DOD A-A-54757-1992 PAD COTTON GAUZE COVERED (EYE PAD)《铁纱罩棉花衬垫(眼睛垫)》.pdf

1、A-A-54757 b5 W 9999974 0093762 722 I INCH-POUND I A-A-54757 30 September 1992 COMMERCIAL ITEM DESCRIPTION PAD, COTTON, GAUZE COVERED (EYE PAD) The General Services Administration has authorized the use of this Commercial Item Description as a replacement for Federal Specification DDD-P-50 which is c

2、ancelled. This Commercial Item Description covers a cotton pad covering for the eye. Salient Characteristics: Shall be a sterile gauze covered cotton pad suitable for use as a protective covering for the eye and shall be suitable for use as an eye dressing. tested in accordance with the USP. The pad

3、s shall be sterile when The filler shall be cotton which meets the requirements of Purified Cotton, USP, except for fiber length and absorbency. When tested in accordance with the USP, not less than 40% of the fibers by weight shall be 12.5 mm or greater in length, and not more than 20% by weight sh

4、all be 6.25 mm or less in length. When tested for absorbency in accordance with the USP, the cotton shall submerge in 10 seconds or less and shall retain not less than 20 times its weight of water. bleached, fine filament, purified new or new reworked cotton such as comber noilsor card strips and sh

5、all not contain cotton linters or cotton which has been reworked from yarns, thread or fabric. The cotton shall be substantially free of lumps, oil spots, foreign odor and foreign matter. The cotton shall be made from fully The gauze shall meet the requirements of Type I Absorbent. Gauze, USP. FSC 6

6、510 AMSCNA DISTRIBUTION STATEMENT A. distribution is unlimited. Approved for public release; Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-54757 65 m 9999974 0093763 669 m A-A-5 4 7 5 7 The pad shall be composed of the cotton filler covered top

7、 and bottom each with a single thickness of gauze. The edges of the pad shall be uncovered. The pads shall be oval shaped having overall minimum dimensions of 2-3/8 inches long by 1-13/16 inches wide. The finished pad shall have a minimum weight of 1.0 grams after being conditioned in accordance wit

8、h Section 4 of Federal Test Method Standard 191. The gauze covering shall be free of holes, cuts and tears. The finished pads shall be free from dirt, ravelings and foreign matter. The cotton filler shall not be frayed. Workmanshin. The Pads shall be free from defects which detract from their appear

9、ance or impair their serviceability. Unit. Package (PG). Each pad shall be individually packaged in a sealed suitable paper envelope capable of maintaining sterility of contents unless package is damaged or opened. One package containing 50 individually packaged pads, as specified, constitutes one u

10、nit. ualitv Assurance Provisions. ResDonsibilitv for insDection. Unless otherwise specified in the contract or purchase order, the contractor is responsible for the performance of all inspection requirements as specified herein. purchase order, the contractor may use his own or any facilities suitab

11、le for the performance of the inspection requirements specified herein, unless disapproved by the Government. The Government reserves the right to perform any of the inspections set forth in the specification where such inspections are deemed necessary to assure supplies and services conform to pres

12、cribed requirements. Except as otherwise specified in the contract or Records. Records of examinations and tests performed by or for the contractor shall be maintained by the contractor and made available to the Government upon the Governments request, at any time, or from time to time, during the p

13、erformance of the contract and for a period of three years after delivery of the supplies to which such records relate. Inspection. Inspection, as used herein, is defined as both examination (such as visual or auditory investigation without the use of special laboratory appliances or procedures) and

14、 testing (determination by technical means of physical and chemical properties) of the item. 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-54757 65 9999974 0093764 5T5 A-A-54757 Examination. Examination shall be conducted to determine complia

15、nce with specification requirements. Tests. Tests shall be conducted to determine compliance with specification requirements. Where feasible, the same sample shall be used for the determination of two or more test characteristics. Contractor certification. The contractor shall certify that the produ

16、ct offered meets the salient characteristics of this description and conforms to the producers own drawings, specifications, standards, and quality assurance practices. The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise p

17、rovided for under the provisions of the contract. Metric Products. Products manufactured to metric dimensions will be considered on an equal basis with those manufactured using inch-pound units, providing they fall within the tolerance specified using conversion tables contained in the latest revisi

18、on of Federal Standard No. 376, and all other requirements of this document are met. If a product is manufactured to metric dimensions and those dimensions exceed the tolerance specified in the inch/pound units, a request should be made to the contracting officer to determine if the product is accep

19、table. The contracting officer has the option of accepting or rejecting the product. Reaulatorv reauirements. Federal Food, Drua and Cosmetic Act. If the product covered by this document has been determined by the U.S. Food and Drug Administration to be under its jurisdiction, the offeror/contractor

20、 shall comply, and be responsible for compliance by its subcontractors/suppliers, with the requirements of the Federal Food, Drug and Cosmetic Act, as amended, and regulations promulgated thereunder. In addition, the offeror/contractor shall comply, and be responsible for compliance by its subcontra

21、ctors/suppliers, with the requirements of all other applicable Federal, State, and local statutes, ordinances, and regulations. 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-54757 65 9999974 0073765 431 = A-A-5 4 7 57 Recovered materials. The

22、 offeror/contractor is encouraged to use recovered material in accordance with Federal Acquisition Regulation Subpart 23.4 to the maximum extent practical. Preservation. riackauina. D ackina, labelina and marking. Unless otherwise specified, preservation, packaging, and packing shall be to a degree

23、of protection to preclude damage to containers and/or contents thereof under normal shipping conditions, handling, etc., involving shipment from the supply source to the receiving activity, plus reshipment from receiving activity, and shall conform to applicable carriers rules and regulations. Inter

24、mediate and exterior package quantities and labeling and marking shall be as specified in the contract and/or order. Ordering data. labeling and marking must be specified in the contract and/or order. Intermediate/exterior package quantities and NOTE: The following National Stock Number is covered b

25、y this document : - NSN 6510-01-107-7575 MILITARY INTERESTS: Custodians: Army - MD Navy - MS Air Force - 03 ITEM IDENTIFICATION PAD, COTTON, GAUZE COVERED, 2-1/2 by 2-1/8 Inches, 50s PREPARING ACTIVITY: DoD - MB Agent: DU-DM CIVIL AGENCY COORDINATING ACTIVITY: VA-OSS USPHS FDA-MPQAS PGC 44309 4 Project No. 6510-0829 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-