DOD A-A-54425-1991 CLAMPS ARTERY DEBAKEY SHALLOW U JAWS《浅的烘烤动脉夹子》.pdf

1、A-A-54 4 2 5 14 June 1991 COMMERCIAL ITEM DESCRIPTION CLAMPS, ARTERY, DEBAKEY, SHALLOW “U“ JAWS The General Services Administration has authorized the use of this Commercial Item Description as a replacement for Military Specification MIL-C-37548 which is cancelled. This Commercial Item Description

2、covers artery clamps of the DeBakey design suitable for accomplishing hemostatic in delicate tissue. Salient characteristics: General. Shall be artery occlusion clamps of the DeBakey design, capable of providing a firm, non-slip, triangular grasp, for accomplishing hemostasis without causing trauma

3、to the tissue. The clamps specified herein shall be of the Sizes - Overall Lenqth ( Inches) 1 - 11 2 - 10-3/4 3 - 10-1/2 4 - 10 5 - 8-1/4 following sizes and styles: Style-Length of Jaws (Centimeters) A - 7.5 B - 6.0 c - 5.5 D - 4.8 E - 3.7 Material. The clamp saLa be fabricated from class 4, type 4

4、10, 416 or type 420 corrosion-resisting stainless steel in accordance with ASTM F899. AMSC N/A FSC 6515 DISTRIBUTION STATEMENT A. distribution is unlimited. Approved for public release; I Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-54425 65 R

5、 9999974 0061577 2 l 8; I A-A-54425 Hardness. The clamps shall have a Rockwell Hardness C Scale (HRC) of C36 to C41 for type 416 material, C38 to C44 for 410 material, and C40 to C47 for type 420 material when tested in accordance with ASTM E18 or E92 whichever is applicable. Conversion of hardness

6、values shall be in accordance with ASTM E140. Style, desiqn and dimensions. The clamps shall be in accordance with Defense Personnel Support Center (DPSC) Drawing No. 20901 for style, design and dimensions. Performance. The clamps shall be capable of meeting applicable requirements of ASTM F1026. Fi

7、nish. The clamps shall have mirror, satin, or matte finish. Passivation. The clamps shall be properly passivated. Corrosion resistance. The clamps shall show no evidence of corrosion when tested for corrosion resistance in accordance with ASTM F1089. Identification markinq and labelincr. The clamps

8、shall be legibly marked with the contractorls name or registered trademark and the word llstainlessll. Foreign manufactured clamps shall bear the name of the country of origin. WorkmanshiD. The clamps shall be free from defects which detract from its appearance or impair its serviceability. Unit. Ea

9、ch (EA). One clamp, as specified, constitutes one unit. QUALITY ASSURANCE PROVISIONS. Responsibility for inspection. Unless otherwise specified in the contract or purchase order, the contractor is responsible for the performance of all inspection requirements as specified herein. Except otherwise sp

10、ecified in the contract or purchase order, the contractor may use his own or any facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the Government. The Government reserves the right to perform any of the inspections set forth in the specifi

11、cation where such inspections are deemed necessary to assure supplies and services conform to prescribed requirements. 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-54425 b5 m 9999974 00bL578 4 m t p- 9- A-A-5 4 4 2 5 Records. Records of exam

12、inations and tests performed by or for the contractor shall be maintained by the contractor and made available to the Government upon request, at any time, or from time to time, during the performance of the contract and for a period of three years after delivery of the supplies to which such record

13、s relate. Inspection. Inspection, as used herein, is defined as both examination (such as visual or auditory investigation without the use of special laboratory applicants or procedures) and testing (determination by technical. means and chemical properties) of the item. Samplins for examination. Sa

14、mpling for examination shall be conducted in accordance with MIL-STD-105 and as specified herein. Unit of product for examination purposes shall be one clamp. Sampling shall be Inspection level II with an acceptable quality level (AQL) of 1.0. Examination. Examination shall be conducted to determine

