DOD A-A-54513-1992 SCISSORS BANDAGE ANGULAR LISTER《有角的绷带剪刀》.pdf

1、A-A-54513 65 m 9999974 00b4347 O W A-A-54 5 13 6 March 1992 COMMERCIAL ITEM DESCRIPTION SCISSORS, BANDAGE, ANGULAR, LISTER The General Services Administration has authorized the use of this Commercial Item Description as a replacement for Military Specification MIL-S-36061A which is cancelled. This

2、Commercial Item Description covers angular bandage scissors of the Lister design. Salient characteristics: General. The bandage scissors shall be suitable for use in the removal of surgical bandages of the Lister design and be of the followina sizes: a Size Eensth ( inch-es 1 1 5-1/2 2 7-1/4 The ban

3、dage scissors shal.1 be fabricated from class 4, martensitic stainess steel in accordance with ASTM F899. Hardness. The bandage scissors shall have a Rockwell hardness C Scale (HRC) of C50 to C55 when tested in accordance with ASTM E18 or E92 whichever is applicable. Conversion of hardness values sh

4、all be in accordance with ASTM E140. Ctvle, desisn and hmensions. The bandage scissors shall be In accordance with Figure 1 for style, design and dimensions. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-54513 b5 = 7999974 00b4348 2 m A-A-54 5

5、13 Performance meeting the cutting ability performance requirements for stockinette material in accordance with Table 3 for heavyweight scissors of ASTM F1079. The bandage scissors shall be capable of Finish. matte finish. cracks, pits, crevices, burrs, grind or tool marks and dirt or polishing mate

6、rial. The bandage scissors shall have a mirror, satin, or The finish shall be uniform and free from Passivation. passivated. The bandage scissors shall be properly Corrosion resistance. evidence of corrosion or plating of copper when tested for in accordance with ASTM Fl89. The bandage scissors shal

7、l show no Identification markins and labelins. shall be legibly marked with the contractors name or registered trademark and the word llstainlesslw. manufactured bandage scissors shall bear the name of the country of origin. The bandage scissors Foreign WorkmanshiD. defects which detract from its ap

8、pearance or impair its serviceability. Unit. Each (EA). One bandage scissors of the size specified, constitutes one unit. The bandage scissors shall be free from QUALITY ASSURANCE PROVISIONS. Responsibility for inspection. Unless otherwise specified in the contract or purchase order, the contractor

9、is responsible for the performance of all inspection requirements as specified herein. Except otherwise specified in the contract or purchase order, the contractor may use his own or any facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by th

10、e Government. reserves the right to perform any of the inspections set forth in the specification where such inspections are deemed necessary to assure supplies and services conform to prescribed requirements. The Government Records. Records of examinations and tests performed by or for the contract

11、or shall be maintained by the contractor and made available to the Government upon request, at any time, or from time to time, during the performance of the contract and for a period of three years after delivery of the supplies to which such records relate. 2 Provided by IHSNot for ResaleNo reprodu

12、ction or networking permitted without license from IHS-,-,-A-A-54513 65 9999974 O064349 4 W A-A- 5 4 5 13 Inspection. Inspection, as used herein, is defined as both examination (such as visual or auditory investigation without the use of special laboratory appliances or procedures) and testing (dete

13、rmination by technical means of physical and chemical properties) of the item. O Samplinq for examination. Sampling for examination shall be conducted in accordance with MIL-STD-105 and as specified herein. Unit of product for examination purposes shall be one bandage scissors. Sampling shall be Ins

14、pection level II with an acceptable quality level (AQL) of 1.0. Examination. Examination shall be conducted to determine compliance with specification requirements. Samplins for tests. Sampling for tests shall be conducted in accordance with MIL-STD-105 and as specified herein. Unit of product for t

15、est purposes shall be one bandage scissors. Sampling shall be Inspection level S-2 with an AQL of 1.0. Tests. Tests shall be conducted to determine compliance with specification requirements. Where feasible, the same sample shall be used for the determination of two or more test characteristics. Con

16、tractor certification. The contractor shall certify that the product offered meets the salient characteristics of this description and conforms to the producers own drawings, specifications, standards, and quality assurance practices. The Government reserves the right to require proof of such confor

17、mance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract. 0 Metric products. Products manufactured to metric dimensions will be considered on an equal basis with those manufactured using inch-pound units, providing they fall within the tolera

18、nce specified using conversion tables contained in the latest revision of Federal Standard No. 376, and all other requirements of this document are met. If a product is manufactured to metric dimensions and those dimensions exceed the tolerances specified in the inch/pound units, a request should be

19、 made to the contracting officer to determine if the product is acceptable. The contracting officer has the option of accepting or rejecting the product. 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-54513 65 9999974 0064350 O A-A-54 5 13 Res

20、ulatorv reauirements. Federal Food, Drua, and Cosmetic Act. If the product covered by this document has been determined by the U.S. Food and Drug Administration to be under its jurisdiction , the offeror/contractor shall comply, and be responsible for compliance by its subcontractors/suppliers, with

21、 the requirements of the Federal Food, Drug, and Cosmetic Act, as amended, and regulations promulgated thereunder. In addition, the offeror/contractor shall comply, and be responsible for compliance by its subcontractors/suppliers, with the requirements of all other applicable Federal, State, and lo

22、cal statutes, ordinances, and regulations. Recovered material. The offeror/contractor is encouraged to use recovered material in accordance with Federal Acquisition Regulation Subpart 23.4 to the maximum extent practical. Preservation, packasins, p ackins, labelins, and markins. Unless otherwise spe

23、cified, preservation, packaging, and packing shall be to a degree of protection to preclude damage to containers and/or contents thereof under normal shipping conditions, handling, etc:, involving shipment from the supply source to the receiving activity, plus reshipment from receiving activity, and

24、 shall conform to applicable carriers rules and regulations. Intermediate and exterior package quantities and labeling and marking shall be as specified in the contract and/or order. Orderins data. (Intermediate/exterior package quantities and labeling and marking must be specified in the contract a

25、nd/or order). NOTE: document : The following National Stock Numbers are covered by this - NSN Item Identification SIZE 6515-00-363-8800 SCISSORS, BANDAGE, ANGULAR, 1 6515-00-363-8840 SCISSORS, BANDAGE, ANGULAR, 2 Lister, 5-1/2 Inch. Lister, 7-1/4 Inch. 4 Provided by IHSNot for ResaleNo reproduction

26、or networking permitted without license from IHS-,-,-A-A-54513 65 9999974 0064353 2 MILITARY INTERESTS: Custodians: Amy-MD Navy-MS Air Force-03 CIVIL AGENCY COORDINATING ACTIVITIES: A-A-54 5 13 PREPARING ACTIVITY: DoD-MB Agent : DLA-DM VA-OSS USPHS FDA-MPQAS Project No. 6515-5199 5 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-54513 65 m 9999974 0064352 4 m u w o w o e + I O I . c 6 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-