DOD A-A-51307-1985 DISH CULTURE PETRI《培养皿》.pdf

1、A-A-51307 bb W 7777774 OOLOb12 7 F-73- I$ . .- A-A-51307 .- _. 20 December 1985 T. COMMERCIAL ITEM DESCRIPTION- DISH , CULTURE , PETRI , - - The General Services Administration has authorized the use -. Military Specification MIL-D-36425B. of this commercial item description in preference to . - Thi

2、s commercial item description covers a sterile, plastic , disposable Petri culture dish, with a tight lid, for use as a container for a filter disk used in membrane fil tering technique for bacteriological analysis of water under field conditions. Salient characteristics: The Petri dish shall be com

3、plete, top-and bottom, sterile and disposable. The Petri dish shall be a suitable container for Disk; Filtering, Micro- porous, (NSN 6640-00-299-8692), used with Water Testing Kit, Bacteriological, (NSN 6665-000-682-4765) , for bacteriological analysis of water in the field. The Petri dish chal 1 be

4、 fabricated of optically clear , scratch-free, polystyrene , free of toxic lubricants and other additives which would adversely affect the growth of bacterial cul tures. The Petri dish shall consist of a top section (cover) and a bottom section. The top section shall consist of a flat, circular top

5、merging into a continu slightly tapered to fit telescopically with the upstanding wall of the b section, forming a tight seal by means of a wedge fit. The bottom section shall have a flat, circular bottom and an upstanding continuous wall , slightly thicker . lower part, tapering upward to fit the t

6、op section of the dish. shoulder shall be formed on the lower part of-the bottom section-.to provide a secure closure of the Petri dish. The bottom section shall be constructed so thaY it sits flat on a plane and level surface, and provides for a uniform media depth. The bottom section shall be prov

7、ided with 3 or 4 radial lugs, slits or depressions to aid in opening the closed dish. The closed dimensions shall be 2-3/32 + 1/16 inches in diameter and 0.035 to Ol050 inches in height. An annular - - The inside of the Petri dish shall be sterile. sterilization shall be acceptable to the Food and D

8、rug Administration (FDA). Workmanship. The Petri dish shall be free from defects which detract from its appearance or impair its serviceability. The method and efficacy of FSC 6640 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. .- THIS DOCUMENT CONTAINS 3 PAGES. Pr

9、ovided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,- A-A-51307 bb M 7777774 0010b13 O W COMMERCIAL ITEM DESCRIPTION A-A-51307 Unit. Package (PG). Twenty dishes sealed container which will maintain con tain i ng twenty- f ive con tainers of constitutes one

10、unit, Quality Assurance Provisions. tops and bottoms), shall be packaged in a sterility until manually opened. twenty dishes (500 dishes), as specified, One package Responsibility for inspection. Unless otherwise specified in the contract or purchase order, the contractor is responsible for the perf

11、ormance of all inspect on requirements as specified herein. Except as otherwise specified in the contract or purchase order, the contractor may use his own or any facilities suitable for the performance of the inspection requirements specified herein , unless disapproved by the Government. The Gover

12、nment reserves the right to perform any of the inspections set forth in the specification where such inspections are deemed necessary to assure suppl ies and services conform to prescribed requirements Records. Records of examinations and tests performed by or for the contractor sha-aintained by the

13、 contractor and made available to the Government upon the Governments request, at any time, or from time to time, during the performance of the contract and for a period of three years after delivery of the supplies to which such records relate. Ins ection. Inspection, as used herein, is defined as

14、both examination (such as visua * or au itory investigation without the use of special laboratory appliances or procedures) and testing (determination by technical means of physical and chemical properties) of the item. Inspections and tests. Inspections and tests chal with commercial practice to de

15、termine compliance with Where feasible, the same sample shall be used for the test characteristics, be conducted in accordance specification requirements. determination of two or more Sampling for inspections and tests. Sampling for inspection and tests shall be conducted in accordance with commerci

16、al practice. The unit of product for test purposes shall be one Petri dish (top and bottom, complete), Contractor certification, The contractor shall certify that the product offered meets the salient characteristics of this descriDtion and conforms to the oroducers own drawings, specifications, sta

17、ndards, and quai ity assurance practices. The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract . 2 Provided by IHSNot for ResaleNo reproduction or networking permitted witho

18、ut license from IHS-,-,-.- a a a A-A-51307 66 9999774 O010614 2 - COMMERCIAL ITEM DESCRIPTION A-A-51307 Regulatory requirements. Federal Food, Drug and Cosmetic Act. If the product covered by this document has been determined by the U. S. I-ood and Drug Administration to be under its jurisdiction, t

19、he offeror/contractor shall comply, and be responsible for compliance by its subcontractors/suppliers, with the requirements of the Federal Food, Drug and Cosmetic Act , as amended, and regulations promulgated thereunder. offeror/contractor shall comply, and be responsible for cmpliance by its subco

20、ntractors/suppliers, with the requirements of all other applicable Federal, State, and local statutes, ordinances, and regulations. In addition , the Recovered materials. The offeror/contractor is encouraged to use recovered material in accordance with Public Law 94-580 to the maximum extent practic

21、al. Preservation, packaging, packing, labeling, and marking. Unless otherwise specified, preservation, packaging, and packing shall be to a degree of protection to preclude damage to containers and/or contents thereof under normal ship ing conditions plus reshipment from receiving activity, and shal

22、l conform to applicable carriers rules and regulations. marking shall be as specified in the contract and/or order. For information only. purported by the following company to meet the salient characteristics of the item handling, etc., involving shipment from the supply source to t 1 e receiving ac

23、tivity, Intermediate and exterior package quantities and labeling and The following product, as of the date of this documeit, is described herein : The following Nationa Fa1 con Labware Part No. 1006 Stock Number is covered by this document: 6640-01-030-9012 Ordering data. must be specified in the c

24、ontract and/or order.) (Intermediate/exterior package quantities and labeling and marking MILITARY INTERESTS: PREPARING ACTIVITY: Custodians: DoD-MB Amy -MD Navy-MS Ai r For ce-O3 CIVIL AGENCY COORDINATING ACTIVITY: VA-OSS 56436 Agent: DLA-DM Project No. 6640-1362 Location S3-8-20 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-