DOD A-A-54842-1993 SCISSORS GENERAL SURGICAL MAYO《普通外科剪刀》.pdf

1、b A-A-54842 9999974 0343764 738 = INCH-POUND A-A-5484 2 30 April 1993 COMMERCIAL ITEM DESCRIPTION SCISSORS, GENERAL SURGICAL, MAYO The General Services Administration has authorized the use of this Commercial Item Description as a replacement for Military Specification MIL-S-36057A which is cancelle

2、d. This Commercial Item Description covers general surgical scissors of the Mayo design suitable for use as dissecting scissors in general surgery. Salient characteristics: General. The scissors shall be of the following types: TYPE I - Curved Size 1 - 5-1/2 inches overall length. Size 2 - 6-3/4 inc

3、hes overall length. Size 3 - 9 inches overall length. TYPE II - Straight Size 1 - 5-1/2 inches overall length. Size 2 - 6-3/4 inches overall length. Material. The scissors shall be fabricated from class 4, martensitic corrosion-resisting steel, in accordance with ASTM F899. Hardness. The scissors sh

4、all have a Rockwell hardness Scale (HRC) of C50 to C55 with the exception of the screw which shall have a Rockwell hardness (HRC) of C40 to C45. The hardness shall be tested in accordance with ASTM E18 or E92 whichever is applicable. Conversion of hardness values shall be in accordance with ASTM E14

5、0. AMSC N/A FSC 6515 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-54842 rn 9999974 01437b5 674 rn A-A-5 4 8 4 2 Stvle, desiun and dimensions. The scissors shall

6、be in accordance with Figures 1 and 2 for style, design and dimensions. Performance accordance with the applicable requirements of ASTM F1079. The scissors shall be capable of cutting a continuous length of at least 3/4 inch for Type I and II; Size 1, and 7/8 inch for Type I and II; Size 2, and 1-1/

7、8 inch for Type I, size 3. The performance of the scissors shall be in Finish. The scissors shall have a mirror finish, except inside blades shall be crocus. Passivation. Corrosion resistance. The scissors shall show no evidence of corrosion or plating of copper when tested for corrosion resistance

8、in accordance with ASTM F1089. The scissors shall be properly passivated. Identification markina and labelina. The scissors shall be legibly marked with the contractors name or registered trademark and the word gstainlessll. Foreign manufactured scissors shall bear the name of the country of origin.

9、 WorkmanshiD. The scissors shall be free from defects which detract from their appearance or impair their serviceability. Unit. Each (EA). One scissors, of the type specified, constitutes one unit. QUALITY ASSURANCE PROVISIONS. ResDonsibilitv for insDection. Unless otherwise specified in the contrac

10、t or purchase order, the contractor is responsible for the performance of all inspection requirements as specified herein. purchase order, the contractor may use his own or any facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the Governme

11、nt. The Government reserves the right to perform any of the inspections set forth in the specification where such inspections are deemed necessary to assure supplies and services conform to prescribed requirements. Except as otherwise specified in the contract or 2 Provided by IHSNot for ResaleNo re

12、production or networking permitted without license from IHS-,-,-A-A-54842 W 9999974 0143766 500 W A-A-54842 Records. Records of examinations and tests performed by or for the contractor shall be maintained by the contractor and made available to the Government upon request, at any time, or from time

13、 to time, during the performance of the contract and for a period of three years after delivery of the supplies to which such records relate. Inspection. Inspection, as used herein, is defined as both examination (such as visual or auditory investigation without the use of special laboratory applian

14、ces or procedures) and testing (determination by technical means of physical and chemical properties) of the item. Samplins for examination. Sampling for examination shall be conducted in accordance with MIL-STD-105 and as specified herein. Unit of product for examination purposes shall be one sciss

15、ors. Sampling shall be Inspection level II with an acceptable quality level (AQL) of 1.0. Examination. Examination shall be conducted to determine compliance with specification requirements. accordance with MIL-STD-105 and as specified herein. product for test purposes shall be one scissors. be Insp

