DOD A-A-0051864-1987 HOOK DURA (ADSON AND FRAZIER)《硬脑(脊)膜钩》.pdf

1、A-A-0051864 65 = 7777774 0028667 7 Salient characteristics. P-YI -I I A-A-0051864 (DM) 3 APRIL 1987 INTERIM COMMERCIAL ITEM DESCRIPTION HOOK, DURA (Adson and Frazier) The General Services Administration has authorized the use of this interim commercial item description which was developed by the Def

2、ense Personnel Support Center, Directorate of Medical Materiel, DPSC-RST, 2800 South 20th Street, Philadelphia, PA, 19101, based upon currently available technical information. This interim commercial item description covers Adson and Frazier nerve hooks. Classification. Hooks shall be of the follow

3、ing types and styles , as specified . Type I Frazier Style A Sharp Type II Adson Style B Blunt Material. Hooks shall be manufactured from martensitic corrosion-resistant steel in accordance with American Society for Testing and Materials (ASTM) Standard F899. Hardness. Hooks shall have a Rockwell ha

4、rdness of HRC 48- 53. As an alternate, hooks manufactured from corrosion resistant steel with less than 0.22% carbon shall have a Rockwell hardness of HRC 45-50. Style and design. 1. Hooks shall be in accordance with Figure Passivation. Hooks shall be properly passivated. Finish. The finish shall be

5、 mirror or satin. The finish shall be uniform and free from burrs, chips, pits, rough areas, and grind or tool marks. AMSC N/A FSC 6515 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. THIS DOCUMENT COFITAINS PAGES. Licensed by Information Handling ServicesIdentiicat

6、ion markincrs, Hooks shall be permanently marked with the manufacturers name or registered trademark and the word “gtafnless.“ In addition, hooks of foreign manufacture shall bear the name of the country of manufacture. Corrosion resistance. Hooks shall be tested or corrosion resistance as specified

7、 undei: Quality Assurance Provisions, Workmanship. The hooks shall be processed in such a manner a6 to be uniorm and ree from defects which aect li., utility, or appearance, Product Quality Level Visual and dimensional examination, Shall be examined to verffy that design, construction and workmanshi

8、p are in accordance with applicable requirements. Mateclah, tests to amure that: materials are in accordance with requiiements speciied. The supplier shall be responsible for pexforming - Unit, Each (EA) , One hook, o the type specified, constitutes one unit, Qunlty Assurance Provisions, Responsibil

9、ity or inspection, Unless otherwise specified in the contEaet or purchase order, the contractor is responsible or the pereormance bf all inspection requirements as specified herein, Except as otherwise specilied in the contract or purchase order, the contractor may use his own or any facilities suit

10、able or: the performance o the inspection requirements specified herein, unless disapproved by the Government. The Government reserves the right to perform any of the inspections set: forth in the speciication where such inspections are deemed necessrary to assure supplies and services conform to pr

11、escribed xequirements, RecoEds. Records of examinations and tests performed by or or the contractor: shall be maintained by the contractor and made available to the Government upon the Governments request, at any time, or from time to time, during the performance OE the contract and for a period of

12、three years after delivery of the supplies to which such rcords relate, 2 Licensed by Information Handling ServicesA-A-0051864 (DM) Inspection. Inspection, as used herein, is defined as both examination (such as visual or auditory investigation without the use of special laboLatory appliances or pro

13、cedures) and testing (determination by technical means of physical and chemical properties) of the item. compliance with all requirements contained in this specification. specification requirements. shall be used for the determination of two or more test characteristics. Sampling for tests shall be

14、conducted in accordance with MIL-STD-105 and as specified herein. The unit of product for test purposes shall be one hook, level S-1, AQL 1.0. Examination. The hooks shall be examined to determine Tests. Tests shall be conducted to determine compliance with Where feasible, the same sample Sampling f

15、or tests. Sampling shall be Tests. Hardness. Hardness shall be tested in accordance with ASTM Standard E18. Corrosion-resistance. Hooks shall be tested for corrosion resistance in accordance with the Resistance to Boil and Resistance to Copper Sulfate tests of Federal Specification GG-1-526. Contrac

16、tor certification. The contractor shall certify that the product offered meets the salient characteristics of this description and conforms to the producers own drawings, specification, standard, and quality assurance practices. The Government reserves the right to require proof of such conformance

17、prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract. Regulatory requirements. Federal Food, Drug and Cosmetic Act. If the product covered bv this document has been determined by the U.S. Food and Drug A2ministration to be under its jurisdictio

18、n, the offeror/contractor shall comply, and be responsible for compliance by its subcontractors/suppliers, with the requirements of the Federal Food, Drug and Cosmetic Act, as amended, and regulations promulgated thereunder. offeror/contractor shall comply, and be responsible for compliance by its s

19、ubcontractors/suppliers, with the requirements of all other applicable Federal, State, and local statutes, 3 In addition, the 0 ordinances, and regulations. Licensed by Information Handling ServicesA-A-O051864 (DM) Recovered materials, The offeror/contractor is encouraged to use recovered material i

20、n accordance with Public Law 94-580 to the maximum extent practical. Preservation, packaqinq, packing, labeling, and marking. Unless otherwise specified, preservation, packaging, and packing shall be to a degree of protection to preclude damage to containers and/or content8 thereof under normal ship

21、ping conditions, handling, etc., involving shipment lxom the supply source to the receiving activity, plus reshipment from receiving activity, and ahall conform to applicable carriers rules and regulations, Intermediate and exterior package quantities and labeling and marking ehall be as specified i

22、n the contract and/or order, NOTE: The following National Stock Numbers are covered by this document: NSN - ITEM SPECIFICATION SPECIFICATION PDEEFICATION TYPE 7 STYLE 6515-00-342-2300 HOOK, DURA, Adson, II Sharp, 8 Inch 6515-00-342-2500 HOOK, DURA, Frazier, I Sharp, 5 Inch 6515-01-117-7158 HOOK, DUR

23、AI AdSon, II Blunt, 8 Inch A A B Jntened use. Hooks are intended for lifting the dura mater dur5ng neurosurgical procedures. Ordering data (Intermediate/exterior package quantities and labeling and marking must be specified in the contxact and/or OLdeE) t MILITARY INTERESTS: Preparing Activity: Cust

24、odians: DOD-MB Army - MD Navy - MS Air Force - 03 Agent: DLA-DM CIVIL AGENCY COORDINATING ACTIVITIES: VA-OSS PHS FDA-MPQAS PGC-0 5 2 9 4 Project No, 6515-4042 4 Licensed by Information Handling ServicesA-A-005L64 65 m 4777774 0028673 7 P r -I rn XI 2 P -1 m E P .z U r m UI m CI O z u =! A-Ai3051864 (DM) m I el .- e W 0 5t 5 Licensed by Information Handling Services