DOD MIL-C-37066-1974 CASE MEDICAL INSTRUMENT AND SUPPLY SET NYLON NONRIGID NO 6《6号非刚性尼龙医学器械供给装置容器》.pdf

1、MIL-C-3 7066 5 September 1974 MILITARY SPECIFICATION CASE, MEDICAL INSTRUMENT AND SUPPLY SET NYLON, NONRIGID, NO. 6 This specification is approved for use by all Departments and.Agencies of the Department of Defense. 1. SCOPE - 1.1 This specification covers an empty nylon case intended to hold instr

2、uments and supplies listed hereinafter,. and be suitable for use in minor surgical procedures in the field. 2. APPLICABLE DOCUMENTS 2.1 The following documents, of the issue in effect on the date of invitation for bids or request for proposals, form a part of this specification to the extent specifi

3、ed herein. .- SPECIFICATIONS Federal V-T-285 DDD-L-20 PPP-B- 5 6 6 PPP-B-5 85 PPP-By601 PPP-B- 6 21 PPP-B- 6 36 PPP-B-6 76 Military MIL-T-5038 MIL-F-21840 MIL-C-43128 Thread, Polyester Label; for Clothing, Equipage, and Tentage, (General Boxes , Foding, Paperbord Boxes, Wood, Wirebound Boxes , Cleat

4、ed-Plywood Boxes, Wood, Nailed and Lock-Corner Boxes, Shipping, Fiberboard Boxes, Setup Use) Tape, Textile and Webbing, Textile, Reinforcing, Nylon Fastener Tapes, Hook the sample size, the date of testing, the test method, individual test results, and the specification requirements. 4.2 Quality con

5、formance inspection. The examinations and tests required to assure conformance of those items or lots of items to be offered for acceptance are classified as specified in tables II and III (see 4.2.1 and 4.2.2) and 4.3, 4.2.1 Sampling for examination. Sampling for examination shall be conducted in a

6、ccordance with MIL-STD-105. The inspection levels and acceptable quality levels shall be as indicated in table II. purposes shall be one case, Unit of product For examination 5 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-C-370bb b5 m 77777Ob

7、0264375 3 m MIL-C- 3706 6 Table II. Sampliig for Visual Defects Inspection AQL (defects per level 100 units) Major II 2.5 Total (Major and Minor combined) II 6.5 4.2.2. Examination. The case shall be examined for defects including, but not limited to, those listed in table III, Table III. Classifica

8、tion of Defects Ma j or 101 102 103 10 4 105 106 107 108 109 110 111 112 Minor - 201 202 203 204 205 206 207 208 .209 6 Any component part missing. Any required operation omitted or improperly performed. Any hole, cut, tear, mend, patch or unauthorized splice. Needle chews that may develop into a ho

9、le. Any weakening defect such as smash, multiple float, or J.oose slub, that may develop into a hole. One or more spots or stains of an obviously permanent nature. Any seam twisted, puckered, affecting appearance or serviceability. Any open seam - 114 inch or more. Raw edges. - Tape fastener imprope

10、rly aligned. Tape fastener insecurely attached. Markings missing, incorrect , or illegible. One or more removable spots or stains clearly noticeable. Thread ends not trimmed. Any part of case pleated, twisted, or caught in any unrelated Seam type other than specified. Stitch type other than specifie

11、d. Less than 8 stitches per inch. Broken or skipped stitches, not amounting to an open seam, row of stitching. occurring twice or more in the same row of stitching. seam less than 114 inch. Open Ends of stitching backstitched less than 314 inch. Outlines of components not properly illustrated as spe

12、cified in Drawing. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-7 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Provided by IHSNot for ResaleNo reproduction or networking permitted without licens

13、e from IHS-,-,-MIL-C-37066 65 7773706 02611398 7 W MIL-C-37066 5.2.3 Level C. The subject commodity shall be packed in substantial commercial containers of the type, size, and kind commonly used for the purpose, so constructed as to insure acceptance and safe delivery by common or other carriers, at

14、 the lowest rate, to point of delivery called for in the contract or purchase order. 5.3 Marking. 5.3.1 Interior packages. Each intermediate package shall be marked in accordance with MIL-STD-129. When labels are utilized, waterproofing shall be required only when applicable carton is fabricated of

15、water-resistant material. Contract or purchase order number and name of contractor shall be shown. 5.3.2 Exterior container. Exterior container shall be marked in accordance with MIL-STD-129. 6. NOTES 6.1 Intended use. The case covered by this specification is a component of National Stock No. 6545-

16、00-957-7650, Surgical Instrument Set, Minor Surgery, and is used as the container for the items listed in 3.4. 6.2 Ordering data. Procurement documents should specify the following: (a) (b) Title, number; and date of this specification. Selection of applicable levels of packaging and packing (see 5.

17、1 and 5.2). 6.3 This specification is intended to cover the following item appearing in the Federal Supply Catalog: NSN - 6545-00-913-6525 Item Identification CASE, MEDICAL INSTRUMENT AND SUPPLY SET, Nylon, Nonrigid, No. 6 6.4 This specification does not include all types, classes, grades, sizes, et

18、c., of the commodity indicated by the title of this specification, or which are commercially available, but is intended to cover the types, etc., which are normally procured to meet military requirements. 6.5 Supersession data. This specification includes the requirements of Defense Medical Purchase Description No. 6, dated 12 January 1971 and Modification No. 1, dated 31 January 1973. 9 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-