15、 compliance with specification requirements. accordance with MIL-STD-105 and as specified herein. product for test purposes shall be one clamp. Inspection level 5-2 with an AQL of 1.0. specification requirements. shall be used for the determination of two or more test characteristics. Samplins for t

16、ests. Sampling for tests shall be conducted in Sampling shall be Tests shall be conducted to determine compliance with Unit of Tests. Where feasible, the same sample Contractor certification. The contractor shall certify that the product offered meets the salient characteristics of this description

17、and conforms to the producers own drawings, specifications, standards, and quality assurance practices. The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract. 3 Provided by I

18、HSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-54425 b5 7779974 0063579 b m A-A-54 4 2 5 Metric Droducts. Products manufactured to metric dimensions will be considered on an equal basis with those manufactured using inch-pound units, providing they fall with

19、in the tolerance specified using conversion tables contained in the latest revision of Federal Standard No. 376, and all other requirements of this document are met. If a product is manufactured to metric dimensions and those dimensions exceed the tolerances specified in the inch/pound units, a requ

20、est should be made to the contracting officer to determine if the product is acceptable. The contracting officer has the option of accepting or rejecting the product. Requlatorv requirements. Federal Food, Druq, and Cosmetic Act. If the product covered by this document has been determined by the U.S

21、. Food and Drug Administration to be under its jurisdiction , the offeror/contractor shall comply, and be responsible for compliance by its subcontractors/suppliers, with the requirements of the Federal Food, Drug Cosmetic Act, as amended, and regulations promulgated thereunder. In addition, the off

22、eror/contractor shall comply, and be responsible for compliance by its subcontractors/suppliers, with the requirements of all other applicable Federal State, and local statutes, ordinances, and regulations. Recovered material. The offeror/contractor is encouraged to use recovered material in accorda

23、nce with Federal Acquisition Regulation Subpart 23.4 to the maximum extent practical. Preservation, packasins, D ackins, labelins, and markins. Unless otherwise specified, preservation, packaging, and packing shall be to a degree of protection to preclude damage to containers and/or contents thereof

24、 under normal shipping conditions, iiuiiurriiy, LiLb., riivurvrliy akfpment from the supply source to the receiving activity, plus reshipment from receiving activity, and shall conform to applicable carriers rules and regulations. Intermediate and exterior package quantities and labeling and marking

25、 shall be as specified in the contract and/or order. . - _. -77 1- - -L- .!-I,:, 4 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-54 4 2 5 Orderins data. (Intermediate/exterior package quantities and labeling and marking must be specified in the

26、 contract and/or order). 0 document : “ 6515-00-690-3225 NOTE: The following National Stock Numbers are Item Identification 6515-00-690-3227 6515-00-690-3236 6515-00-690-3237 6515-00-690-3238 CLAMP, ARTERY, DeBakey , Shallow W1 Jaws, Partial Tangential Occlusion, 11 Inch, 7.5 cm Jaw. CLAMP, ARTERY,

27、DeBakey , Shallow Wit Jaws, Partial Tangential Occlusion, 10-3/4 Inch, 6.0 cm Jaw. CLAMP, ARTERY, DeBakey , Shallow llU1t Jaws, Partial Tangential Occlusion, 10-1/2 Inch, 5.5 crn Jaw. CLAMP, ARTERY, DeBakey , Shallow TJ1l Jaws, Partial Tangential Occlusion, 10 Inch, 4.8 cm Jaw. CLAMP, ARTERY, DeBake

28、y, Shallow TJl1 Jaws, Partial Tangential Occlusion, 8-1/4 Inch, 3.7 cm Jaw. MILITARY INTERESTS: Custodians: Amy-MD Navy-MS Air Force-03 CIVIL AGENCY COORDINATING ACTIVITIES VA-OSS USPHS FDA-MPQAS covered by this Size Style PREPARING ACTIVITY: DoD-MB Agent : DLA-DM A B C D E 5 Project No. 6515-5026 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-