DOD A-A-51207-1985 WEDGE AND WEDGE SET DENTAL (WOOD)《木制牙科楔入装置》.pdf

1、A-A- 5 1 20 7 12 December 1985 1 2 3 COMMERCIAL ITEM DESCRIPTION Green . 13 T 1.7 13 200 400 Yellow 13 2.0 13 200 1.4 13 100 Orange 13 UT Green 13 T 1.7 13 Yellow 13 2.0 13 100 Blue 15 2.0 15 100 Green 13 T 1.7 13 400 400 100 400 WEDGE AND WEDGE SET, DENTAL (WOOD) The General Services Administration

2、 has authorized the use of this commercial item description. This commercial item description covers.three classes of wooden wedges suitable for interproximal wedging of teeth. Class 1,2,3 Salient characteristics: Material. The wedges shall be constructed of sycamore wood, which shall resist wetting

3、, splintering, and breaking. Description. The dental wedges shall be suitable for interproximal wedging of teeth and shall provide for a contouring contact in dental restorative procedures. The wedges shall be of such design as to provide support for holding bands tightly against the tooth. curved w

4、ith concave sides, rounded tip, and a square (non-operative) end to provide ease of placement. The design of the wedges shall conform to Figure 1. Wedges shall have a smooth finish. the requirements specified in Table 1 for the class specified. The average height of the wedges at blunt end shall be

5、1.9 to 2.1 millimeters. The wedges shall be anatomically The wedges shall conform to TABLE I. Total Class Assortment and Dimensions Quantity Quantity DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. 1 Licensed by Information Handling Services- _rm - - - A-A-SL207 b5

6、E 9799974 0053543 7 E o VIEW 6-B FIG. I VIEW A-A WEDGE, DENTAL, WOO0 2 Licensed by Information Handling ServicesA-A-5 12 07 Workmanship, Wedges shall be free of splinters, cracks, and other defects that would injure soft gum tissue. Unit . Class 1 and Class 2 - Set (SE). One wedge set, as specified,

7、 constitutes one unit. Class 3 - Package (PG). One package containing 400 wedges, as specified, constitutes one unit. Quality Assurance Provisions. - Responsibility for inspection. Unless otherwise specified in the contract or purchase order, the contractor is responsible for the performance of all

8、inspection requirements as specified herein. Except as otherwise specified in the contract or purchase order, the contractor may use his own or any facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the Government reserves reserves the righ

9、t to perform any of the inspections set forth in the specification where such inspections are deemed necessary to assure supplies and services conform to prescribed requirements. Records. Records of examinations and tests performed contractor shall be maintained by the contractor and made available

10、to the Government upon the Governments request, at any time, or from time to time, during the performance of the contract and for a period of three years after delivery of the supplies to which such records relate. by or for the Inspection. Inspection, as used herein, is defined as both examination

11、(such as visual or auditory investigation without the use of special laboratory appliances or procedures) and testing (determination by technical means of physical and chemical properties) of the item. Samplins for inspection. Sampling for inspection shall be conducted in accordance with MIL-STD-105

12、. Where feasible, the same sample shall be used for the determination of two or more inspection characteristics. The unit of product for inspection purposes shall be one wedge set or package. Unless otherwise specified, sampling for examination shall be conducted at inspection level II, AQL 2.5, and

13、 sampling for tests (when applicable) shall be conducted at inspection level S-1, AQL 1.0. Contractor certification. The contractor shall certify that the product offered meets the salient characteristics of this description and conforms to the producers own drawings, specifications, standardi, assu

14、rance practices. The Government reserves the right to such conformance prior to first delivery and thereafter as provided for under the provisions of the contract. and quality require proof of may be otherwise 3 Licensed by Information Handling Services_ _.-PI_ _I- - A-A-5L207 65 - 9799974 0053543 O

15、 - A-A-5 120 7 Requlatory requirements . document has been determined by the U.S. Food and Drug Administration to be under its jurisdiction, the offeror/contractor shall comply, and be responsible for compliance by its subcontractors/suppliers, with the requirements of the Federal Food, Drug and Cos

16、metic Act, as amended, and regulations promulgated thereunder. In addition, the offeror/contractor shall comply, and be responsible for compliance by its subcontractors/suppliers, with the requirements of all other applicable Federal, State, and Local statutes, ordinances, and regulations. recovered

17、 material lin accordance with Public Law 94-580 to the maximum extent practical. Federal Food, Dru4 and Cosmetic Act. If.the product covered by this Recovered materials, The offeror/contractor is encouraged to use Preservation, packaqinq, p ackinq, labelinq, and markinq. Unless otherwise specified,

18、preservation, packaging, and packing shall be to a degree of protection to preclude damage to containers and/or contents thereof under normal shipping conditions, handling, etc., involving shipment from the supply source to the receiving activity, plus reshipment from receiving activity, and shall c

19、onform to applicable carriers rules and regulations, Intermediate and exterior package quantities and labeling and marking shall be as specified in the contract and/or order. NOTE: The following National 6520-01-053-5601 WEDGE SET Stock Numbers are covered by this document: Desiqnation DENTAL, WOOD

20、SET of 400 Class 1 6520-01-057-1266 WEDGE SET, DENTAL, WOOD, SET of 400 Class 2 6520-01-132-7948 WEDGE, DENTAL, WOOD, 400s Class 3 MILITARY INTEREST: Custodiam: Army-MD Navy-MS Ai r Fo rce-0 3 CIVILIAN AGENCY COORDINATING ACTIVITY: VA-OSS PREPARING ACTIVITY: DoD-MB Agent: DLA-DM 05919 4 Project No, 6520-1857 Licensed by Information Handling Services