DOD A-A-54212-1990 SHEET BED (NONWOVEN)《薄片(非纺织的)》.pdf

1、 A-A-54212 72 m 7777774 005b534 3 A-A-5 42 12 31 July 1990 COMMERCIAL ITEM DESCRIPTION SHEET, BED (Nonwoven) The General Services Administration has authorized the use of this Commercial Item Description as a replacement for MIL-S-36834B which is cancelled. This Commercial Item Description covers a

2、nonwoven fabric, disposable bedsheet. Salient characteristics: The bedsheet shall be a nonwoven fabric, disposable sheet, rectangular in appearance with all edges straight and even. The sheet shall be furnished in the following sizes and colors: Size 1 - 96 inches long by 60 inches wide, white Size

3、2 - 72 inches long by 40 inches wide, aqua or blue Size 3 - 84 inches long by 40 inches wide, aqua or blue Tolerances on the above bedsheet dimensions shall be plus or minus 4 inches. The nonwoven fabric shall be fabricated from any of the following compositions at the manufacturers option. The fini

4、shed nonwoven fabric shall be soft, have good draping and hand (feel). The finished nonwoven fabric shall not have an objectionable odor and shall be non-irritating and non-toxic. a. The nonwoven fabric shall consist of 60 plus or minus 5 percent bleached chemical pulp tissue, 15 plus or minus 5 per

5、cent viscose rayon fibers (2 inch average staple length) and 25 plus or minus 5 percent plastisol bonding and fire retardant agents. The fabric shall be constructed by laminating two layers of tissue having sandwiched between them two layers of oriented rayon fibers. One layer of the rayon fiber sha

6、ll be placed in the cross direction. AMSC N/A FSC 7210 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. 0 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-5 4 2 12 b. The nonwoven fabric shall consist of 40 plus or

7、 minus 5 percent viscose rayon fibers and 60 plus or niinus 5 percent bleached chemical pulp tissue bonded with a resin adhesive and fire retardant agents. The fabric shall be made from a carded web or randomized web structure. c. The nonwoven fabric shall consist of 45 plus or niinus 5 percent blea

8、ched chemical pulp tissue, 20 plus or minus 5 percent synthetic fibers, 35 plus or niinus 5 percent polymeric bonding and fire retardant agents. The fabric shall be constructed by laminating two layers of nonwoven tissue having sandwiched between them one layer of random or oriented continuous synth

9、etic filament fibers. d. The nonwoven fabric shall consist of 100, plus O, minus 5 percent viscose rayon fibers bonded with a resin adhesive and fire retardant agents. The fabric shall be an all-textile product made from a carded web or randomized web structure. e. The nonwoven fabric shall consist

10、of 87 plus or minus 5 percent chemical pulp tissue, 1-1/2 plus or minus 1/2 percent oriented continuous synthetic yarns in a nonwoven scrim and 11-1/2 plus or minus 5 percent bonding and fire retardant agents. The fabric shall be constructed by laminating one or two layers of tissue on each side of

11、the scrim reinforcing network. f. The nonwoven material shall consist of 60 plus or minus 5 percent bleached chemical pulp tissue, 15 plus or minus 5 percent rayon and polyester fiber blend (2 inch average staple length), and 25 plus or minus 5 percent plastisol bonding and fire retardant agents. Th

12、e material shall be constructed by laminating two layers of tissue having sandwiched between them one layer of random or oriented fibers. One layer of the fibers shall be placed in the cross direction. g. The nonwoven material shall consist of 60 plus or minus 5 percent bleached chemical pulp tissue

13、, 15 plus or minus 5 percent synthetic fibers (2 inch average staple length), and 25 plus or minus 5 percent plastisol bonding and fire retardant agents. The material shall be constructed by one layer or by laminating two layers of nonwoven tissue having sandwiched between them two layers of oriente

14、d or random synthetic fibers. One layer of the synthetic fiber may be placed in the cross direction. 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-9 _- A-A-5q212 72 7777774 0056536 7 A-A-5 4 2 12 h. The fabric shall be nonwoven (saturation bonded

15、 wet laid) manufactured from cellulosic or synthetic fiber or a combination of both. The nonwoven fabric shall be resin saturated. i. The nonwoven material shall be spunbonded polypropylene. The nonwoven fabric shall have the following properties: Weight (minimum) - 39.3 grams per square meter or 1.

16、15 ounces per square yard. Tensile strenqth. Machine direction - 3.5 pounds per inch minimum Cross direction - 1.0 pounds per inch minimum Flame resistance - 8 seconds minimum Color fastness to: Water - Good Crocking Wet and Dry - Not lower than Munsel Value 8.0 Each bedsheet shall be clean, free fr

17、om any break, tear, hole, wrinkle, uneven or ragged edge, foreign material, spot, stain, mend, or patch. oil or grease, fiber clump, insect, smudge, dirt, sharp object, bonding material strike-through, congealed mass of the bonding material, or spot or stain resulting from excess bonding. material .

