outline (see 1.2.4) Leadfinish (see 1.2.5) / (see 1.2.3) / Drawing number 1.2.1 RHA designator. Device classes Q and V RH

7、A marked devices meet the MIL-PRF-38535 specified RHA levels and are marked with the appropriate RHA designator. Device class M RHA marked devices meet the MIL-PRF-38535, appendix A specified RHA levels and are marked with the appropriate RHA designator. A dash (-) indicates a non-RHA device. 1.2.2

8、Device type. The device type identifies the circuit function as follows: Device type Generic number Circuit function 01 55LBC976 9-channel differential transceiver 1.2.3 Device class designator. The device class designator is a single letter identifying the product assurance level as follows: Device

9、 class Device requirements documentation M Vendor self-certification to the requirements for MIL-STD-883 compliant, non-JAN class level B microcircuits in accordance with MIL-PRF-38535, appendix A Q or V Certification and qualification to MIL-PRF-38535 1.2.4 Case outline. The case outline are as des

10、ignated in MIL-STD-1835 as follows: Outline letter Descriptive designator Terminals Package style X GDFP1-F56 56 Flat pack 1.2.5 Lead finish. The lead finish is as specified in MIL-PRF-38535 for device classes Q and V or MIL-PRF-38535, appendix A for device class M. Provided by IHSNot for ResaleNo r

11、eproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-96729 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL B SHEET 3 DSCC FORM 2234 APR 97 1.3 Absolute maximum ratings. 1/, 2/ Supply voltage (VCC) -0.3 V to +7 V dc Voltage range at

12、 any bus terminal -10 V dc to +15 V dc Data I/O and control (A-side) voltage range . -0.3 V to +7 V dc Continuous power dissipation (PD) internally limited Thermal resistance, junction-to-case (JC) 6C/W Thermal resistance, junction-to-ambient (JA) . 95C/W Storage temperature range (TSTG) . -65C to +

13、150C Lead temperature, soldering 1.6 mm (1/16 inch) from case for 10 seconds . +260C 1.4 Recommended operating conditions. Supply voltage range (VCC) . +4.75 V dc min, +5.25 V dc max Voltage at any bus terminal (separately or common mode), (VO, VIor VIC) (B+ or B-) -7 V dc min, +12 V dc max High lev

14、el input voltage, (VIH) (all except B+ and B-) . +2 V dc min Low level input voltage, (VIL) (all except B+ and B-) +0.8 V dc max High-level output current, (IOH) (B+ or B-) -60 mA Max (A) -8 mA max Low-level output current, (IOL) (B+ or B-) . +60 mA max (A) . +8 mA max Operating free-air temperature

15、 (TA) . -55C to +125C 2. APPLICABLE DOCUMENTS 2.1 Government specification, standards, and handbooks. The following specification, standards, and handbooks form a part of this drawing to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the sol

16、icitation or contract. DEPARTMENT OF DEFENSE SPECIFICATION MIL-PRF-38535 - Integrated Circuits, Manufacturing, General Specification for. DEPARTMENT OF DEFENSE STANDARDS MIL-STD-883 - Test Method Standard Microcircuits. MIL-STD-1835 - Interface Standard Electronic Component Case Outlines. DEPARTMENT

17、 OF DEFENSE HANDBOOKS MIL-HDBK-103 - List of Standard Microcircuit Drawings. MIL-HDBK-780 - Standard Microcircuit Drawings. (Copies of these documents are available online at https:/assist.daps.dla.mil/quicksearch/ or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Phi

18、ladelphia, PA 19111-5094.) 2.2 Order of precedence. In the event of a conflict between the text of this drawing and the references cited herein, the text of this drawing takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a specific exemption has be

19、en obtained. _ 1/ Stresses above the absolute maximum rating may cause permanent damage to the device. Extended operation at the maximum levels may degrade performance and affect reliability. 2/ All voltage values are with respect to GND. Provided by IHSNot for ResaleNo reproduction or networking pe

20、rmitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-96729 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL B SHEET 4 DSCC FORM 2234 APR 97 3. REQUIREMENTS 3.1 Item requirements. The individual item requirements for device classes Q and V shall be in accordanc

21、e with MIL-PRF-38535 and as specified herein or as modified in the device manufacturers Quality Management (QM) plan. The modification in the QM plan shall not affect the form, fit, or function as described herein. The individual item requirements for device class M shall be in accordance with MIL-P