16、ection level S-2 with an AQL of 1.0. specification requirements. Where feasible, the same sample shall be used for the determination of two or more test characteristics. Samplins for tests. Sampling for tests shall be conducted in Unit of Sampling shall Tests shall be conducted to determine complian

17、ce with Tests. O Contractor Certification. maintain substantiating evidence that the product offered meets the salient characteristics of this Commercial Item Description, and that the product conforms to the producers own drawings, specifications, standards, and quality assurance practices. The gov

18、ernment reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract. The contractor shall certify and 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from I

19、HS-,-,-A-A-54 8 4 2 O e I O Metric Droducts. Products manufactured to metric dimensions will be considered on an equal basis with those manufactured using inch-pound units, providing they fall within the tolerance specified using conversion tables contained in the latest revision of Federal Standard

20、 No. 376, and all other requirements of this document are met. If a product is manufactured to metric dimensions and those dimensions exceed the tolerances specified in the inch/pound units, a request should be made to the contracting officer to determine if the product is acceptable. The contractin

21、g officer has the option of accepting or rejecting the product. Regulatory reauirements. by this document has been determined by the U.S. Food and Drug Administration to be under its jurisdiction , the offeror/contractor shall comply, and be responsible for compliance by its subcontractors/suppliers

22、, with the requirements of the Federal Food, Drug, and Cosmetic Act, as amended, and regulations promulgated thereunder. In addition, the offeror/contractor shall comply, and be responsible for compliance by its subcontractors/suppliers, with the requirements of all other applicable Federal, State,

23、and local statutes, ordinances, and regulations. use recovered material in accordance with Federal Acquisition Regulation Subpart 23.4 to the maximum extent practical. Preservation, Dackasina, D ackins, labelincl, and markina. Unless otherwise specified, preservation, packaging, and packing shall be

24、 to a degree of protection to preclude damage to containers and/or contents thereof under normal shipping conditions, handling, etc:, involving shipment from the supply source to the receiving activity, plus reshipment from receiving activity, and shall conform to applicable carriers rules and regul

25、ations. Intermediate and exterior package quantities and labeling and marking shall be as specified in the contract and/or order. Orderins data. (Intermediate/exterior package quantities and labeling and marking must be specified in the contract and/or order). Federal Food, Drus, and Cosmetic Act. I

26、f the product covered Recovered material. The offeror/contractor is encouraged to 4 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-54842 9999974 0143768 383 A-A454 8 4 2 NOTE: The following National Stock Numbers are covered by this document : -

27、 NSN Item Identification TYPE SIZE 6515-00-364-0500 SCISSORS, GENERAL SURGICAL, I 1 Curved, Mayo, 5-1/2 inch. 6515-00-364-0520 SCISSORS, GENERAL SURGICAL, I 2 Curved, Mayo, 6-3/4 inch. 6515-00-364-0560 SCISSORS, GENERAL SURGICAL, I 3 Curved, Mayo, 5-1/2 inch. 6515-00-364-0900 SCISSORS, GENERAL SURGI

28、CAL, II 1 Straight, Mayo, 5-1/2 inch. 6515-00-364-0920 SCISSORS, GENERAL SURGICAL, II 2 Straight, Mayo, 6-3/4 inch. MILITARY INTERESTS: PREPARING ACTIVITY: Custodians: DoD-MB Amy-MD Navy-MS Air Force-03 Agent: DLA-DM CIVIL AGENCY COORDINATING ACTIVITIES: VA-OSS USPHS FDA-MPQAS Project No. 6515-5581

29、5 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A- 5 4 84 2 A-A-54842 9999974 0343769 2LT W 1 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-L A-A-54842 rn 9999974 0343770 T33 rn A-A- 54842 I QI -i iu I- - q k? ? p L, L, 34 t t L, 7 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-