18、 The bedsheet shall not contain any spot of The bedsheet shall be tested using the following standards from American Society for Testing and Materials (ASTM), Technical Association of the Pulp and Paper Industry (TAPPI), and National Fire Protection Association (NFPA): 3 Provided by IHSNot for Resal

19、eNo reproduction or networking permitted without license from IHS-,-,- _ I_ _ A-A-54212 72 9979374 0056537 7 A-A-54 2 12 Property Test Weight ASTM D-1910-64 Tensile strength TAPPI-T494 OM81 Flame resistance NFPA 702 Toxic i ty Any standard method Certificates of quality, supplied by the manufacturer

20、 of the materials, may be furnished in lieu of actual performance of such testing by the contractor. The certificate shall include the name of the contractor, the contract number, the name of the manufacturer or supplier, the NSN, the item identification, the name of the component/material, the lot

21、number, the lot size, the sample size, the date of testing, the test method, individual test results, and the specification requirements. be acceptable in lieu of a certificate of quality, provided the manufacturer can establish that adequate controls were applied to assure compliance with the speci

22、fication requirements. The sheets shall be uniformly and neatly folded. Multiple quantities of sheets may be bundled, banded, or bagged in unit package at the option of the contractor. Workmanship. The nonwoven bedsheet shall be free from defects A certificate of compliance shall which detract from

23、its appearance or impair its serviceability. - Unit. Package (PG). One package containing one hundred sheets of one color, and size, as specified, constitutes one unit. Quality Assurance Provisions. the contract or purchase order, the contractor is responsible for the performance of all inspection r

24、equirements as specified herein. purchase order, the contractor may use his own 01: any facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the Government. The Government reserves the right to perform any of the inspections set forth in the

25、specification where such inspections are deemed necessary to assure supplies and services conform to prescribed requirements. Responsibility for inspection. Unless otherwise specified in Except as otherwise specified in the contract or 4 Provided by IHSNot for ResaleNo reproduction or networking per

26、mitted without license from IHS-,-,-A-A-54212 72 U 7777774 005b538 O A-A-54 2 12 Records. Records of examinations and tests performed by or for the contractor shall be maintained by the contractor and made available to the Government upon the Governments request, at any time, or from time to time, d

27、uring the performance of the contract and for a period of three years after delivery of the supplies to which such records relate. Inspection. Inspection, as used herein, is defined as both examination (such as visual or auditory investigation without the use of special laboratory appliances or proc

28、edures) and testing (determination by technical means of physical and chemical properties) of the item. Samplinq for examination. Sampling for examination shall be The unit of conducted in accordance with MIL-STD-105, with an AQL of 4.0 (percent defective) and an inspection level of II. product for

29、examination purposes shall be one nonwoven bed sheet. Samplinq for tests (bedsheet). Sampling for dimensional tests shall be conducted in accordance with MIL-STD-105, with an AQL of 4.0 (percent defective) and an inspection level of S-3. The unit of product for test purposes shall be one nonwoven be

30、d sheet. Samplinq for tests (fabric). Sampling for the testing of the fabric shall be as follows: Lot size (yards) Sample size 800 or less 2 801 and up to and including 22,000 3 22,001 and over 5 The sample unit of fabric for test purposes shall be one linear yard of the fabric. The samples shall be

31、 taken from the beginning of each roll. more sample units fail to meet any of the fabric property requirements. The lot shall be unacceptable if one or Tests. Tests shall be conducted to determine compliance with specification requirements. shall be used for the determination of two or more test cha

32、racteristics. Where feasible, the same sample 5 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-. _ -_ - - - A-A-54212 72 W 7777774 0056537 2 W A-A-542 12 Metric products. Products manufactured to metric dimensions will be considered on an equal basi

33、s with those manufactured using inch-pound units, providing they fall within the tolerances specified using conversion tables contained in the latest revision of Federal Standard 376, and all other requirements of this document are met. If a product is manufactured to metric dimensions and those dim

34、ensions exceed the tolerances specified in the inch/pound units, a request should be made to the contracting officer to determine if the product is acceptable. The contracting officer has the option of accepting or rejecting the product. the product offered meets the salient characteristics of this

35、description and conforms to the producers own drawings, specifications, standards, and quality assurance practices. The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract. Con

36、tractor certification. The contractor shall certify that Regulatory requirements. by this document has been determined by the U.S. Food and Drug Administration to be under its jurisdiction, the offeror/contractor shall comply, and be responsible for compliance by its subcontractors/suppliers, with t

37、he requirements of the Federal Food, Drug and Cosmetic Act, as amended, and regulations promulgated thereunder. In addition, the offeror/contractor shall comply, and be responsible for compliance by its subcontractors/suppliers, with the requirements of all other applicable Federal, State, and local

38、 statutes, ordinances, and regulations. Federal Food, Drug and Cosmetic Act. If the product covered Recovered materials. The offeror/contractor is encouraged to use recovered material in accordance with Federal Acquisition Regulation Subpart 23.4 to the maximum extent practical. 6 Provided by IHSNot

39、 for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-54212 72 7777774 005b540 7 A-A-5 4 2 12 Preservation, packaginq, p acking, labelinq, and markinq. Unless otherwise specified, preservation, packaging, and packing shall be to a degree of protection to preclude damage

40、 to containers and/or contents thereof under normal shipping conditions, handling, etc., involving shipment from the supply source to the receiving activity, plus reshipment from receiving activity, and shall conform to applicable carriers rules and regulations. Intermediate and exterior package qua

41、ntities and labeling and marking shall be as specified in the contract and/or order. Orderinq data. Intermediate/exterior package quantities, labeling, and marking must be specified in the contract and/or order. NOTE: The following National Stock Numbers are covered by this document : 7210-00-144-60

42、82 (Size 1) 7210-00-498-0512 (Size 2) 7210-00-139-6376 (Size 3) . MILITARY INTERESTS: PREPARING ACTIVITY: Custodians: DoD - MB Army - MD Navy - MS Air Force - 03 Agent: DLA-DM CIVIL AGENCY COORDINATING ACTIVITIES: VA-OSS USPHS FDA-MPQAS 7 Project No. 7210-0282 Location: CID/SHEET/BED/H13-37 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-