22、RF-38535, appendix A for non-JAN class level B devices and as specified herein. 3.2 Design, construction, and physical dimensions. The design, construction, and physical dimensions shall be as specified in MIL-PRF-38535 and herein for device classes Q and V or MIL-PRF-38535, appendix A and herein fo

23、r device class M. 3.2.1 Case outline. The case outline shall be in accordance with 1.2.4 herein. 3.2.2 Terminal connections. The terminal connections shall be as specified on figure 1. 3.3 Electrical performance characteristics and postirradiation parameter limits. Unless otherwise specified herein,

24、 the electrical performance characteristics and postirradiation parameter limits are as specified in table I and shall apply over the full ambient operating temperature range. 3.4 Electrical test requirements. The electrical test requirements shall be the subgroups specified in table II. The electri

25、cal tests for each subgroup are defined in table I. 3.5 Marking. The part shall be marked with the PIN listed in 1.2 herein. In addition, the manufacturers PIN may also be marked. For packages where marking of the entire SMD PIN number is not feasible due to space limitations, the manufacturer has t

26、he option of not marking the “5962-“ on the device. For RHA product using this option, the RHA designator shall still be marked. Marking for device classes Q and V shall be in accordance with MIL-PRF-38535. Marking for device class M shall be in accordance with MIL-PRF-38535, appendix A. 3.5.1 Certi

27、fication/compliance mark. The certification mark for device classes Q and V shall be a “QML“ or “Q“ as required in MIL-PRF-38535. The compliance mark for device class M shall be a “C“ as required in MIL-PRF-38535, appendix A. 3.6 Certificate of compliance. For device classes Q and V, a certificate o

28、f compliance shall be required from a QML-38535 listed manufacturer in order to supply to the requirements of this drawing (see 6.6.1 herein). For device class M, a certificate of compliance shall be required from a manufacturer in order to be listed as an approved source of supply in MIL-HDBK-103 (

29、see 6.6.2 herein). The certificate of compliance submitted to DLA Land and Maritime-VA prior to listing as an approved source of supply for this drawing shall affirm that the manufacturers product meets, for device classes Q and V, the requirements of MIL-PRF-38535 and herein or for device class M,

30、the requirements of MIL-PRF-38535, appendix A and herein. 3.7 Certificate of conformance. A certificate of conformance as required for device classes Q and V in MIL-PRF-38535 or for device class M in MIL-PRF-38535, appendix A shall be provided with each lot of microcircuits delivered to this drawing

31、. 3.8 Notification of change for device class M. For device class M, notification to DLA Land and Maritime -VA of change of product (see 6.2 herein) involving devices acquired to this drawing is required for any change that affects this drawing. 3.9 Verification and review for device class M. For de

32、vice class M, DLA Land and Maritime, DLA Land and Maritimes agent, and the acquiring activity retain the option to review the manufacturers facility and applicable required documentation. Offshore documentation shall be made available onshore at the option of the reviewer. 3.10 Microcircuit group as

33、signment for device class M. Device class M devices covered by this drawing shall be in microcircuit group number 77 (see MIL-PRF-38535, appendix A). Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-96729 DLA

34、LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL B SHEET 5 DSCC FORM 2234 APR 97 TABLE I. Electrical performance characteristics. Test Symbol Conditions -55C TA+125C 4.75 V VCC 5.25 V Group A subgroups Device type Limits Unit unless otherwise specified Min Max High-level input current IIHB

35、SR, A, DE/RE and CRE VIH= 2 V See figure 4 1, 2, 3 All -200 A CDE0, CDE1, and CDE2 100 Low-level input current IILBSR, A, DE/RE and CRE VIL= 0.8 V See figure 4 1, 2, 3 All -200 A CDE0, CDE1, and CDE2 100 Supply current ICCAll drivers and receivers disabled, BSR and CDEO = 5 V, All other inputs = 0 V

36、 1, 2, 3 All 5 mA All receivers enabled, No load, VID= 5 V, All other inputs = 0 V 50 All drivers enabled, BSR = 0 V, No load, All other inputs = 5 V 15 Driver Differential output voltage |VOD| Vtest= -7 V to 12 V, See Figure 3 1, 2, 3 All 1 V Output short-circuit current IOSSee Figure 2 1, 2, 3 All

37、 250 mA Receiver High-level output voltage VOHVID= 200 mV, IOH= -8 mA, See Figure 4 1, 2, 3 All 2.5 V Low-level output voltage VOLVID= -200 mV, IOH= 8 mA, See Figure 4 1, 2, 3 All 0.8 V Positive-going threshold voltage 1/ VIT+IOH = -8 mA, See Figure 4 1, 2 All 0.2 V 3 0.5Negative-going threshold vol

38、tage VIT-IOL = 8 mA, See Figure 4 1, 2, 3 All -0.2 V See footnotes at end of table. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-96729 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL B SHEET

39、 6 DSCC FORM 2234 APR 97 TABLE I. Electrical performance characteristics - continued. Test Symbol Conditions -55C TA+125C 4.75 V VCC 5.25 V Group A subgroups Device type Limits Unit unless otherwise specified Min Max Receiver input current (B+ and B-) IIVI= 12 V, VCC= 5 V, Other input = 0 V, See Fig

40、ure 4 1, 2, 3 All 1.5 mA VI= 12 V, VCC= 0 V, Other input = 0 V, See Figure 4 1.5 VI= -7 V, VCC= 5 V, Other input = 0 V, See Figure 4 -1 VI= -7 V, VCC= 0 V, Other input = 0 V, See Figure 4 -1 High-impedance-state output current IOZSee Figure 4 VO= GND 1, 2, 3 All -200 A O= VCC50 Functionals See 4.4.1

41、 b. 7, 8 All Driver (See figure 5) Differential delay time, high-to-low-level output (tdDH) or low-to-high-level output (tdDL) tdDVCC= 5.0 V 9 All 9 17 ns VCC= 4.75 V to 5.25 V 10, 11 4 30 Skew limit, the maximum difference in propagation delay times between any two drivers on any two devices 2/ tsk

42、 (lim) VCC= 5.0 V 9 All 8 ns VCC= 4.75 V to 5.25 V 9, 10, 11 12 Pulse skew (|tdDL- tdDH|) tsk(p)VCC= 4.75 V to 5.25 V 9, 10, 11 All 6 ns Receiver (See figure 6) Propagation delay time, high-to-low-level output (tPLH) or low-to-high-level output (tPHL) tpdVCC= 5.0 V 9 All 21 31 ns VCC= 4.75 V to 5.25

43、 V 10, 11 16 36 Skew limit, the maximum difference in propagation delay times between any two drivers on any two devices 2/ tsk (lim) VCC= 5.0 V 9 All 8 ns VCC= 4.75 V to 5.25 V 10, 11 12 Pulse skew (|tPHL- tPLH|) tsk(p)VCC= 4.75 V to 5.25 V 9, 10 All 6 ns 11 10See footnotes at end of table. Provide

44、d by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD MICROCIRCUIT DRAWING SIZE A 5962-96729 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL B SHEET 7 DSCC FORM 2234 APR 97 TABLE I. Electrical performance characteristics - continued. Test

45、Symbol Conditions -55C TA+125C 4.75 V VCC 5.25 V Group A subgroups Device type Limits Unit unless otherwise specified Min Max Transceiver Enable time, transmit-to-receive to low-level output 3/ ten (RXL) See Figure 7 9, 10, 11 All 180 ns Enable time, transmit-to-receive to high-level output 3/ ten (

46、RXH) 9, 10, 11 All 180 ns Enable time, receive-to-transmit to low-level output 3/ ten (TXL) 9, 10, 11 All 110 ns Enable time, receive-to-transmit to high-level output 3/ ten (TXH) 9, 10, 11 All 110 ns Setup time, CDEO, CDE1, CDE2, BSR, or CRE to active input(s) or output(s) 3/ tsu9, 10, 11 All 180 n

47、s 1/ This specification may not meet RS-485 or SCSI standards at -55C. 2/ This specification applies to any 5C band within the operating range. 3/ This parameter is guaranteed but not tested. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-STANDARD M

48、ICROCIRCUIT DRAWING SIZE A 5962-96729 DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990 REVISION LEVEL B SHEET 8 DSCC FORM 2234 APR 97 Device type 01 Device type 01 Case outlines X Case outlines X Terminal number Terminal symbol Terminal number Terminal symbol 1 GND 29 1B- 2 BSR 30 1B+ 3 CRE 31 2B- 4 1A 32 2B+ 5 1DE/ RE 33 3B- 6 2A 34 3B+ 7 2DE/ RE 35 4B- 8 3A 36 4B+ 9 3DE/ RE 37 5B- 10 4A 38 5B+ 11 4DE/ RE 39 VCC12 VCC40 GND 13 GND 41 GND 14 GND 42 GND 15 GND 43 GND 1